Door Installation in Fort Lauderdale - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Fort Lauderdale

A properly installed exterior door in Fort Lauderdale is not a simple swap. It is a structural decision governed by Broward County’s High-Velocity Hurricane Zone code, and the wrong product or paperwork will fail inspection and get torn out. At TruePane Windows & Doors, we install entry, swing, French, bifold, pivot, and storm doors that meet Miami-Dade NOA requirements and hold up to canal-front salt air. Call (863) 208-5172 for a free estimate, and a live person answers, day or night.

Call (863) 208-5172

Why TruePane Windows & Doors Is Fort Lauderdale’s Preferred Door Installation Company

Our crews work Fort Lauderdale streets every week, from Rio Vista to Coral Ridge to Sailboat Bend, and we understand what a tight lot, a shared wall, or an HOA façade review does to a door job. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We bring that same standard to doors. Homeowners in Fort Lauderdale call us because the work is done right the first visit, the warranty layers are registered in writing before the truck leaves the driveway, and the Done Right Promise means we stand behind it with no paperwork fights. If something is not right, we make it right.

We work on mid-century CBS houses in Progresso, canal-front homes on the eastern side of the city, and high-rise condos along A1A where upper-floor door replacement often requires specialized rigging and HOA façade approval. That experience shapes the quote. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before we leave. When you call (863) 208-5172, a live person answers. Not a voicemail tree. That is how a company acts when it plans to be in town in thirty years.

Our Door Installation Services in Fort Lauderdale

Entry & Swing Doors

Entry doors in Fort Lauderdale take a beating from wind-driven rain, direct sun, and salt air. We install impact-rated fiberglass and steel entry systems with marine-grade hardware that will not pit within a few seasons. On older Coral Ridge and Sailboat Bend homes with original 1960s framing, we correct rough openings that have settled and shifted, because a new door hung in an out-of-square jamb will bind in July and leak in a September downpour. We quote it straight: the framing work is in the estimate, not a surprise later.

Double & French Doors

Double and French doors on Fort Lauderdale homes are often the primary visual feature of a living room or patio. They are also a weak point in a storm if the panels were not designed to interlock and seal under pressure. We install pairs that carry a current Miami-Dade NOA and set them so the astragal meets tight, the bottom sweep clears the threshold, and the locking hardware engages without force. A set that opens and closes with ease is the sign the job was done right.

Bifold & Folding Doors

The canal-side and Intracoastal properties east of I-95 love a folding door that opens the whole rear wall to water views. That desire runs head-on into HVHZ code. Every permitted bifold door in Fort Lauderdale must be engineered for impact loads and specified for the exact opening dimensions and exposure category. We handle the product selection, the structural review, and the permit paperwork, and our crews stage everything on the driveway so the install moves in one day on most single-family lots.

Pivot Doors

A pivot door is a different animal from a hinged door: the weight rides on a top and bottom pivot, and the slab has to be balanced and true or it will sag and scrape. We install pivot doors on newer modern homes in Fort Lauderdale’s waterfront neighborhoods, and we are careful about stainless steel pivot hardware rated for marine exposure. Stock hardware corrodes fast here. The job is not done until the door rotates on its axis with one hand and the reveal is even all the way around.

Trusted Brands We Service in Fort Lauderdale

TruePane is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and ES Windows, and we specify those brands for Fort Lauderdale because their impact-rated product lines carry Miami-Dade NOAs and marine finishes that hold up on canal-front homes. When a Fort Lauderdale customer asks for a side-by-side quote, we put the manufacturer lines on paper with the warranty durations stated, so the homeowner sees exactly what they are buying. That is how we do a square deal.

Common Door Installation Problems We See in Fort Lauderdale Homes

• Corroded frames on canal-front homes: Standard aluminum finishes fail within a few seasons of salt-air exposure, leaving white powder residue and hardware that seizes. The fix is a marine-anodized or fusion-welded frame with stainless steel hardware, not a band-aid hinge replacement.
• Failed NOA documentation: A door can be genuinely impact-rated, but if the Notice of Acceptance is expired or not on file, a Broward County inspector will flag it and potentially require tear-out. We file the paperwork before the inspector arrives.
• Out-of-square rough openings in mid-century CBS homes: The original concrete block openings in Rio Vista, Coral Ridge, and Sailboat Bend have settled over sixty years, and a new door shimmed into an out-of-true opening will bind and leak. We correct the rough opening so the install is true.
• Humidity-driven seal failure: Sixty-plus inches of annual rainfall and persistent onshore moisture cause glazing seals and weatherstripping to break down faster here than in inland Broward communities. We install seals and sweeps rated for marine exposure and direct rain.

Pricing for Door Installation in Fort Lauderdale, FL

A typical single entry or swing door replacement in Fort Lauderdale runs $1,800 to $4,200 installed, depending on whether the unit is impact-rated and what the rough opening requires. Double and French doors start around $4,500 and go up from there; bifold and folding door systems on canal-front homes often land between $8,000 and $18,000 because the product itself is engineered for HVHZ loads and the installation involves structural review. Pivot doors start near $5,000 for a standard slab and climb with custom sizing and marine-grade hardware. Storm doors are the most affordable entry point, typically $700 to $1,600 installed. Permit fees and any masonry repair to the rough opening are separate line items, and you will see them before work starts. Call (863) 208-5172 to schedule a free estimate, and we will put the numbers on paper.

We Also Serve Cities Near Fort Lauderdale

Our crews regularly work in Hollywood, Miami Gardens, and Pembroke Pines, and we bring the same HVHZ code knowledge and salt-air spec discipline to every door we install. If you are in a nearby community and want to know whether your project is a candidate for Door Installation services from TruePane, call (863) 208-5172 and describe your opening. We will tell you straight.

FAQs - Door Installation in Fort Lauderdale

Staging, Parking, and Permits: The True Cost of a Door Job in Fort Lauderdale

Fort Lauderdale streets, especially east of US-1 and in the older neighborhoods along the Middle River, are narrow. A crew cannot just park a box truck in front of a Sailboat Bend bungalow and block the lane while someone runs a saw. We plan the staging: what sits in the driveway, what stays on the truck, and what gets carried in by hand. On a shared-wall property or a condo, we also coordinate with neighbors and the HOA so the work does not become a conflict. A door install in a single-family home on a wide Coral Ridge lot is a one-day job. The same door on a narrow Progresso street may take longer, cost more for access, and require a second set of hands. We quote that difference in writing before the job starts.

The permit side is just as local. Fort Lauderdale is in Broward County’s High-Velocity Hurricane Zone. Every permitted door replacement must use a product with a current Miami-Dade NOA, and the inspector will check that documentation against the door schedule. On canal-front homes, there is the second layer: salt air corrodes standard aluminum in a few seasons, so marine-anodized finishes and stainless steel hardware are not an upsell here. They are the minimum viable product. We recently replaced a corroded 1990s aluminum swing door on a canal-front home in Rio Vista, where the original non-marine finish had pitted so badly the jamb was binding and the glazing seal had failed. Our crew staged the new impact-rated door and tools in the driveway, worked within the city’s noise window, and swapped in a fusion-welded frame with stainless steel hardware, then filed the NOA paperwork with the permit before the inspector arrived. That is the job done right for Fort Lauderdale.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale with impact-rated door installation and HVHZ-compliant workmanship.

Call (863) 208-5172 to schedule your free estimate for door installation in Fort Lauderdale. We will answer the phone, measure the opening, and give you a written quote you can hold us to.