Door Installation in Weston - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Weston

Door installation in Weston usually runs between $1,800 and $6,500 depending on whether you’re replacing a builder-grade entry door, adding French doors to a patio, or upgrading to impact-rated glass that meets current Broward County wind code. Most standard replacements in Weston’s planned villages take one to two days once the HOA architectural review clears. If you need a straight answer on cost and timeline for your specific home, call TruePane Windows & Doors at (863) 208-5172 and a live person will talk you through it.

Call (863) 208-5172

We work in Weston every week. Our crews know the village HOAs, the permit sequence, and the difference between a door that just needs new weatherstripping and one that should come out entirely. You won’t spend time explaining your subdivision’s rules to someone who’s never heard of it.

Why TruePane Windows & Doors Is Weston’s Preferred Door Installation Company

TruePane Windows & Doors was founded in 2008 by Dale Kessler, a second-generation glazier who built the company on a rule that still governs every install: if the pane is not true, the job is not done. We’ve served South Florida homeowners since 2008 through Dale’s family trade, and Weston customers call us because we show up when we say, measure every opening twice, and register both manufacturer warranty layers in writing before the truck leaves the driveway.

Weston is a particular kind of market. Homes here were built in a narrow window between the early 1990s and mid-2000s, and nearly all of them still carry their original builder-grade doors and hardware. That means the work we do usually involves HOA architectural approval, county permits, and a homeowner who wants to know exactly what the final door will look like against their existing trim. We’re comfortable with that. Dale’s rule applies as much to the paperwork as to the install.

Every technician who works in Weston is background-checked and uniformed. We quote manufacturer lines side by side on paper, including Simonton, PGT, and CGI, so you see what you’re buying before you commit. And we back the workmanship for 90 days under our Done Right Promise. If something’s not right, we make it right with no arguing.

Our Door Installation Services in Weston

Entry & Swing Doors

A new entry door in Weston typically runs $2,200 to $5,800 installed, with impact-rated units at the higher end. Most homes in the Bonaventure and Windmill Ranch areas still have the original steel or fiberglass slab the builder put in. Those doors are usually out of square by now, and the bottom sweep lets afternoon Everglades humidity into the foyer. We replace the entire frame when needed, not just the slab, so the jamb is true and the weatherstripping seals tight.

Double & French Doors

French door installations in Weston run $3,500 to $8,500 for a standard opening, depending on impact rating and finish. These are common in the patio-facing rear elevations across Savanna and The Falls. The old units tend to bind in July because the concrete slab has settled and the panel hinges are carrying weight they were never designed for. We reshim the frame before setting new panels, and we check the sill slope against Weston’s daily summer storms, which drop rain fast and expose any low side immediately.

Bifold & Folding Doors

Bifold door systems are gaining ground in Weston’s newer and remodeled homes, especially where owners want a wide opening to the pool deck. Expect $6,000 to $14,000 installed for a quality four-panel folding system in this market. These doors are heavy, and the track and floor roller systems need precise leveling. Weston’s concrete-block construction handles the weight well, but only if the header is sized correctly. Our Door Installation team specs the header before any panel goes in.

Pivot Doors

Pivot doors are the one modern upgrade that Weston HOAs push back on most often. A true pivot door rarely matches builder-profile dimensions, which is why we show you the architectural review risk before you spend the money. Budget $4,500 to $9,000 for a well-built pivot door installed. Some villages in the Sector 3 and Sector 4 communities will approve a pivot with a matching finish, but you want that answer in writing first. We prepare the submission for you.

Trusted Brands We Service in Weston

We are an authorized installer for more than a dozen manufacturer lines, and in Weston we most often quote, PGT, and CGI for impact-rated door upgrades. Simonton and CGI both carry product approvals recognized in Broward County, and PGT’s impact door lines have a strong track record in the village HOAs. We quote these side by side on paper with the warranty durations stated, so you’re comparing real numbers, not sales language. Parts and hardware for these brands are readily available to our South Florida crews, which keeps turnaround short for Weston homeowners.

Common Door Installation Problems We See in Weston Homes

• HOA stop-work orders on started jobs. A contractor skips the village architectural review, gets the county permit, starts work, and then the HOA demands the door come out. We’ve seen this happen in Savannah and Sector 4. The fix is always the same: resubmit the application with matching profile and finish, then redo the job at the homeowner’s expense. We file the HOA approval before pulling the permit.
• Reusing an original jamb under a heavier impact door. Impact-rated doors weigh more than builder-grade units. If the original jamb isn’t reinforced, the door sags within the first wet season and the sill seal opens to Weston’s 85-90% summer humidity. We check jamb condition before reuse.
• Seal-failed insulated glass in original doors. Many Weston homes have upper-end builder doors with insulated glass that has simply fogged after 20-plus years of Everglades-adjacent humidity. The frame is fine, but the glass is shot. We can often replace just the glass unit and keep the door.
• Mismatched door profile dimensions. The HOA wants the new door to match the original builder profile. A replacement that’s off by half an inch triggers a violation notice even after the county permit is closed. We measure against the original dimensions and specify to the HOA’s requirements.

Pricing for Door Installation in Weston, FL

Here are the ranges we see most often in Weston:

• Standard entry door replacement: $2,200-$5,800
• Impact-rated single entry door: $3,500-$7,200
• Double French door replacement: $3,500-$8,500
• Impact-rated French door set: $5,500-$10,500
• Bifold or folding door system: $6,000-$14,000
• Pivot door with hardware: $4,500-$9,000
• Sliding patio door replacement: $2,800-$7,500
• Impact-rated sliding patio door: $4,800-$9,800

What moves the number: whether the HOA requires a specific finish, whether the opening is out of square and needs frame work, and whether you’re going impact-rated or standard. Weston’s CBS construction keeps most openings workable, but slab settlement in the 1990s villages sometimes requires reshimming, which adds a few hundred dollars. Call (863) 208-5172 for an exact quote. Estimates are free, and we put the numbers on paper before you agree to anything.

Here’s the part that matters for Weston specifically. The village HOAs in this city require architectural review board approval for any exterior door replacement before the county permit is pulled. Many mandate matching the original builder color palette and profile dimensions. If that HOA step is skipped, the homeowner can be ordered to remove and redo the completed installation, and that’s a cost no one will cover. It is the single most common and most expensive mistake we see from out-of-area contractors working Weston.

We replaced a corroded, seal-failed aluminum sliding door in the Sector 4 village with a Ply Gem impact-rated sliding unit, but only after our crew submitted the HOA’s architectural review application matching the original builder bronze finish. The old door’s weatherstripping had rotted from daily Everglades-driven humidity, and the new insulated glass unit with argon fill restored a clean U-factor for the homeowner’s wind-mitigation inspection. That job took four weeks from quote to completion, and most of it was waiting on the HOA board’s review cycle. We knew to build that time in.

The Weston HOA and Wind-Code Reality

Weston was master-planned and built almost entirely between the early 1990s and the mid-2000s, after Hurricane Andrew but before Florida’s most current impact-code cycles. That leaves a city-wide housing stock of original doors and windows that met post-Andrew standards but often lack current Miami-Dade or Florida Product Approval impact certification. Every door upgrade in Weston is simultaneously a code-compliance repair and an insurance premium reduction opportunity, because Broward County carriers have tightened wind-mitigation requirements and a certified wind mitigation inspection after impact-door installation directly lowers premiums in this high-value home market. If you’re replacing a door anyway, going impact-rated usually pays for itself faster in Weston than in older Broward neighborhoods.

Most Weston homes from that era are CBS, concrete block and stucco, with builder-standard aluminum frames and sliding doors. It’s a remarkably uniform housing stock. That uniformity is useful: we know what we’re going to find behind the trim before we open the wall. But it also means the HOAs have long-established expectations for what a replacement door should look like, and they enforce them.

We Also Serve Cities Near Weston

TruePane Windows & Doors works throughout western Broward County. In addition to Weston, our crews regularly handle door installations in Davie, Cooper City, Southwest Ranches, and Sunrise. If you’re in one of those communities and dealing with the same builder-grade door and HOA approval questions, call us at (863) 208-5172. The same team handles that whole western corridor, and we know the local permit offices and architectural review boards.

FAQs - Door Installation in Weston