Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Pembroke Park
Door installation in Pembroke Park, FL runs roughly $400-$2,600 for a standard entry or storm door, and $1,800-$7,500 for a full custom or impact-rated replacement, depending on what’s behind the trim. If you live in one of the manufactured home communities off Hallandale Beach Boulevard or Southwest 52nd Avenue, expect to pay toward the upper end because HUD-code wall cavities are rarely standard depth and almost always need custom jamb work. TruePane Windows & Doors serves Pembroke Park residents who want the opening measured correctly the first time, not patched up the second. Call (863) 208-5172 for a free estimate.
Door Installation in a one-square-mile town where wall depths run shallow and neighbors sit twelve feet away is its own kind of job. We plan staging, parking, and noise before the truck rolls. That’s the difference between a clean one-day install and a stop-work order from park management.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Door Installation Company
Most of our Pembroke Park work happens in manufactured home communities and the older concrete block homes built in the 1960s and 1970s along Southwest 25th Street and Southwest 30th Avenue, where Energy-Efficient Windows - Pembroke Park upgrades make a real difference. Those two housing types have almost nothing in common when it comes to framing depth, and a company that has only ever set doors into 2×4 studs is going to struggle here. We measure every opening twice with a depth gauge before quoting, because a 3-1/4-inch cavity doesn’t give you room to be wrong.
Residents from Pembroke Park to Pembroke Park proper call us for storm doors, entry doors, and custom arched units on the older CBS homes. The reputation we’ve built comes from doing exactly what the quote says, registering both warranty layers in writing before leaving the driveway, and answering the phone when something binds six months later. Dale Kessler, our founder, has kept the same rule on the whiteboard since 2008: if the pane is not true, the job is not done. It sounds simple because it is.
Every TruePane technician is background-checked and uniformed. They work in your home the way they’d work in their mother’s. That matters in a town this small, where word travels fast and a sloppy install on one lot is the talk of the park by Friday.
Our Door Installation Services in Pembroke Park
Storm Doors
Storm doors are the most common request from Pembroke Park’s manufactured and mobile home residents, and for good reason: a well-set storm door protects the main entry from salt air and afternoon downpours without requiring a full structural tear-out. In the HVHZ, a storm door also has to hold up to wind-driven debris, so we recommend units with a Florida Product Approval or Miami-Dade NOA even when the opening is not impact-rated. On a 2×3 wall cavity, we install a custom jamb extension and flashing tape before setting the door, rather than forcing a stock frame into a space it was never designed for.
Entry & Swing Doors
An entry door replacement in Pembroke Park’s older homes usually means the original door has been swelling in summer and sticking in the frame since the Reagan administration. In manufactured homes, the issue is often the opposite: the old door was never properly flashed and now there’s moisture working into the thin metal wall. We quote entry doors side by side from manufacturers like PGT and ES Windows, on paper, so you see exactly what you’re getting for the money. Lead times, warranty durations, and Impact Windows & Doors - Pembroke Park ratings are all spelled out.
Arched & Custom Doors
Some of the 1960s CBS homes in Pembroke Park were built with arched entryways that are beautiful and non-standard. A stock rectangular door doesn’t fit without significant modification, and a contractor who tries to make it work is going to leave you with cracked stucco and a header that doesn’t bear properly. We order custom arched units from manufacturers who can match the radius, and we handle the rough-opening adjustment in-house. It’s more expensive than a slab door, but it’s the difference between an opening that looks original and one that looks edited.
Double & French Doors
Sliding & Patio Doors - Pembroke Park installations in site-built homes tend to go in on rear elevations facing a patio or carport. The local challenge is wind load: a pair of doors has twice the hardware and twice the failure points, and HVHZ requirements for mullion reinforcement and impact glass add roughly 30-50% to the cost compared to a single door. We quote PGT and CGI impact-rated French door setups frequently for homeowners replacing old aluminum sliders that have salt corrosion on the track.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Pembroke Park work we carry stock hardware and adapters for the brands that handle the HVHZ best: PGT, CGI, and ES Windows. When a manufactured home needs a flange-mounted door replaced, we bring the correct adapter kits on the first trip, not the third. That keeps your one-day install on schedule and keeps us out of your neighbor’s parking space before dark.
Common Door Installation Problems We See in Pembroke Park Homes
- Stock doors set into shallow manufactured home walls. A pre-hung door built for a 2×4 or 2×6 wall will sit proud of the interior surface of a HUD-code wall, leaving trim that looks shimmed and gaps that let in humidity. We measured a 1980s unit in Park Lake Estates at 3-1/4 inches deep and used a custom jamb extension to make the new ViewLux impact door sit flush without cutting into drywall that wasn’t there in the first place.
- Salt-air corrosion on hinges and thresholds. Pembroke Park sits about four miles inland, close enough that sea air accelerates oxidation on aluminum frames and steel hinges. A door that opens stiffly in January is often corroded at the hinge knuckles, not just out of alignment. We replace the full hinge set and threshold together, because doing half the job means a callback in two years.
- Stucco cracks from party-wall entry work. On attached CBS homes, cutting into a shared wall for a new entry door without telling the neighbor is how you end up with a liability dispute over stucco cracks. We give advance notice, document the existing condition of the shared wall, and cut clean lines so the repair stays on your side of the property line.
- Non-standard rough openings on 1970s mobile home doors. Many older Pembroke Park units have flanged ‘mobile home window and door’ frames set into thin metal wall cavities. Big-box impact doors won’t fit without custom adapters, and a contractor who shows up without a depth gauge is going to order the wrong unit and disappear for six weeks. We measure on the first visit, always.
Pricing for Door Installation in Pembroke Park, FL
Here’s what we quote for Pembroke Park, based on the housing stock we see most often. A storm door on a manufactured home runs $400-$1,100 including the door, jamb extension, flashing, and labor. A standard entry door replacement runs $900-$2,600 depending on whether the rough opening is standard or needs re-framing. Impact-rated entry doors with an NOA run $2,200-$5,800. Custom arched or French doors range from $3,500 to $7,500 because of the mullion reinforcement and custom sizing. Every quote is line-item, in writing, before any work begins. Call (863) 208-5172 for a free estimate and a straight answer on what your specific opening will cost.
We Also Serve Cities Near Pembroke Park
Our crew serves Pembroke Park and the surrounding Broward communities, including Davie, Cooper City, Southwest Ranches, and Sunrise. Most Pembroke Park jobs are scheduled within the same week, and our Door Installation in Pembroke Park scheduling is handled out of our South Florida office, so there’s no long dispatch delay when you call.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Pembroke Park
Yes, most of the time. Pembroke Park sits inside Broward County’s High Velocity Hurricane Zone, and the county requires doors and windows in manufactured and mobile homes to carry either a Miami-Dade NOA or a Florida Product Approval, regardless of whether you’re buying an impact-rated unit or a standard door. If you order a door without the right approval number, you’ll fail inspection and pay for the labor twice. Call (863) 208-5172 and we’ll check your park’s specific requirements before you spend a dollar on product.
We park the truck in the street or in a designated guest spot if the park requires it, and we only bring tools and materials onto the lot as they’re needed. On narrow lots in communities like Park Lake Estates, that means the door slab stays in the truck until the old unit is out and the rough opening is prepped. It keeps the lawn from getting torn up and keeps the neighbor’s fence line untouched.
Assuming the wall is 2×4. HUD-code manufactured homes built into the 1980s and 1990s often have wall cavities as shallow as 2×3 inches, which means a stock pre-hung door won’t sit flush and the trim will float off the wall. If you’re not sure what’s behind the interior paneling, call (863) 208-5172 for a measurement before you order anything.
On attached CBS homes, cutting into a shared wall for a new entry or side door means coordinating with the neighbor, documenting existing stucco condition, and cutting clean lines so you don’t crack the wall on their side. We handle the party-wall notice ourselves and make sure the work stays entirely on your property. The last thing you want on a dense lot is a dispute with the person who lives twelve feet away.
Yes. Most of the parks in Pembroke Park have posted quiet hours, typically from late evening until early morning, and park management enforces them strictly. We schedule demolition and cutting work for the middle of the day and keep the radio off when we’re working close to a neighbor’s living room window. A full-day door replacement can be done in one visit without testing the park’s patience.
Call (863) 208-5172 to schedule your free door installation estimate in Pembroke Park. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.