Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Southwest Ranches, FL | TruePane Windows & Doors
We service and repair CGI windows and doors across Southwest Ranches, from the estate homes off Stirling Road to the equestrian properties along Hancock and Shotgun. We’re an independent CGI service provider, not a manufacturer affiliate, which means we diagnose what’s actually wrong instead of steering you toward a full replacement. The biggest difference in Southwest Ranches is simple: almost nothing here is a standard size, and outbuildings carry the same hurricane code as the main house. Call (863) 208-5172 when a window binds or a door won’t seal, and we’ll send a tech who knows this town’s housing stock cold.
Why Southwest Ranches Residents Choose Us for CGI Service
Most window companies in Broward County cut their teeth on tract-home subdivisions where every opening matches a spec sheet. Southwest Ranches doesn’t work that way. The 1.25-acre minimum lot zoning produced custom estate homes with oversized architectural openings, grand double-door entries, and separate barn structures, and none of it matches off-the-shelf dimensions. We’ve measured and serviced CGI products on those lots for years, and our techs know the factory’s exact hinge, roller, and corner-seal quirks without needing a call to CGI’s Miami plant.
Dale Kessler, our owner, grew up off Orange Drive near the old Davie Arena and learned the trade formally at McFatter Technical College before spending twenty-six years setting and sealing windows across Broward County. He’s the person neighbors call when a previous install fails its first serious storm. Our techs are background-checked and uniformed, they measure every opening twice, and they register both warranty layers in writing before the truck leaves the driveway. We treat your CGI windows the way we’d treat them on our own mothers’ houses.
Common CGI Windows & Doors Problems We Solve in Southwest Ranches
Here’s what we see most often on CGI products in this town, and why the local conditions make each one worse:
- Estate Series casement operators stripping their worm gears. On those wide custom openings facing the open paddocks, homeowners crank the operator past the stop without realizing it, and the wind-driven grit from the equestrian properties chews the gear teeth down. We replace the operator with the OEM part and set the limiter so it can’t happen again.
- Classic Series single-hung balances losing tension on west-facing walls. The afternoon sun here is relentless, and on those deep stucco returns common to 1.25-acre lot homes, the jamb liner heats up enough to fatigue the balance spring. The sash starts dropping or won’t stay up. We restring or replace the balance and check the liner for heat warping.
- Sentinel Series impact glazing fogging at the edge seal. When the butyl bead gets overheated by direct sun on frames set into deep stucco returns, the seal lets go and moisture works its way between the panes. You can’t wipe it off because it’s inside the glass. We replace the insulated glass unit and reseal the frame properly.
- Targa Series sliding patio door rollers cracking their nylon tires. The fine sand blown across open paddocks and unbroken lots works its way into the track, the rollers grind against it, and the tires crack. The door starts dragging and eventually won’t move. We replace the rollers with OEM CGI hardware and clean the track so it rolls smooth again.
- Barn door systems on accessory structures failing inspection. This is the one that surprises people. We’ll cover it in detail below, but the short version is that Broward County treats those big agricultural sliding doors as regulated openings, and a generic track won’t pass.
CGI Service in Southwest Ranches: What Local Conditions Mean for Your Equipment
Southwest Ranches is Broward County’s only incorporated equestrian community, and that creates a code situation you won’t find in Weston or Pembroke Pines. Many property owners run CGI impact windows on the main residence, but the barn doors on accessory structures are regulated openings under HVHZ. Broward County inspectors treat them the same as your front entry door. We’ve had to replace entire CGI custom barn slider packages after an inspector flagged a non-NOA generic track that an out-of-area contractor installed to save a few hundred dollars. The owner thought the barn was just for horses, so the code didn’t apply. The inspector disagreed, and the failed inspection cost far more than doing it right the first time. If you have any outbuilding with a door larger than a standard man door, plan for it to carry an NOA or Florida Product Approval. We’ll check the whole property, not just the house.
CGI Models & Products We Service in Southwest Ranches
We service all four current CGI lines and the older units still in place from the 1990s and 2000s builds: Classic Series, Estate Series, Sentinel Series, and Targa Series. That includes single-hungs, casements, picture windows, sliding patio doors, and the custom impact entry doors common on Southwest Ranches estates. For hardware like rollers, hinges, and balances, we install OEM CGI parts because the factory’s J-channels and corner keys have tolerances that aftermarket generics don’t match. For non-structural trim, sweep, and weather-strip, we use Miami-Dade-approved equivalents and tell you when a whole frame replacement is cheaper than chasing a cracked weld on a 1990s Targa door. We keep the most common OEM hardware on the truck for faster turnaround on callbacks.
CGI Service Pricing in Southwest Ranches
Service pricing depends on the part and the series, but as a reference: roller replacement on a Targa sliding door typically runs $185 to $340 per panel including labor. Balance replacement for a Classic Series single-hung is generally $160 to $290 per sash. Casement operator replacement on an Estate Series unit falls between $240 and $420 depending on the size. Edge seal repair on Sentinel Series impact glass is usually $175 to $375 per pane when it’s a straightforward IGU replacement. A barn slider that failed inspection and needs a full NOA-compliant rebuild is a different scale of job, and we’ll quote it line by line on paper. Every estimate is free, and every quote is a fixed number, not an opening bid. Call (863) 208-5172 to schedule yours.
Serving Southwest Ranches, FL - Our Local Coverage Area
We’re based in the Southwest Ranches area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Southwest Ranches
Yes. Broward County inspectors treat any door or window on an accessory structure as a regulated opening subject to HVHZ product-approval requirements, regardless of whether the building houses horses, hay, or equipment. A generic track or non-approved window will fail inspection. Call (863) 208-5172 and we’ll check every opening on your property before the inspector does.
In most cases, yes. The insulated glass unit can be replaced without removing the entire frame, as long as the frame itself is sound and the original glazing bead is intact. We match the replacement IGU to the factory spec and reseal it so the same sun exposure on your west-facing stucco return doesn’t fog it again.
That’s almost always thermal expansion in the jamb liner. On west-facing walls in Southwest Ranches, the direct afternoon sun heats the frame enough that the vinyl liner swells and pinches the sash. We can adjust or replace the liner and often the balance while we’re in there. It’s a specific fix, not a mystery.
Repair is usually the right call if the frame is square and the glass is still sealed. Cracked nylon tires from paddock grit are a common failure, and OEM roller replacement is a fraction of the cost of a new Targa door, which runs in the thousands on a custom Southwest Ranches opening. If the frame itself is compromised or the track is warped, we’ll tell you plainly and quote both paths.
Sometimes. CGI has shifted their paint and finish palette over the years, and certain older bronze and sand tones are no longer in production. We work with a local finisher who can color-match the existing panel to tight tolerance, and we’ll show you the match before we install it. It won’t be invisible, but it will be close enough that nobody notices unless you point it out.
Service Areas Near Southwest Ranches
We provide CGI sales & service across Broward County. In addition to Southwest Ranches service area coverage, our techs regularly work in CGI service in Davie, CGI service in Cooper City, Weston, Sunrise, and Pembroke Pines. The drive is short, and we know the housing stock in each of these towns the same way we know Southwest Ranches.
Book Your CGI Service in Southwest Ranches Today
When a CGI window binds or a Targa door drags, call (863) 208-5172. A live person answers, we schedule a tech who knows your series and your street, and we show up with the OEM parts on the truck. Free estimates, fixed pricing, and a repair done right the first visit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Southwest Ranches since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.