Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Sliding Glass & Patio Doors in Davie: What to Know First
TruePane Windows & Doors provides independent Therma-Tru sliding glass and patio door repair, replacement, and tune-up work for homeowners throughout Davie. Most Therma-Tru sliding door repairs in Davie homes are completed in a single visit, with parts sourced same-week when a specialty component is needed. Honest pricing, written line-item quotes, and both warranty layers registered on paper before the truck leaves your driveway: that’s the posture on every Therma-Tru job we take.
This page is written for the Davie homeowner who has a Therma-Tru slider or patio door that is sticking, leaking, or fogging, and wants to know what it will take to fix it right. If that’s you, call (863) 208-5172 for a free estimate.
- Key takeaway: Therma-Tru sliding doors fail in predictable ways, and most are repairable without a full replacement.
- Key takeaway: We are an independent Therma-Tru service provider, not a factory-authorized dealer. That means we can quote you OEM and quality aftermarket parts side by side.
- Key takeaway: Every Therma-Tru job is covered by the Done Right Promise and The Keystone Standard.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru built its reputation on entry door systems, but in Davie the patio door product lines see specific recurring failures. Here is what we find most often across Therma-Tru sliding glass and patio door jobs in Davie homes:
- Roller assembly wear on Therma-Tru sliding patio doors. Therma-Tru sliders use a two-roller steel carriage that gets gritty with the sand and fine soil common around Davie properties. We see rollers grind down on Green Meadows and Shenandoah homes until the door rides on the track itself, which scores the aluminum rail and eventually makes the door bind in the July heat. Our fix: replace the roller carriage, inspect the track for gouging, and adjust the door so it rides true, not just moves.
- Weatherstripping compression failure on Therma-Tru hinged patio doors. The Therma-Tru patio door lines with a fiberglass frame rely heavily on compression-sealed weatherstripping. After several Davie wet seasons, the bulb gasket flattens and loses memory, especially on the strike side and the top corner where afternoon sun hits. You will feel a warm draft at the latch in August and see light bleeding past the seal. We replace the gasket with a profile matched to the door’s original groove, then perform a candle test across the entire perimeter before we call the door done.
- Therma-Tru fiberglass frame hairline cracking at the threshold corners. This one is specific to Therma-Tru’s fiberglass patio door frames in slab homes where the threshold sees direct sun and frequent foot traffic. The corner welds, where the jamb meets the threshold, develop hairline cracks that are nearly invisible until water wicks in during a hard Davie downpour. On a recent Flower Park area repair, the crack was less than an inch long and had been pulling water across the tile for two seasons. Our fix involves a structural epoxy repair of the corner, re-sealing the threshold, and confirming a correct weep system path before we clear the job.
- Fogged insulated glass units on Therma-Tru French patio doors. The dual-pane units in Therma-Tru French patio doors eventually lose their argon fill and develop interior condensation, especially in Davie where the humidity runs high nearly year-round. The visible symptom is a haze between the panes that you cannot wipe off with glass cleaner. The cause is seal failure around the spacer, not installer error and not a household humidity problem. Most often, the glass pack is replaceable without replacing the entire door, which saves the homeowner 40-60% over a full door swap.
- Strike plate alignment issues on Therma-Tru two-panel patio doors. On Therma-Tru patio doors with an active and passive panel, the passive door’s top and bottom shoot bolts connect through a header and threshold strike. In Davie homes on shifting clay-heavy soil, we see these strikes drift out of alignment within a few years. The door still latches, but it leaves a small gap at the top that lets conditioned air escape. We re-align the strikes, reset the shoot bolts, and check the reveal around the whole door to match the manufacturer’s intended plane.
Our Therma-Tru Sliding Glass & Patio Doors Process
Here is how a typical Therma-Tru sliding glass or patio door job runs from the first call to the final walkthrough:
- 1
Call and diagnostic visit. You call (863) 208-5172, a live person answers, and we schedule a diagnostic visit. Dale Kessler or one of our background-checked technicians measures the door, inspects the failing components, and documents exactly what is out of true.
- 2
Parts decision on paper. We present OEM Therma-Tru components and quality aftermarket options where they are genuinely equivalent, with prices written side by side. If the pane is not true on paper, it will not be true in the wall, so there is no guesswork at this stage.
- 3
Warranty verification. Before any work starts, we confirm whether the existing Therma-Tru warranty still applies and what it covers. If the manufacturer will not stand behind the part, we put that in writing so there is no ambiguity.
- 4
The repair or replacement. Our uniformed technician completes the work in most cases the same day. We protect the surrounding flooring with drop cloths, remove the failed components cleanly, and install the new parts to Therma-Tru specifications.
- 5
Function test and sealing verification. We run the door through full open-close cycles, check alignment with a level, test the seal with a candle or smoke pen, and verify the lock and shoot bolts engage properly.
- 6
Warranty registration and cleanup. We register both manufacturer warranty layers in writing, hand you the paperwork, and clean the work area before we leave. Every job carries the Done Right Promise: if it is not done right, we make it right, no paperwork fights and no arguing.
What Therma-Tru Sliding Glass & Patio Doors Costs in Davie
Therma-Tru sliding glass and patio door pricing in Davie depends on whether you are repairing existing hardware or replacing the entire door system. Here are the ranges we see most often in this market:
- Roller assembly replacement (sliding door): $180 to $340 per panel, including parts and labor.
- Weatherstripping replacement: $120 to $260 per door, depending on the profile and linear footage.
- Insulated glass pack replacement (fogged Therma-Tru French door): $450 to $900 per glass pack, depending on size and Low-E requirements.
- Strike plate and shoot bolt realignment: $140 to $290 per door.
- Full Therma-Tru patio door replacement: $2,800 to $6,500 per door, based on size, glass package, and whether you add impact-rated glazing for the Davie windborne debris zone.
What moves the price: door size, glass package (clear versus Low-E versus impact-rated), threshold condition, and whether we find hidden frame damage during the diagnostic. We give written line-item quotes before work starts, and we do not change the price after the fact. No surprise line items, no second appointment left hanging. Call (863) 208-5172 for an exact quote. Estimates are free.
Why Davie Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We have been serving Davie and the surrounding Broward County communities since 2008 as a glazing tradition, and since 2008 under the TruePane name. Dale Kessler grew up off Orange Drive near the old Davie Arena and learned the trade at McFatter Technical College in Davie, so this is not a franchise playbook and not a regional call center. We know what Therma-Tru doors do after a decade of Davie humidity.
Our technicians are background-checked and uniformed, and they treat your home the way they would treat their own mother’s house. We are also an authorized installer for more than a dozen manufacturer lines including PGT, CGI, CWS, and ES Windows, so when a Therma-Tru door has reached the point where replacement is the honest answer, we can quote you side-by-side options on paper from multiple manufacturers, including impact-rated doors that meet the stricter Florida building code requirements in Davie. And every job, repair or replacement, carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves the driveway. We stand behind it.
FAQs
No, not when the work is done correctly. We are an independent Therma-Tru service provider, and we follow Therma-Tru specifications for all repair and replacement work. We also verify the existing warranty status before we begin and register both warranty layers in writing when a new Therma-Tru component is installed, so the coverage remains intact and documented. Call (863) 208-5172 and we will check your specific door’s warranty status during the free estimate.
Common parts like roller assemblies, weatherstripping, and strike hardware are typically sourced the same day from local distributors, and most repairs are completed in a single visit. Specialty Therma-Tru components, like a custom fiberglass threshold or a nonstandard glass pack, may take five to seven business days to arrive. We will tell you the expected timing before any work is scheduled.
If the frame is structurally intact and the failure is in a replaceable component like rollers, weatherstripping, or the glass pack, repair is the better financial decision almost every time. If the frame shows cracking at the corner welds or the threshold is severely rotted or corroded, replacement is usually the honest answer. We will walk you through the numbers in writing so you can make the call with no pressure. Call (863) 208-5172 for a straight assessment.
Therma-Tru is not the strongest player in the impact-rated patio door category, and we will say that plainly. If impact protection is your priority, we can quote you PGT, CGI, CWS, or ES Windows options side by side with Therma-Tru, so you can compare the engineering, the warranty, and the price on paper. We are an authorized installer for all of those lines.
Most roller replacements, weatherstripping installs, and strike realignments are completed in one to three hours. A fogged glass pack replacement typically takes about two hours once the new unit is on hand. Full patio door replacement is longer, often a full day, and may require a second small visit for stucco touch-up around the frame.
No. We give a written, line-item quote before work begins, and that is the price you pay unless you ask us to expand the scope of the job. No change orders hidden in the fine print, no surprise line items on the bill. It is a square deal, the same way Dale Kessler has done it since he started in this trade.
Get Your Therma-Tru Sliding Glass & Patio Door Fixed in Davie
If you have a Therma-Tru slider or patio door that is fighting you, leaking air, or fogged between the glass, call TruePane Windows & Doors at (863) 208-5172. A live person answers every call, 24 hours a day, 7 days a week. We will schedule a diagnostic visit, give you a written quote, and stand behind the work with the Done Right Promise. If the pane is not true, the job is not done. That is the standard, and it has been since 2008 in Davie.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.