Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Windows & Doors in Davie, FL | TruePane Windows & Doors
We service, repair, and replace PGT windows and doors throughout Davie, Florida, and the work is driven by one local fact most homeowners don’t learn until an insurer sends a nonrenewal letter: Davie sits fully inside Broward County’s wind-borne debris region. For impact-rated replacements, see our Window Installation in Davie. That means impact-rated openings are not optional here, no matter how far inland the town feels. Our crews have spent years servicing PGT’s WinGuard and EnergyVue lines across Davie’s aging ranch home stock, and we know exactly where these products fail in this humid, salt-laden climate. Call (863) 208-5172 for straight answers and a free estimate.
Why Davie Residents Choose Us for PGT Service
We’re an independent PGT service provider, not a manufacturer affiliate. That distinction matters when a homeowner asks whether a repair will keep their opening code-compliant. We answer based on what Broward County actually enforces, not what a catalog says. Dale Kessler, our owner, grew up off Orange Drive near the old Davie Arena and trained at McFatter Technical College before spending twenty-six years setting and sealing windows across Broward County. When a previous install fails its first serious storm, neighbors call us. We keep genuine PGT parts in rotation for this area because we know which failures Davie’s humidity and salt-laden winds produce most often. And because we’ve been serving local communities since 2008 through a craft tradition, not a franchise playbook, our techs measure every opening twice and register both warranty layers in writing before the truck leaves your driveway.
Common PGT Windows & Doors Problems We Solve in Davie
PGT builds solid impact-rated products, but Davie’s specific conditions create predictable failure patterns. Here is what we see most often:
- Thermal seal failure in WinGuard insulated glass units: Davie’s summer humidity works its way into aging IGUs, and the result is fog between the panes that cannot be wiped off. Once the seal is gone, the insulating gas is gone too, and the impact rating is not doing what your insurer assumes it is doing.
- Corrosion on WinGuard aluminum sliding door tracks: Salt-laden storm winds from both the Atlantic and Gulf sides push grit and chlorides into track channels, especially on homes near open agricultural fields where there is nothing to break the wind. Aluminum tracks pit, rollers grind, and doors that once glided start to drag.
- Roller and guide wear on older PGT sliding doors: Years of storm-driven dust and grit act like sandpaper inside the track assembly. Doors bind, jump the rail, or refuse to latch squarely, which compromises the impact rating at the exact moment a storm arrives.
- Weatherstripping compression set around casement and single-hung windows: Rubber and vinyl seals lose their rebound after years of heat cycling. By the time summer storm season rolls around, air and water push through at the sill, and the window no longer seals like it did when installed.
- Hardware fatigue on locking multipoints: PGT locking systems are robust, but corrosion and repeated use wear down the internal points. A door that feels locked may not actually be throwing all its bolts, which matters when Broward County wind-load inspectors come through.
PGT Service in Davie: What Local Conditions Mean for Your Equipment
Here is the information most generic PGT pages never give you because they are written for a national audience. Davie’s housing stock is dominated by concrete-block-and-stucco ranch homes built between the 1960s and early 1990s, and a large share of those original openings are aluminum single-hung windows and patio sliders sized to mid-century standard rough openings. What that means for PGT owners specifically is this: when an original window finally fails and a homeowner wants a quality impact-rated replacement, the rough opening rarely matches modern PGT frame dimensions without modification. The Town of Davie enforces Broward County’s wind-borne debris requirements on every permitted replacement opening, which means you cannot simply drop a stock PGT unit into a 1972 rough opening and assume the inspector will pass it. Add to this the town’s equestrian zoning and a higher-than-typical share of barn-style oversized entry doors, and you get a pattern we see nowhere else in Broward: PGT impact-rated replacement units in Davie often need custom sizing that neighboring Plantation or Cooper City rarely requires. That pushes projects from stock catalog to engineered solution, and it is precisely the kind of scope-of-work surprise that doubles a homeowner’s expected cost mid-permit if the contractor did not plan for it upfront. If it is not right on paper, it will not be right in the wall.
PGT Models & Products We Service in Davie
We service the PGT lines most common in Davie homes, including WinGuard Vinyl Impact Casement & Single-Hung Windows, WinGuard Aluminum Impact Sliding Glass Doors, EnergyVue Low-E Insulated Glass Packages, and PremierVue Vinyl Impact Picture & Fixed Windows. When a repair is needed, we use genuine PGT replacement parts such as rollers, locking multipoints, and insulated glass units when available, because they match the original engineering and maintain impact certification. For discontinued hardware, we source high-quality aftermarket equivalents that meet or exceed factory specs, and we tell you which one you are getting before any work starts. We will advise repair over replacement only when the frame is still structurally sound and the opening meets current Broward County wind-load requirements. Otherwise, full-frame replacement is the safer and more insurable long-term fix, and we will say so plainly.
PGT Service Pricing in Davie
What you pay depends on what failed and whether the repair is a parts swap or a full-frame replacement. A worn roller set on a WinGuard slider is a different job than a fogged insulated glass unit, and an oversized barn-style door that needs custom PGT engineering is different again from a standard rough opening. A free estimate means we come out, measure the opening, identify the exact failure in plain language, and put a written line-item quote in your hand before any commitment. No surprise charges on the back end. We offer upfront pricing, a $50 discount on any repair over $250, a maintenance check, and a permanent 5% discount for seniors and veterans. Call (863) 208-5172 to schedule your free estimate, and you will know the number before the work begins.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Davie
Maybe not. A 2005 PGT window may have met the code at installation, but Broward County wind-load standards and insurer requirements have tightened since then. The only way to know is a wind mitigation inspection that checks the frame type, glazing, and installation against current Florida Building Code requirements for wind-borne debris regions. We can assess the opening before you spend money on a policy change. Call (863) 208-5172 for an honest evaluation.
In most cases, if the frame is intact and structurally sound, we can replace the failed insulated glass unit with a new PGT or equivalent IG unit without touching the frame. But if the frame shows corrosion or the original installation was not anchored to current code, a partial fix may not satisfy an inspector or your insurer. We will tell you which situation you have before quoting anything.
Grit and salt-laden storm winds are the usual culprits in Davie. Dust from open fields works into the roller assemblies, and humidity accelerates corrosion on the tracks. Once rollers wear unevenly, the panel tilts slightly, and that tilt is what makes the door jump or bind. We replace the worn rollers and clean or replace the track so the panel seats squarely again.
Some hardware is still available through supplier channels, and some has been discontinued. When genuine PGT rollers or locking multipoints are no longer manufactured, we source aftermarket equivalents that meet or exceed the original engineering and maintain impact certification. Before any work starts, we will tell you whether you are getting genuine PGT or a matched equivalent.
Yes, PGT offers impact-rated doors in oversized configurations, but these are often custom-engineered rather than stock catalog items. For expert fitting, see our Door Installation in Davie. Davie’s equestrian-zoned properties frequently require widths and heights that push beyond standard rough openings, meaning the project needs careful measurement and a permitted installation to pass Town of Davie inspection. We handle that process from the first measurement to the final sign-off. Call (863) 208-5172 for an exact quote.
Service Areas Near Davie
Our PGT service teams cover Davie and the surrounding communities, including Cooper City, Southwest Ranches, Sunrise, Weston, and Pembroke Pines. We know the housing stock and wind-load requirements in each, so the permit process does not slow your project down. We also handle Davie service area calls from homeowners across the town’s ranch neighborhoods. For PGT work just south of Davie, see our PGT service in Cooper City page. For homes in the equestrian-zoned acreage west of town, we provide PGT service in Southwest Ranches. And if you want to read more about how we approach the brand specifically, visit our PGT sales & service overview.
Book Your PGT Service in Davie Today
If your PGT windows or doors are fogged, binding, corroded, or failing a wind mitigation check anywhere in Davie, call (863) 208-5172. A live person answers, 24 hours a day, seven days a week. We will schedule your free estimate, and on most repair jobs we can complete the work in a single visit. Done right, in writing, the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Davie and Broward County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After