Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterWhy Davie Homeowners Choose CGI Windows & Doors
We provide independent CGI windows and doors repair, service, and replacement throughout CGI Windows & Doors in Davie, FL, from legacy Windows 4000 series dating to the 1990s through current Estate and Targa impact lines. Our technicians work on more CGI products across South Florida than nearly any independent shop, and we have rebuilt CGI corner joints, balances, and impact glazing for Davie homeowners since 2008, backed by our Done Right Promise. As an independent CGI service provider, we are not affiliated with or authorized by CGI, which means we answer to you, not a manufacturer’s sales quota. If the pane is not true, the job is not done. Call (863) 208-5172 for a free estimate.
Why Trust TruePane Windows & Doors for Your CGI Windows & Doors?
Most window companies in Broward County can order a CGI window. Few can take one apart, diagnose why it failed, and fix it without voiding the warranty. Our technicians have spent years working inside CGI frames, and we understand the difference between a seal failure caused by Florida humidity and one caused by a bad install. Dale Kessler grew up off Orange Drive near the old Davie Arena, trained at McFatter Technical College, and has been measuring, setting, and sealing windows and doors in Broward County for twenty-six years. He has seen what salt air and high humidity do to an aluminum frame after two decades, and he has taught our crew to look for it before it becomes a customer’s problem. When we service a CGI window in Davie, we register both warranty layers in writing before the truck leaves your driveway. That is our Keystone Standard, and we do not argue about it later.
We are background-checked and uniformed, and we measure every opening twice. We quote manufacturer lines side by side on paper so you see exactly what you are buying. We are an authorized installer for more than a dozen brands, including Andersen, Pella, Marvin, PGT, and CGI, but we never push a product we would not put on Dale’s own house, and we back every Window Installation services project with that same standard. Our loyalty is to the homeowner, not a single factory. That is why a live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree. A person.
Common CGI Windows & Doors Problems We Fix in Davie
- Fogging between panes in legacy CGI Windows 4000 insulated glass units. Seal failure is the usual cause, and in Davie the humidity accelerates it. Once the desiccant inside the spacer bar is saturated, condensation forms between the glass and cannot be wiped off. We replace the insulated glass unit and rebuild the seal, which is often far less expensive than swapping the whole window.
- Warped or seized sash balances on CGI single hung windows. Years of thermal cycling and salt-laden storm winds from both the Atlantic and Gulf sides corrode the internal spiral balance. The sash either slams shut or will not stay up. We stock CGI-compatible replacement balances in common lengths and can typically restore the window same day.
- Roller and track degradation in CGI sliding glass doors. Davie’s fine limestone dust from equestrian properties works its way into the stainless rollers and grinds the bearings. Doors bind, fall out of alignment, or fail to latch properly. We clean or replace the rollers, realign the track, and adjust the strike plate so the lock actually engages.
- Stripped or corroded hinge hardware on CGI casement and awning windows. The original zinc-plated hinges on earlier CGI models corrode after years of exposure to humid air, making the window difficult to close and lock. We replace with stainless steel hinge assemblies that match the original profile and restore full compression on the weatherstripping.
- Brittle or missing weatherstripping on CGI Estate and Targa series impact windows. South Florida UV breaks down the vinyl bulb seals over time. Air leaks, water intrusion, and a noticeable loss of sound attenuation follow. Replacing the weatherstripping is a same-day fix in most of Davie.
One recent fix: on a 2004 CGI Windows 4000 single hung in a Davie ranch, our tech found the balances had seized and the sash would not stay up. We pulled the old spiral balances, cleaned the track, installed new 35-inch CGI-compatible replacements, and lubed the tilt mechanism. Same-day fix, no new window needed. That is the kind of targeted repair most companies will not offer, because selling a window is easier than fixing one.
CGI Parts & Our Repair-vs-Replace Approach
We source genuine CGI replacement parts through our distributor network: balances, rollers, locking mechanisms, weatherstripping, and impact glazing. When CGI has discontinued an original component, we use Milgard or custom-machined equivalents that match the original profile exactly. We will tell you which is which before we make the repair, and we will never install an aftermarket part without your knowledge.
The repair-versus-replace decision is straightforward. If your CGI window is under fifteen years old and has a single point of failure, we repair it. A seized balance, a worn roller, a failed seal, a corroded hinge: these are parts problems, not frame problems. But if your window has multiple seal failures, visible frame rot, or damage to the impact glazing channel itself, we recommend full-frame replacement. Piecemeal repairs on a failing frame just delay the inevitable and cost more over time. If it is not right on paper, it will not be right in the wall.
Call (863) 208-5172 and we will tell you honestly which path your windows actually need.
Our CGI Service Process - Step by Step
- 1
Diagnosis. We inspect the entire window or door, not just the symptom. If a sash will not stay up on a CGI Estate Series, we check the balances, the tilt mechanism, and the track alignment. A Davie homeowner should know the full picture before paying for a fix.
- 2
Repair or install. We use genuine CGI parts when available and OEM-compatible equivalents when they are not. Every opening is measured twice. Every frame is checked for square before the new unit goes in. If the rough opening is out of true, we correct it rather than shimming the gap and hoping.
- 3
Test. Before we leave, we cycle the window or door fully. Sash up and down. Casement open and closed. Sliding door rolled the full length of the track. Lock engaged and released. Water test on the exterior seal where applicable. We do not leave until it works the way the manufacturer intended.
- 4
Warranty registration. We register both manufacturer warranty layers in writing, state the durations, and give you a copy. Our Done Right Promise covers the workmanship. If something is not right within 90 days, we make it right, no paperwork, no arguing.
CGI Products We Service & Install in Davie
We service and install the full CGI lineup: the Estate Series impact windows with their heavy-gauge aluminum frames; the Targa Series with stainless steel hardware and high design pressure ratings; the Classic Series for direct-mount hurricane protection; and the legacy Windows 4000 Series found throughout older CGI Windows & Doors in Southwest Ranches, FL neighborhoods. Our local stock includes common CGI-compatible balances, rollers, locking mechanisms, and weatherstripping, which lets us complete most repairs in one visit. For full-frame replacement work, we order directly through our distributor network and manage the permit process under Broward County’s wind-borne debris region requirements.
We Also Service These Brands
While this page focuses on CGI Windows & Doors in Cooper City, FL and Davie, our technicians work across more than a dozen manufacturers. We service and install Andersen, Pella, PGT, and others. If your Davie home has a mix of brands, one call covers it. We quote side by side on paper so you can compare without guesswork.
FAQs - CGI Windows & Doors Service in Davie
No. We are an independent CGI service provider, not an authorized factory dealer. That independence is the point. We recommend what is right for your home, not what a manufacturer asks us to push. We do use genuine CGI parts and follow CGI warranty-safe service practices, which protects both your product and your coverage.
Twenty-year-old CGI impact windows can often still pass a wind mitigation inspection if the glazing and the frame are intact and the product has not been modified. But code compliance is a current condition, not a birthright. If the seals have failed, the corner joints have opened, or the laminated glass has degraded, they will not pass. We perform wind mitigation and code compliance checks for Davie homeowners and will tell you honestly where your windows stand. Call (863) 208-5172 and we will put it in writing.
In most cases, the leak is not the glass. It is the outer frame seal. The original bead of sealant between the aluminum frame and the concrete block wall in a Davie ranch home breaks down after ten to fifteen years of Florida sun and humidity. Water works into the gap, runs down the inside of the rough opening, and exits at the bottom corner. We remove the old sealant, tool in a fresh marine-grade bead, and re-secure the frame. A simple fix, but it needs to be done before the water finds its way into the block and starts wicking inward.
Yes, in most cases the insulated glass unit can be replaced without replacing the full sash. The Targa Series uses a glide-in glazing system, which means the IGU can be removed and a new one set with the proper setting blocks and sealant. The laminated impact glass and the spacer bar are ordered to the exact original dimensions. It costs considerably less than a full sash replacement, and we complete the swap in a single visit.
Usually both. The rollers wear out from the grit that works its way into the track, and then the added friction makes the door hard to move. When the door starts getting pulled and shoved instead of sliding, the handle screws loosen repeatedly. We replace the rollers, clean and realign the track, torque the handle hardware, and adjust the strike plate. It typically takes one visit. Call (863) 208-5172 for an exact quote on your door.
They do. The original locking assemblies on the Windows 4000 Series from the mid-1990s used a die-cast zinc body that corrodes in South Florida salt air. The lock body swells, the keeper binds, and eventually the mechanism jams or the thumb turn strips. We replace these with stainless steel or custom-machined CGI-compatible assemblies that match the original cutout. The window itself is often still sound. The lock is not, and replacing the lock is a far better deal than replacing the window.
CGI service in Davie depends on what is wrong. A sash balance replacement or weatherstripping job often runs in the low to mid hundreds per window. A fogged IGU replacement on a Targa or Estate Series typically runs between $400 and $900 depending on size and glass type. Full-frame replacement windows run significantly more, especially for impact-rated units that must meet Broward County’s wind-borne debris standards. We give written, line-item quotes before any work begins, and our pricing is fixed: no change orders, no surprise add-ons. Call (863) 208-5172 to schedule your free estimate.
Book Your CGI Service in Davie, FL
If your CGI windows or doors need service in Davie, call (863) 208-5172. A live person answers 24 hours a day, seven days a week. We will schedule a free estimate, send a uniformed technician who knows CGI products, and stand behind the work with our Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Davie since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.