Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across West Park
Custom window and door work in West Park is not a simple swap-out job. Most homes here were built between the 1950s and 1970s as CBS construction, long before West Park became a city in 2005 or Broward County started enforcing HVHZ impact standards on every permitted opening. That means nearly every custom window or door project we quote in West Park is a full-frame replacement that must meet Florida High Velocity Hurricane Zone code. No shortcuts, no partial upgrades. We know this because we have been pulling permits and passing inspections on these same blocks for years. If you want a straight answer about what your West Park home actually needs, call (863) 208-5172 and we will walk you through it.
Key Takeaways:
- West Park sits inside the HVHZ, so any permitted window or door replacement must carry NOA (Notice of Acceptance) impact ratings.
- Original jalousie windows and single-pane aluminum sliders from the 1950s-1970s cannot be repaired or retrofitted to code. They must be fully replaced.
- Pulling a permit in West Park triggers whole-opening compliance on pre-2005 homes. Partial upgrades fail inspection.
- TruePane registers both warranty layers in writing and stands behind every install with a Done Right Promise.
Why TruePane Windows & Doors Is West Park’s Preferred Custom Windows & Doors Company
West Park homeowners have good reason to be particular about who touches their windows and doors. The housing stock here is specific: concrete block and stucco ranch homes and split-levels built in the 1950s through the 1970s, many with original jalousie or single-pane aluminum slider openings. Those openings sit inside one of the strictest glazing code zones in the country. We have worked enough jobs along SW 40th Avenue, Hallandale Beach Boulevard, and the neighborhoods around McTyre Park to know exactly what a Broward inspector will look for when they sign off on your permit.
Most of our West Park customers come to us after a bad experience or a failed inspection from someone who quoted the wrong product. They want a company that measures every opening twice, puts the quote on paper with both warranty layers stated, and registers those warranties before the truck leaves the driveway. That is what we do. Dale Kessler founded TruePane on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. Every West Park job gets that standard.
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and we quote them side by side on paper so you can see what you are paying for. When you call (863) 208-5172, a live person answers. Not a voicemail tree. Not a callback form. We have been doing this work locally since 2008 through a second-generation glazier’s craft tradition, and we plan to be in town in thirty years when your warranty question comes up.
Our Custom Windows & Doors Services in West Park
Our Custom Windows & Doors team handles everything from shaped openings to full storefront reglazing. In West Park specifically, the work almost always intersects with HVHZ compliance. Here is what we do most often:
Custom Shape Windows
West Park’s older CBS homes frequently have arched, eyebrow, radius, and half-round openings that were originally fitted with single-pane glass in aluminum or wood frames. Replacing those shapes with code-compliant impact glazing is skilled work. We template every custom shape on site, order the NOA-rated insulated glass unit to the exact radius, and set the new frame in a fusion-welded surround that Broward inspectors will pass the first time. A half-round window over a front door on SW 41st Avenue is no place for a field-cut guess.
Commercial Storefront Glazing
West Park has a concentration of small storefronts and offices along Hallandale Beach Boulevard and SW 40th Avenue, many of them in buildings that predate city incorporation. A storefront reglaze or full replacement that pulls a permit here must meet the same HVHZ impact standards as a house on a residential street. We quote commercial storefront work in West Park with the right NOA-rated glass and frame systems so your business does not get red-tagged mid-project. Clear pricing, written line items, one crew, no second appointment left hanging.
Curtain Wall Systems
For West Park commercial properties and the occasional modern residential build, curtain wall systems carry the highest wind-load demands in the state. We install and service curtain wall packages that meet Miami-Dade NOA standards, which is what Broward enforces inside the HVHZ. The big failure we see here is contractors quoting a non-rated curtain wall because it is cheaper. It will not pass inspection in West Park. We do not quote it because we will not install it.
Architectural Grilles & SDLs
Homeowners in West Park who want a traditional divided-light look on a new impact-rated window or door need architectural grilles or simulated divided lites, not a real individual-lite install. True divided lites cannot hold the structural rating required inside the HVHZ. We spec SDL packages with the muntins applied to a single rated IGU, so you get the look of a 1960s Florida ranch without sacrificing the NOA rating or the warranty. Brands like ES Windows and ECO Window Systems carry several SDL patterns we quote regularly for West Park homes.
We also handle oversized glass panels, which come up often in West Park when homeowners open up a rear wall to a screened lanai or patio. Oversized panels in this city are not a stock-order item. They are engineered for wind load, templated to the opening, and set with a crew that knows how to handle a 300-pound IGU without twisting the frame. If you are considering a big fixed panel or a sliding glass wall, call us before you commit to a quote from someone who has never done one in Broward.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Park
We are an authorized installer for more than a dozen manufacturer lines, and for West Park customers we most often quote PGT, CGI side by side on paper. In the custom and shaped window category, we work with CWS, ES Windows when the opening calls for something beyond a standard size. Because West Park jobs almost always require NOA-rated product, we do not push lines that cannot produce Broward-accepted documentation. We keep a running inventory of common gaskets, balances, and hardware for the brands already installed across West Park’s 1950s-1970s housing stock, so service calls on existing windows do not stall waiting on parts from a regional distributor.
Common Custom Windows & Doors Problems We See in West Park Homes
- Jalousie windows flagged for full replacement. The glass-louver style common in West Park’s postwar tract homes physically cannot be made impact-resistant. The moment a Broward permit is pulled, the inspector flags every jalousie opening for full-frame removal. We quote a complete opening replacement every time.
- Non-rated insulated glass units that fail inspection. Some contractors save money by installing a thermal-only IGU with no NOA for the frame or glass. West Park lies inside the HVHZ, so Broward rejects it. You pay twice: once for the wrong window, again for the right one.
- Wind-driven rain through unflashed jamb gaps. A double-hung installed without butyl flashing tape at the jamb leaves a gap that a summer thunderstorm will find. Water gets behind the stucco, rots the CBS wall cavity, and you do not know until the paint bubbles months later. We flash every opening, every time.
- Original aluminum slider frames left in place. A cheap quote may propose replacing only the glass and leaving the 1960s aluminum frame. Pre-2005 West Park homes are subject to full-opening compliance once a permit is pulled, so partial upgrades get rejected. The frame goes, or the permit fails.
Pricing for Custom Windows & Doors in West Park, FL
West Park pricing tracks with the rest of southern Broward, with the added layer that every permitted opening must carry NOA impact ratings. A standard custom-shaped window replacement in West Park, such as an arch-top or radius unit with impact-rated glass, typically runs $1,200 to $3,400 per opening depending on size and frame material. Oversized glass panels start around $2,800 and go up with the engineering load. Architectural grilles and SDL patterns add $180 to $450 per sash. Commercial storefront glazing in West Park generally lands between $65 and $120 per square foot for NOA-rated systems. A full retrofit of a 1950s CBS ranch with original jalousies, which means replacing every opening, commonly falls in the $14,000 to $28,000 range depending on window count and door package. These are honest ballpark numbers. We give free written estimates with exact line items and we do not change the price after the contract is signed. Call (863) 208-5172 to schedule yours.
We Also Serve Cities Near West Park
TruePane serves Custom Windows & Doors in West Park and the surrounding communities across southern Broward. If you are in Davie, Cooper City, Southwest Ranches, or Sunrise, we run crews to those neighborhoods regularly and can schedule your estimate without sending you to a regional office first. Same crew, same warranty, same standard. Call (863) 208-5172 and tell us which city you are in.
Serving West Park, FL - Our Local Coverage Area
We’re based in the West Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in West Park
Yes. Every permitted window or door replacement in West Park must carry a Notice of Acceptance, because the entire city sits inside Florida’s High Velocity Hurricane Zone. The NOA is the document that proves the specific glass-and-frame combination passed the required wind-load and impact testing. Without it, Broward County will not sign off on the inspection. A compliant quote will list each opening’s NOA number or at minimum the manufacturer and product line with its NOA on file. Call (863) 208-5172 and we can show you exactly what that documentation looks like before you sign anything.
No. Jalousie windows physically cannot be made impact-resistant, and Broward inspectors flag them for full-frame removal the moment a permit is pulled. There is no retrofit kit, no shutter workaround for the opening itself, and no way to pass a West Park inspection while leaving a jalousie in place. If you have jalousies and you are considering any permitted window work, plan on replacing every one of those openings. We quote complete jalousie-to-impact-window replacements regularly, and we can walk you through the process over the phone at (863) 208-5172.
Your claim can be denied, and in some cases your policy can be reviewed for non-disclosure. Florida insurers are increasingly strict about documenting wind-mitigation features, and a non-compliant window installed in an HVHZ home becomes a liability on the property record. If a storm damages the home and an adjuster finds non-rated windows where Broward required rated ones, the insurer has grounds to deny the claim. The right windows, installed with valid NOAs and both warranty layers registered in writing, protect the claim and the home. Call (863) 208-5172 for a free estimate on a compliant replacement.
It depends on the specific opening and how the enclosure is classified, but in most West Park cases the answer is yes. Any door that opens from a living space into a screened enclosure is still considered part of the building envelope, and once a permit is pulled on a pre-2005 home, Broward applies HVHZ requirements to that opening. The practical upshot is that a cheap non-rated door on a screened room will fail inspection. We quote rated and non-rated options only when the code actually allows them, and we will tell you straight if your enclosure door needs the full NOA treatment.
A compliant quote lists every opening with its product line, its NOA or Miami-Dade approval number, the frame material, the glass package, and the exact warranty durations for both the manufacturer layers and the workmanship. It includes permit filing, full-frame demolition, flashing tape at every jamb, and a final inspection that passes the first time. A cheap quote leaves out the NOA, leaves the old frame in place, skips the flashing, and you find out when the inspector rejects it or the next storm finds the gap. Ours includes all of it, in writing, before you sign. Call (863) 208-5172 for a free estimate and see the difference on paper.
Call TruePane for Custom Windows & Doors in West Park
If you are looking at jalousie windows that need to go, an aluminum slider that leaks in a summer storm, or a custom shape that has to meet Broward code, we can help. We will quote the right product, pull the permit, install it true, and register both warranty layers before we leave your driveway. The estimate is free and a live person answers when you call. Reach us at (863) 208-5172.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving West Park and southern Broward County with code-compliant window and door installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.