PGT Sliding Glass & Patio Doors Nationwide | TruePane Windows & Doors

PGT Sliding Glass & Patio Doors in Davie: What to Know First

We repair, service, and replace PGT sliding glass and patio doors in Davie as an independent PGT service provider, not a factory rep. Most sliding door rebuilds and roller replacements happen in one visit, and we quote flat before we start so the bill matches the estimate. If you have a PGT door that drags, binds, or lets daylight through a seal, call (863) 208-5172 and you’ll get a live person who can tell you straight whether it’s worth repairing or time to replace.

Call (863) 208-5172

This page is written for PGT owners in Davie who want to know what’s actually wrong with their door, what it costs to fix it right, and whether the warranty still holds. No brochures, no runaround.

How PGT Products Fail - and How We Fix Them

• Roller assemblies on PGT 5500 and 7700 series doors wear flat. Around year ten or twelve, the nylon wheels inside the bottom track carriers grind down, especially in Davie where canal water and humidity keep grit on the tracks. The door stops gliding and starts chewing its own frame. We pull the panel, replace the tandem roller assemblies with OEM-spec or heavy-duty aftermarket carriers, and reset the panel height. Most of the time the frame is still true.
• Soft-lock and multi-point handle sets go out of alignment on PGT SGD550 sliding doors. The hook bolts stop catching the keepers because the door has settled a sixteenth of an inch, or the locking gear stripped inside the handle housing. Symptoms: the handle turns but the door won’t lock, or it locks but the key cylinders won’t align. We don’t just replace the handle; we re-true the panel first so the new hardware isn’t fighting the same sag.
• Weep-hole clogs on PGT WinGuard and Premier patio doors. In Davie’s wet season, those narrow weep slots at the bottom of the frame fill with dirt, leaf paste, and calcified irrigation water. Water backs up, the track channel becomes a trough, and the owner thinks the door leaks. We clear the weeps, flush the internal drainage chambers, and re-slope the track if it has warped. Nine times out of ten the glass and seal are fine.
• Shatter-safe laminated glass delamination at the edges. On older PGT WinGuard impact doors, the PVB interlayer can start to cloud at the bottom corners where standing track water has wicked into the lite. It looks like fog between panes but it’s inside the laminate. That’s a glass replacement, and it’s a two-person job on a sliding panel. We template the lite, order it cut with the correct interlayer spec, and set it dry and square.
• Header deflection on wide PGT 7700 sliders installed without through-bolts. We see this mostly on homes built in the mid-2000s along Flamingo Road and back in Shenandoah. Over a 12-foot opening, the header sags a quarter inch and the fixed panel frame starts pinching the sliding panel. The fix is shimming and through-bolting the header back to level before resetting the door. If you try to fix the roller alone, the door binds again in six months.

Our PGT Sliding Glass & Patio Doors Process

1. 1
   We show up and listen. You call, a person answers. We schedule a time, confirm the day before, and arrive in uniform with the truck stocked for PGT work.
2. 2
   We measure and diagnose, not glance. We check panel plumb, track level, header deflection, roller condition, and seal integrity. Twice, every opening. If it is not right on paper, it will not be right in the wall.
3. 3
   We quote on the spot, on paper. You see the line items: parts, labor, disposal if there’s glass. OEM PGT parts when the warranty or the application demands it, quality aftermarket when the OEM wait time would leave you with a door that doesn’t lock. You decide with full information.
4. 4
   We do the work the same visit in most cases. Rollers, handles, track repairs, seal replacement: done before lunch. A full glass replacement or frame rebuild may take a second visit because of glass fabrication time, but we schedule it before we leave.
5. 5
   We test it with you watching. Open, close, lock, unlock, run a hose on the track if we replaced seals. The door has to slide with two fingers and lock with one turn. If it doesn’t, we’re not done.
6. 6
   We register both warranty layers in writing before we leave the driveway. That’s The Keystone Standard on every PGT job, repair or replacement. The Done Right Promise covers every part and every hour of labor. If something’s off, we come back and make it right. No arguing.

What PGT Sliding Glass & Patio Doors Costs in Davie

The price moves on panel size, glass type (WinGuard laminated versus standard insulated), how far out of level the frame has gone, and whether OEM parts are required. We quote flat, which means the price we put on paper is the price you pay. Call (863) 208-5172 for a free estimate and we’ll measure it right, not over the phone.

Why Davie Homeowners Call TruePane Windows & Doors for PGT Work

We’re a second-generation glazier’s company, locally owned and run by Dale Kessler, a Davie native who grew up off Orange Drive and learned the trade at McFatter Technical College before spending the next twenty-six years measuring and sealing Broward County buildings against Florida weather. TruePane has been serving local communities since 2008 as a family craft, and every PGT job we take on is done to the same standard we’d use on our own mothers’ houses.

We answer the phone with a live person 24 hours a day, every day. Our technicians are background-checked and uniformed, and they know the difference between PGT series and the failure patterns of each one. If a PGT door is truly beyond saving, we’re also authorized installers for CGI, CWS, ES Windows, and ECO Window Systems so we can show you honest side-by-side quotes and let you decide. We stand behind every job with The Keystone Standard and a Done Right Promise, no fine print.

FAQs