Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Dania Beach
Window replacement in Dania Beach typically runs $850-$2,400 per opening for HVHZ-compliant impact units, installed. Most full-frame jobs in the older 1940s-1960s blocks take one to two days per window once materials arrive. If you’re in Dania Beach and the salt air has pitted your frames or the airport noise keeps you up, call (863) 208-5172 for a free estimate. We measure twice, quote on paper, and register both warranty layers before the truck leaves your driveway.
We work the neighborhoods off US-1, the blocks west of the beach, and the CBS cottages near Sheridan Street every week. Our crews know which openings still carry original jalousie windows and which HOA boards require specific NOA numbers before approving a permit. That local knowledge means fewer surprises on your bill and a clean inspection the first time.
Why TruePane Windows & Doors Is Dania Beach’s Preferred Window Replacement Company
Dania Beach is not like newer Broward suburbs. The housing stock here was built before hurricane code existed, and the Atlantic sits close enough that marine air works on every extrusion, sill, and weep system. Our founder, Dale Kessler, started TruePane Windows & Doors in 2008 on a rule he keeps on the whiteboard: if the pane is not true, the job is not done. That standard governs every install our crews run in Dania Beach.
We hold authorization from more than a dozen manufacturer lines, including PGT, CGI, and Andersen, and we quote those lines side by side on paper so you see exactly what you’re paying for. Our technicians are background-checked and uniformed, and they measure every opening twice. The Keystone Standard means both manufacturer warranty layers get registered in writing, with durations stated, before we leave. The Done Right Promise sits on top of that: if something is not right, we fix it. No paperwork fights, no fine print that covers neither.
When a homeowner on a salt-exposed block west of the beach calls about a fogged seal, we don’t sell them a glazing patch that fails in three years. We explain why the aluminum extrusions pitted, what marine-grade coating the replacement needs, and what the coastal-spec unit costs versus the inland version. That’s the conversation our Dania Beach customers say they couldn’t get from the franchise bids.
Our Window Replacement Services in Dania Beach
Every Dania Beach block has its own combination of age, salt exposure, and airport noise. These are the four replacement paths we run most often, and how each one lines up with conditions here. For the full scope of what we handle, see our Window Replacement team’s service hub.
Full Frame Replacement
Most 1940s-1960s homes in Dania Beach still carry the original window openings: jalousie louvers, single-pane aluminum frames, and hollow-core door casings that were never designed for HVHZ wind loads. Full frame replacement removes everything down to the rough opening, then sets a new NOA-certified impact unit with fusion-welded frames and marine-grade coated extrusions. This is the standard path for any permitted renovation or property sale in older Dania Beach blocks, because Broward County’s High-Velocity Hurricane Zone designation requires compliant products on any opening being changed out.
A typical full frame replacement in a 1950s CBS cottage off Sheridan Street runs $1,600-$2,400 per opening, including disposal of the old jalousie assembly and re-trimming the interior. We pull permits, schedule the inspection, and stand behind the install.
Insert Window Replacement
If the existing frame is square, structurally sound, and not corroded through, an insert window fits a new operating unit inside the old frame. This saves labor and preserves interior trim, which matters on the original wood-cased openings we see in Dania Beach’s older frame cottages. Inserts run $850-$1,400 per opening for impact-rated units, depending on size and glass package.
Salt exposure decides whether an insert is even viable on your block. West of US-1 under the flight path, frames tend to hold up better than oceanfront, where aluminum pitting eats the jamb and an insert would sit in a compromised pocket. We check before we quote, and we’ll tell you straight if a full frame is the only honest fix.
Storm Window Replacement
Storm windows in Dania Beach serve a double duty: wind pressure and impact resistance. Broward County code requires large-missile tested glazing for any new or replacement opening, and homeowner insurance carriers increasingly demand NOA documentation before renewing policies on older stock. A storm window replacement in Dania Beach typically runs $950-$1,700 per window for a single hung, single impact unit, and $1,400-$2,100 for a sliding window.
We register the NOA with your municipality and provide the paperwork your insurer wants, including product approval numbers and installation photos. That documentation matters in Dania Beach’s mandatory compliance climate, where a permit without NOA records stalls a sale.
Energy-Efficient Upgrade
South-facing windows on Dania Beach homes take direct sun eleven months a year, and the salt-laden humidity drives cooling loads from May through October. Low-E dual-pane glass with argon fill reduces solar heat gain and cuts condensation on the interior surface, which is a real issue in older concrete block homes that stay damp. Energy-efficient replacement windows in Dania Beach run $1,000-$1,900 per opening for impact-rated low-E units, and we quote the exact glass package on paper.
For homes under the Fort Lauderdale-Hollywood International departure corridor, the energy conversation is not just about heat. It’s about glazing thickness and STC ratings. We’ll get to that below.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dania Beach
We install, service, and register warranties for PGT, CGI, Simonton, and more than a dozen other manufacturer lines. What that means for you in Dania Beach: when we quote, we put two or three manufacturer options side by side with line-item pricing, and you see the frame material, glass package, and NOA number for each. No mystery lead times. No substitution games. We carry local inventory for common Dania Beach sizes, so a replacement sash on a PGT or CGI unit doesn’t leave a hole in your wall for six weeks while the factory catches up.
Common Window Replacement Problems We See in Dania Beach Homes
- Salt pitting on aluminum extrusions. Oceanfront and near-ocean blocks get marine air all year, and uncoated aluminum frames show pitting and white corrosion blooms within 7-10 years. Once the pitting reaches the weep system, water stops draining and the seal fails from the inside out.
- Original jalousie windows in 1940s-1960s homes. These louvered glass openings were never sealed against wind-driven rain, and the hardware is now seized, corroded, or missing parts. They cannot be repaired into compliance. The entire opening must come out and a new impact unit must go in.
- Airport noise intrusion along the south departure corridor. Blocks west of US-1 sit beneath the primary takeoff path, and standard impact glass doesn’t stop low-frequency jet rumble. Homeowners who upgrade for storm code without specifying STC-rated glazing often call us back within a year, unhappy with the noise level that’s still coming through.
- Fogged seals on impact windows that were already replaced once. Salt air and thermal cycling stress the edge seals on dual-pane units. When the desiccant inside the spacer bar saturates, the glass fogs permanently. We see this on units installed less than a decade ago by contractors who used inland-spec frames without marine-grade coatings.
Pricing for Window Replacement in Dania Beach, FL
Here’s what we quote in Dania Beach, today. A single-hung impact insert window typically costs $850-$1,400 installed. A full frame replacement on a 1950s jalousie opening runs $1,600-$2,400 per window. Storm-rated sliding windows run $1,400-$2,100, and a low-E energy upgrade on a standard double-hung opening lands between $1,000 and $1,900. Coastal-spec units with marine-grade coatings and heavier glazing run 15%-25% more than the inland version of the same size. That gap pays for itself here: the inland-spec frame will be pitted and fogged before the coastal unit has finished its first decade.
Every quote is written, line-item, and fixed before we start. No change orders, no surprise line items. Call (863) 208-5172 and we’ll measure your openings, check the existing frames for corrosion, and hand you a number you can hold us to.
We Also Serve Cities Near Dania Beach
If you’re in Davie, Cooper City, Southwest Ranches, or Sunrise, our crews work those neighborhoods too. For everything specific to your area, see more on Window Replacement in Dania Beach and its nearby communities. Same Keystone Standard, same Done Right Promise.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Dania Beach
Dania Beach sits inside Broward County’s High-Velocity Hurricane Zone, which requires large-missile impact-tested products bearing a Notice of Acceptance from the Florida Building Commission on any replacement opening. Standard units sold in non-HVHZ areas don’t carry the NOA number and won’t pass a Dania Beach permit inspection. Every full frame and insert window we install in Dania Beach is NOA listed, and we register the product approval with your permit so the inspection clears and your insurer has what they need. Call (863) 208-5172 for a free written estimate.
The most common failure is salt pitting on uncoated aluminum extrusions, followed by seal failure once the weep system clogs. On oceanfront and near-ocean blocks, windows installed less than ten years ago show white corrosion blooms, especially on the sill track and interior corners. We specify marine-grade coated extrusions and stainless hardware in those blocks as a standard, not an upsell, because a 15-year inland frame is a 7-year coastal frame. Call for an inspection and we’ll show you exactly where your frames stand.
We specify impact units with elevated STC ratings of 45 or higher for homes in the south departure corridor west of US-1. The heavier laminated glass and wider air gap between panes cuts low-frequency jet rumble that standard impact glass lets through. It adds modest cost, but a storm-code-compliant window that lets airplane roar through is a wasted install, and we’d rather you understand that before you buy. Bring us your address and we’ll tell you if you’re under the corridor and what glass package we recommend.
Coastal-spec windows cost 15%-25% more because of the marine-grade coatings on the aluminum extrusions, stainless hardware, and heavier glazing required to hold pressure cycles without corroding. That gap exists because the inland version will fail faster in Dania Beach’s salt air: pitted frames, clogged weeps, and fogged seals inside a decade. Paying the marine-grade difference now means you don’t pay for another full replacement before your mortgage is done. Call (863) 208-5172 and we’ll quote both specs so you can see the numbers side by side.
In most Dania Beach impact windows, the glass unit and the frame are part of one sealed, NOA-certified assembly, and replacing just the glass voids the impact rating and the manufacturer warranty. If the frame is still square and the hardware is sound, we can sometimes replace the sash unit from the same manufacturer, keeping the NOA number and the warranty intact. We can usually tell you over the phone whether your unit qualifies, but we’ll confirm it in person before we order. That’s part of the free estimate at (863) 208-5172.
Window replacement in Dania Beach is not a generic job. Salt air decides the frame material, the airport decides the glazing, and the housing stock decides the scope. We’ve been doing this work long enough to know which spec belongs on which block, and we’ll put it in writing before we start. If you’re ready to replace your windows once and be done with it, call TruePane Windows & Doors at (863) 208-5172 for a free, fixed estimate. We’ll measure, quote, and register your warranties before the truck leaves the driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Dania Beach with The Keystone Standard on every install.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.