Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Southwest Ranches
Door installation in Southwest Ranches costs between $2,800 and $14,000 for most custom estate homes, with impact-rated entry systems starting around $4,200 and custom barn door retrofits running $6,500 to $18,000 depending on opening size. Every door we install in Southwest Ranches must carry a Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval because the town sits inside Broward County’s High-Velocity Hurricane Zone. That’s not optional. It’s code, and it’s the reason most big-box doors never make it past inspection here. If you’re planning a door replacement on Stirling Road, Griffin Road, or anywhere off Hancock Road, call (863) 208-5172 and we’ll walk you through what your specific opening actually needs.
Why TruePane Windows & Doors Is Southwest Ranches’s Preferred Door Installation Company
We’ve worked on enough Southwest Ranches properties to know the difference between a door that looks right and one that’s done right. Dale Kessler founded this company on a simple rule: if the pane is not true, the job is not done. That rule applies to every jamb, threshold, and weather seal we touch. Homeowners here don’t have tract-home openings. They have ten-foot arched entries off Stirling Road, double French doors opening onto screened equestrian paddocks, and barn sliders on accessory structures that Broward County treats the same as the front door of a Weston townhouse.
Our crews are background-checked and uniformed. We measure every opening twice. We register both manufacturer warranty layers in writing before the truck leaves your driveway. And when something isn’t right, the Done Right Promise means we fix it without paperwork or argument. A live person answers our phone 24/7, because in a storm zone, a failed door seal at 11 p.m. isn’t a callback form problem. It’s a water intrusion problem. Call (863) 208-5172 and you’ll reach a person, not a menu.
Our Door Installation Services in Southwest Ranches
Entry & Swing Doors
Front entry doors in Southwest Ranches carry more wind load than most doors in Broward County, because the town is flat and open with large unobstructed lots. There’s nothing to slow a tropical storm before it hits your front facade. We install Miami-Dade NOA-rated swing doors with reinforced frames, multi-point locking hardware, and compression weather seals sized for your specific opening. On the custom estates near Flamingo Road and Dykes Road, we typically see entry openings four to six inches wider than anything in a builder catalog, which means custom fabrication and a frame that actually fits.
Double & French Doors
Double French doors are beautiful on a Southwest Ranches estate and fragile in a hurricane if they were never rated for one. The original units on many late-1980s and 1990s homes here were single-glazed with thin aluminum frames and no impact glazing. We replace them with fusion-welded, impact-rated systems that carry the paperwork to satisfy a Broward County inspector. On a custom estate off Stirling Road, our crew replaced a failing double French door after the original non-rated unit’s seal failed, leaving argon gas gone and fog between the panes. The oversized opening meant a custom-fabricated frame with impact-rated glazing and a flashed jamb, installed and inspected to meet HVHZ wind-load requirements.
Bifold & Folding Doors
Bifold and folding door systems are increasingly popular on the newer estate homes in Southwest Ranches, especially where a great room opens onto a pool or paddock view. These doors span twelve to twenty feet, and in HVHZ territory that means serious engineering. We quote manufacturer lines side by side on paper, including ES Windows and ECO Window Systems, so you see exactly what the hardware, glazing, and structural reinforcement actually cost. No surprise line items later.
Pivot Doors
A pivot door makes a strong statement on a Southwest Ranches entry, but it also introduces a single-point hinge system that has to handle hurricane wind loads without sagging or binding. We install pivot doors with reinforced headers and floor-mounted pivot hardware rated for the weight of a solid wood or steel slab. Every pivot install in Southwest Ranches gets both warranty layers registered in writing before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southwest Ranches
We’re an authorized installer for more than a dozen manufacturer lines, including CWS, ES Windows. That matters in Southwest Ranches because your door has to meet HVHZ code, and a manufacturer’s Florida Product Approval is only as good as the installation behind it. We stock common replacement hardware and weather seals for these brands locally, which means faster turnaround when a storm season check reveals a worn threshold or a failing sweep. If you have an existing CWS unit that’s binding, we can service it. If you’re replacing, we’ll quote side by side so you understand what you’re buying and why it costs what it costs.
Common Door Installation Problems We See in Southwest Ranches Homes
- Quoting only the main house and missing the barn. Broward County inspectors apply HVHZ product-approval requirements to large agricultural sliding or swinging barn doors on accessory structures, not just your front door. An out-of-area contractor who bids only the main house leaves you facing a failed inspection on the barn. We include every regulated opening in the quote the first time.
- Installing an off-the-shelf impact door into an oversized custom opening. Southwest Ranches estate homes rarely have standard-sized openings, so a catalog door leaves air and water gaps at the jamb. We measure first, then fabricate to fit.
- Using a non-HVHZ-rated product from a big-box store. If the door lacks a Miami-Dade Notice of Acceptance, it fails inspection and can void your insurance coverage after a storm. That’s a five-figure mistake disguised as a bargain.
- Ignoring the flat, open terrain wind load. Large lots with no windbreaks mean your doors take the full force of a tropical storm. The reinforcement, anchoring, and glazing have to be engineered for that reality, not for a protected cul-de-sac in Pembroke Pines.
Pricing for Door Installation in Southwest Ranches, FL
A standard entry door replacement in Southwest Ranches runs $2,800 to $7,500. A custom double French door with impact glazing typically lands between $6,000 and $14,000, depending on opening width and hardware. Pivot doors start around $5,500 and climb with slab material and size. Bifold and folding systems run $8,000 to $22,000 for wide spans. Barn door retrofits on equestrian outbuildings range from $6,500 to $18,000 because the agricultural opening usually needs a custom-fabricated HVHZ-rated frame. What changes your number is the actual millimeter measurements of your opening, the wind-load calculation for your exact lot exposure, and the hardware you choose. Call (863) 208-5172 for a free written estimate with line items.
We Also Serve Cities Near Southwest Ranches
We handle Door Installation across South Florida’s HVHZ corridor. Alongside Southwest Ranches, our crews work in Davie, Cooper City, Sunrise, and Weston. Each of those markets has its own code quirks and housing stock, and we quote them accordingly.
Serving Southwest Ranches, FL - Our Local Coverage Area
We’re based in the Southwest Ranches area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Southwest Ranches
Yes. Broward County inspectors apply the same High-Velocity Hurricane Zone product-approval requirements to large agricultural sliding or swinging barn doors on accessory structures as they do to your front entry. If the door does not carry a Miami-Dade Notice of Acceptance or Florida Product Approval, the permit fails. We include every regulated opening on your property in the quote the first time, so there’s no second inspection cycle. Call (863) 208-5172 and we’ll walk your property details with you before you spend a dollar.
Because Southwest Ranches has a 1.25-acre minimum lot zoning that produced custom-built estate homes, not tract housing. Openings are oversized, arched, or otherwise non-standard, and a catalog door leaves air and water gaps at the jamb. Beyond fit, most big-box door stock lacks the Miami-Dade NOA that Broward County requires in HVHZ territory. You’d pay twice: once for the door, again to replace it after inspection. A written quote from us includes the custom fabrication those openings demand.
If your doors were installed under permit with HVHZ-rated product approvals on file, your insurance claim has a documentation trail the adjuster can verify. If they weren’t, the carrier can argue the opening wasn’t code-compliant and reduce or deny the wind-damage claim. We register both manufacturer warranty layers in writing and keep your permit and inspection records straight. That paperwork is the difference between a check and a fight. Call (863) 208-5172 to get your doors documented properly.
A compliant quote includes the wind-load calculation for your exact lot exposure, the custom-fabricated frame dimensions for your oversized opening, Miami-Dade NOA product documentation for every door and every outbuilding opening, permit fees, and the inspection pass. A cheap quote typically covers the door slab only and ignores the barn door entirely. Then the inspector fails the accessory structure and you’re negotiating change orders. We write line items. You see exactly what compliance costs, not what the other bid left off.
Most non-rated double French doors from the late 1980s and 1990s cannot be retrofitted to meet HVHZ standards. You can’t add impact glazing to a frame that wasn’t engineered for it, and the existing fastener schedule and jamb reinforcement won’t carry the wind load. Full replacement with a custom-fabricated, fusion-welded impact system is almost always the only code-compliant path. Call (863) 208-5172 and we’ll inspect what you have and tell you straight whether it’s salvageable or not.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Southwest Ranches with HVHZ-compliant door installation and the Keystone Standard on every job.
Call (863) 208-5172 for a free, written door installation estimate in Southwest Ranches. A live person answers, and we’ll give you the real number for your exact opening.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.