Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Custom & Geometric Windows in Davie: What to Know First
We provide independent ViewLux custom and geometric window service in Davie - installation, repair, rebuilds, and replacements for arched tops, eyebrow units, trapezoids, triangles, circles, and oversized openings. Most ViewLux jobs take three to ten business days from measure to finished install, depending on whether we’re sourcing OEM glass, rebuilding a sash, or fabricating a replacement unit through one of our partner lines. Pricing is honest and line-itemed, never a lump sum, because a custom window should not come with a mystery attached. If you own ViewLux windows in Davie and you’ve been told they can’t be fixed or that you have to replace the entire opening, call us at (863) 208-5172 before you spend that money.
This page is for homeowners in Davie who bought ViewLux windows expecting them to last, and now have a geometric unit that fogs, leaks, sticks, or simply looks wrong. We are an independent ViewLux service provider - not affiliated with or authorized by ViewLux - and that independence is the point. We fix what the warranty department would rather replace, and we replace what genuinely cannot be saved, with the numbers on paper before the truck leaves the driveway.
How ViewLux Products Fail - and How We Fix Them
- Insulated glass seal failure in ViewLux arched and radius units. ViewLux built a strong name in the 1990s and 2000s on shaped windows - circles, half-rounds, eyebrows - that other manufacturers charged a fortune for. What we see now, three decades on, is that the primary seal on those curved IGUs degrades faster than on rectangular units, because the curved glass edge puts uneven stress on the spacer. You’ll see condensation between the panes in the morning, especially on the east-facing arch over your entry. We remove the sash, have the IGU rebuilt to the exact radius with fresh Low-E glass, and reset it in the original frame. The alternative, replacing the entire window, costs two to three times more and is not always necessary.
- Warped or misaligned frame corners on ViewLux geometric picture windows. Davie’s humidity cycle - wet summers, dry winter fronts, and a rainy season that starts like clockwork in late May - works on wood and vinyl alike. On ViewLux trapezoid and triangle picture units, the mitred corners can open up a hair, which lets air and water in and can pull the whole unit slightly out of square. When the pane is not true, the job is not done. We shim, refasten, and reseal the frame, then reset the glass so the reveal is even. If the frame is too far gone, we will tell you plainly and quote a replacement instead of patching a problem that will come back in two seasons.
- Hardware fatigue on ViewLux casement and awning shaped units. ViewLux offered a line of operable geometric windows - small eyebrow awnings, half-circle casements - where the crank and hinge hardware was built light. After 20-plus years of salt air and storm cycles, the operator gears strip and the arms bend. The sash sags and won’t close square, and the owner starts noticing a draft around the gasket. We replace the operators and hinges with heavier aftermarket hardware where OEM is no longer available, and we set each sash so it closes with even compression on the seal.
- Leak paths around ViewLux radius windows with integral nailing fins. Radius windows depend on a continuous flashing plane to shed water. On many Davie homes we reassign the leak to an old construction habit: the fin was nailed tight to the sheathing and flashed with builder paper only, no membrane, no sealant behind the curved flange. The first strong afternoon storm - the kind that rolls off the Everglades from late June through September - drives water up behind the fin and into the wall. We remove the cladding, inspect the rough opening, and reflash the unit with modern self-adhered membrane and a sloped sill pan before the window goes back in. That’s a repair that addresses the actual hole, not the symptom.
- Obsolete glass packages with no direct replacement. ViewLux has changed ownership and glass sourcing several times. Some Davie homeowners who bought ViewLux in the late 90s or early 2000s have a tinted glass package that ViewLux no longer sources. When OEM is gone, we match the visible tint and performance with a quality aftermarket IGU - same curvature, same thickness, same Low-E spec - so the window still looks like its siblings on the other side of the room. We put the comparison in writing before we order, because you should know exactly what you’re buying.
Our ViewLux Custom & Geometric Windows Process
Every ViewLux job we take follows the same path. No shortcuts, no change orders, no surprises.
- 1
You call. A live person answers, at any hour, and listens. You describe the window - where it is, what shape, what it’s doing - and we schedule a measure call at a time that works for you.
- 2
We measure and diagnose. A background-checked, uniformed technician arrives, measures the opening twice, and figures out why the window failed. Sometimes this is a ten-minute look. Sometimes we need to open the casing. We will not quote anything until we know what we’re into.
- 3
We decide the parts path. If factory ViewLux parts are still available and warranty-safe, we use them. If OEM is gone or the warranty has run, we source from aftermarket fabricators we’ve worked with for years. Either way, the option goes on paper next to the other, with prices.
- 4
You get a written quote. Line item by line item. Glass, hardware, flashing, labor, disposal. No lump sum. If it is not right on paper, it will not be right in the wall.
- 5
We do the work. On the scheduled day, the technician arrives clean, prepares the work area, and completes the job. Most single-unit repairs and replacements finish in one visit.
- 6
We register the warranty and leave. Every warranty layer - manufacturer’s and our Done Right Promise - is registered in writing with durations stated before the truck pulls away. The invoice matches the quote to the penny.
What ViewLux Custom & Geometric Windows Costs in Davie
Here’s what Davie homeowners typically pay for the common ViewLux scenarios we handle. These are real ranges for this market, not national averages.
- Replacement IGU for a ViewLux radius or arch window (glass only): $380-$850 per unit, depending on size and radius. A two-pane 24×36 half-round runs near the low end; a six-foot eyebrow over a front door runs higher.
- Full sash rebuild for an operable ViewLux shaped casement or awning: $420-$980. That includes new hardware, gaskets, and re-glazing, assuming the frame itself is sound.
- Reflashing and resealing a leaking ViewLux radius unit: $500-$1,400. The spread reflects how much cladding removal is needed and how much rotted sheathing we find once we get in.
- Full replacement of a ViewLux geometric picture window with a comparable custom unit from PGT, CGI, or ES Windows: $1,800-$5,500, depending on glass package, shape complexity, and whether we’re matching an impact rating.
- Hardware replacement on a ViewLux operator (crank, hinge, balance): $180-$360 per window.
Three things move the price on any ViewLux job: the radius of the curve (tighter curves cost more to fabricate), whether the unit needs impact-rated glass to meet code, and whether we discover wall damage behind the flange. We quote conservatively and we do not bill for what we don’t do. Call (863) 208-5172 for a free estimate on your specific window - you’ll get a written number, not a verbal guess.
Why Davie Homeowners Call TruePane Windows & Doors for ViewLux Work
Dale Kessler grew up off Orange Drive near the old Davie Arena, learned the trade at McFatter Technical College, and has been setting and sealing windows in Broward County for twenty-six years. We have been fixing other people’s failed installs since 2008, when he started this company on the principle that an out-of-true frame and a voided warranty were problems worth fixing permanently. When a ViewLux owner calls us, they get a tech who has seen their exact failure mode before - not a trainee with a price sheet. We stand behind every job with our Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves the driveway. If a ViewLux window is genuinely beyond saving, we install quality replacement brands - PGT, CGI, CWS, ES Windows - and we show you the side-by-side comparison on paper so you can make the call with the facts in front of you.
FAQs
It depends on the era and the specific part. For older ViewLux windows sold before the brand changed hands, OEM parts are often discontinued, but we source quality aftermarket hardware and glass through fabricators we’ve worked with for years. We match the radius, tint, and glass spec so the repair is visually and functionally identical to the original. Call (863) 208-5172 and describe your window - we can usually tell you over the phone whether OEM or aftermarket is the realistic path.
If the window is still under the original ViewLux warranty, a third-party glass replacement may void coverage, and we will tell you that plainly before we do anything. In most cases, by the time a ViewLux window in Davie needs a glass replacement, the warranty has long expired, and the question is moot. When warranty is still active, we will help you understand your options and the trade-offs involved.
In most cases, yes. We remove the sash, send the failed IGU to a fabricator who rebuilds it to the exact curve, and reset it in the original frame. A full glass replacement runs $380 to $850 per arch in Davie depending on dimensions. If the sash frame itself has deteriorated, we will show you why replacement is the better call and quote both options side by side.
Most ViewLux repair and rebuild jobs are scheduled within a week in Davie, and single-unit repairs are completed in one visit. The glass fabrication time for curved or radius IGUs adds a few days to a week, depending on the fabricator’s queue. We will tell you exactly when the truck is coming and when the finished window is going back in, and we’ll be there when we say.
We do. When a ViewLux unit is beyond repair or not worth the money, we quote fully custom geometric and shaped replacements from manufacturers like PGT, CGI, CWS, and ES Windows - including impact-rated units that meet Broward County code. You get a written line-item quote and a second opinion you can trust, because we do not make a commission on the brand we recommend.
When your ViewLux window is fogged, leaking, or pulling out of square, call TruePane Windows & Doors at (863) 208-5172. A live person answers, we measure twice, and you get a written quote before any work begins. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.