Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Dania Beach
Sliding patio door replacement in Dania Beach typically runs $2,800-$6,500 for a standard 6-foot opening, and $4,200-$9,800 for a heavy-duty impact-rated unit with marine-grade finish and acoustic glazing. Most jobs take one full day for removal and set, with a follow-up for trim and final adjustment. If you’re east of US-1 or under the airport departure path, the spec changes fast, and that’s exactly what we’ll talk through before you spend a nickel. Call (863) 208-5172 and Dale Kessler’s crew will give you a straight answer on what your opening actually needs.

We’ve worked Dania Beach blocks from NE 2nd Street to the neighborhoods off Stirling Road long enough to know that every quote here starts with two questions: how close to salt air, and how close to the flight path. If you’re replacing a sliding door in a 1950s CBS cottage or a 1960s ranch near the Intracoastal, the answer to those two questions decides everything about the metal, the glass, and the hardware. TruePane has been doing this work in Broward County since 2008, and our Sliding & Patio Doors crew treats Dania Beach as its own animal, not a copy of what works in Davie or Sunrise.
Why TruePane Windows & Doors Is Dania Beach’s Preferred Sliding & Patio Doors Company
Dania Beach homeowners call us because the door we set ten years ago still slides like it did the week it was installed. That’s not luck. It’s what happens when the person quoting your job understands that a sliding door two blocks off the ocean in Dania Beach is not the same door you’d set in Cooper City. Salt air eats aluminum here. The airport corridor punishes single-pane glass. The old jalousie-style openings that show up all over this city cannot be patched. We quote for the conditions, not the brochure.
Every Dania Beach job is covered by our Done Right Promise. If something is not right, we make it right. No paperwork fights. No fine print that covers neither. That promise sits on top of The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. You get side-by-side quotes on paper from authorized lines including PGT, CGI, and ES Windows, so you see exactly what you’re buying and what each layer covers. Background-checked, uniformed technicians measure every opening twice. A live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree. Not a call center. A person who knows Dania Beach.
Our Sliding & Patio Doors Services in Dania Beach
Patio Sliding Doors
A 6-foot sliding patio door in Dania Beach runs $2,800-$6,500 depending on impact rating, frame finish, and glazing package. The homes here skew toward older concrete block and frame construction, which means we’re often pulling out original single-pane sliders that were never rated for the wind loads Dania Beach sees. We set new HVHZ-compliant units with stainless steel roller hardware and marine-grade frames. Not because it’s an upgrade. Because it’s the floor.

Panoramic Sliding Systems
For wider openings and wall-to-wall glass, panoramic sliding systems in Dania Beach start around $6,000 and run to $14,000 or more depending on panel count and finish. These are heavy multi-track systems, and in Dania Beach’s salt air the track material matters more than the glass. We specify stainless or marine-anodized aluminum tracks with sealed bearing rollers, not the powder-coated hardware that pits within seven years two blocks off the ocean. Dale Kessler has set enough of these along the Intracoastal to know which manufacturers hold up and which ones start binding by year eight.

Heavy-Duty Sliding Doors
Heavy-duty sliding doors in Dania Beach are the default spec, not the upgrade. The combination of HVHZ missile-impact requirements, salt corrosion, and the airport noise corridor means a lightweight inland-spec door simply will not do the job. These units run $4,200-$9,800 for a standard opening, and more for oversized or multi-panel configurations. We recommend laminated low-E glass with an elevated STC 45+ rating for any home under the Fort Lauderdale-Hollywood departure path. It’s a dual requirement: the glass has to stop a 2×4 at 50 feet per second and knock down jet blast noise. Dania Beach is one of the only cities in Broward where that conversation is standard.

Pocket & Barn Doors
Pocket and barn door installations in Dania Beach homes often start with a wall condition that hasn’t been touched since the Truman administration. The 1940s and 1950s cottages here have framing that predates modern pocket door kits, so we expect to reframe, re-level, and often repair termite or moisture damage before we set a single track. A standard pocket door replacement runs $1,800-$3,200. Barn door hardware on masonry or CBS walls runs $900-$1,800 for installation. If it’s going on an exterior wall in Dania Beach, the hardware needs to be hot-dip galvanized or stainless. Salt air will eat decorative black powder coat within a few seasons, and we don’t want to be back for the same door twice.

Screen Door Installation
Screen door installation in Dania Beach is a small job we treat with the same care as a panoramic glass wall. A quality sliding screen door runs $350-$850 installed, and in Dania Beach’s salt air you want an aluminum frame with stainless mesh, not the cheap nylon screen that corrodes and tears within two years. We set screen doors that slide clean, latch square, and hold up to the same coastal air that kills everything else on the house.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dania Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Dania Beach specifically we quote PGT, CGI, and ES Windows more than any others. PGT’s impact-rated sliding doors carry the NOA certifications Broward County inspectors expect on every permitted job. CGI’s laminated glass packages hit the STC ratings that matter under the airport corridor. ES Windows offers marine-grade anodized finishes that hold up where raw aluminum pitts. We stock common parts and hardware for these lines in our South Florida shop, so a stuck roller or worn track on a Dania Beach door doesn’t have to wait on a factory shipment from Georgia. Dale Kessler believes a door should be fixable, not disposable. We service what we sell and a lot of what other people sold, too.
Common Sliding & Patio Doors Problems We See in Dania Beach Homes
- Salt-corroded sills and weep systems: Three blocks off the ocean, aluminum sliding door sills and weep channels pit and seize within 7-10 years without marine-grade coating. The door stops draining, water pools at the track, and the frame rots from the inside out. We see it weekly in Dania Beach and almost never in Davie.
- Fogged double panes on 10-year-old doors: Dania Beach’s salt-laden air attacks the sealant between panes faster than inland air. A fogged seal means the insulating glass unit has failed. On an impact-rated Dania Beach door, that IGU has to meet HVHZ specs, so it’s not a $200 reglaze. We carry replacement IGUs for the major lines we service and register the warranty in writing before we leave.
- Original jalousie-style sliding glass openings that cannot be repaired: The 1940s-1960s CBS and frame homes across Dania Beach still hold original jalousie-style sliding glass that fails every Broward County inspection. Code requires full removal and replacement with NOA-certified impact units. We handle the permit, the removal, and the new door so you don’t get a stop-work order on a property sale.
- Bind-and-stick tracks from frame settle: Older Dania Beach cottages settle, and the concrete slab moves. A sliding door that was square in 1965 is not square today. When a homeowner tells us the door “used to slide fine,” we check the header, the sill, and the slab before we touch the rollers. Setting a new door into an out-of-true opening guarantees a callback. Dale Kessler’s rule is simple: if the pane is not true, the job is not done.
Pricing for Sliding & Patio Doors in Dania Beach, FL
Dania Beach pricing splits into two tiers: coastal-spec and inland-spec, and the gap is real. A standard 6-foot sliding patio door with impact glazing and a marine-grade anodized finish runs $4,800-$7,200 in Dania Beach’s near-ocean and airport-corridor blocks. The same nominal size with a basic powder coat and standard impact glass runs $2,800-$4,500. That $2,500-$3,000 difference is not padding. It’s the cost of hardware and glazing that survives salt air and jet blast. A cheap-spec door set two blocks off NE 2nd Street will be pitted and binding within seven to ten years, and the replacement will cost more than the upgrade would have. We give free estimates on every job. Call (863) 208-5172 and we’ll quote both specs on paper so you can see the math yourself. Seniors and veterans get a permanent 5% discount, and any repair over $250 qualifies for $50 off.
We Also Serve Cities Near Dania Beach
TruePane runs crews into Davie, Cooper City, Southwest Ranches, and Sunrise every week. The coastal-spec conversation differs in each town, but the standard is the same: if the pane is not true, the job is not done. For homeowners researching Dania Beach sliding door work, we cover every neighborhood from the oceanfront blocks to the homes off Stirling Road and everything in between. One call to (863) 208-5172 gets you a straight answer wherever you are in the area.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Dania Beach
Salt-laden Atlantic air corrodes standard aluminum sliding door extrusions, rollers, and sills within 7-10 years in Dania Beach’s near-ocean blocks, while the same hardware lasts 20+ years in Davie. The fix is a marine-grade anodized finish or stainless steel hardware, not a heavier coat of powder. If you’re east of US-1 or within a few blocks of the Intracoastal, we quote marine-spec by default and explain exactly what it adds to the price. Call (863) 208-5172 and we’ll show you both specs on paper.
No. Any permitted renovation or property sale in Dania Beach triggers full replacement of jalousie-style openings with NOA-certified impact units under Broward County’s High-Velocity Hurricane Zone code. The old aluminum frames cannot be reglazed to pass inspection. TruePane handles the full removal, the permit, and the new HVHZ-compliant sliding door so the job passes the first time. Call (863) 208-5172 for a free estimate on your specific opening.
Any sliding patio door in Dania Beach’s airport-noise corridor must meet both HVHZ missile-impact standards and an elevated acoustic rating of STC 45 or higher using laminated glass. That’s a dual code-and-comfort requirement unique to Dania Beach among Broward County cities. We quote PGT and CGI laminated low-E packages that satisfy both, and we’ll show you the documented STC and NOA ratings on paper before you commit.
Salt air accelerates seal failure on double-pane insulating glass units, so Dania Beach doors typically fog five to ten years sooner than inland units. When that seal goes, the thermal and impact performance is gone, and the IGU has to be replaced, not cleaned. TruePane carries replacement IGUs for the major manufacturers we install and registers the warranty in writing before we leave the driveway. Call (863) 208-5172 for a free inspection and quote.
Expect to pay $2,500-$3,500 more for a marine-grade anodized frame, stainless steel hardware, and elevated-STC laminated glass on a 6-foot sliding door compared to a standard inland-spec unit. That premium is the cost difference between a door that lasts 15-20 years two blocks off the ocean and one that starts pitting and binding within seven. We price both specs side by side so you can make the call with full knowledge, not a sales pitch.
Written by Dale Kessler, Owner at TruePane Windows & Doors. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After