Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Roof Repair in Davie: What to Know First
PGT roof repair in Davie usually means one of two things: a skylight or roof-window unit that has lost its seal, or flashing and frame work around a PGT roof-glazed opening that has started leaking during Broward County’s summer downpours. We’re an independent PGT service provider, not a PGT dealer, which means we repair these units without pushing a full replacement when a proper reseal or component swap will hold for years. Most roof-glass repairs on PGT products take a single visit, and we quote the job on paper before any work begins. If you own a Davie home with PGT roof glazing and you’ve noticed water staining on the ceiling below it, call (863) 208-5172. The sooner the leak is stopped, the less it costs you.
How PGT Products Fail - and How We Fix Them
PGT builds a solid product line, but roof-glazed openings in Davie take a beating that ground-level windows never see. Here are the failure patterns we walk into most often, and what we actually do about them:
- Seal failure on PGT Eze-Breeze roof panels. The Eze-Breeze line uses vinyl glazing channels that expand and contract hard under a South Florida sun. The factory seal holds for years, but when it lets go, water travels along the channel and drips at the lowest corner of the frame. We remove the panel, clean the channel properly, and reseal with a marine-grade adhesive rated for constant UV exposure, not the cheaper sealant that fails again in eighteen months.
- Flashing separation around PGT WinGuard roof-adjacent skylights. WinGuard impact units are heavy, and on a Davie roof the thermal movement between the aluminum frame and the shingle or tile surround works the flashing loose over time. We re-seat the flashing, check the underlayment splice, and re-secure with proper lap order so water sheds away from the opening instead of pooling behind it.
- Hail or debris impact on PGT SunGlas panels. SunGlas is a lighter architectural glass PGT uses in roof and covered-patio applications. A direct hit from a falling branch or hurricane-borne debris can crack the outer lite while the inner lite stays intact. We source replacement lites to the original specification and handle the reglaze in place, which saves the frame and the surrounding roof work.
- Condensation between panes in PGT insulated roof glass. When you see fogging inside a PGT roof unit that won’t wipe off, the desiccant in the spacer has failed and the inert gas between the panes is gone. This is a factory-sealed assembly. We replace the glazing unit, not the whole frame, and we register the replacement with the same care we give a full install.
- Frame corrosion at the sill on older PGT aluminum roof frames. In Davie, the morning salt air plus standing water on a low-slope roof will eventually pit aluminum. We grind back the corrosion, treat the surface, and re-anodize on site where the frame is sound, or replace the affected section cleanly when it is not.
Our PGT Roof Repair Process
Dale Kessler grew up off Orange Drive near the old Davie Arena and trained at McFatter Technical College in Davie. He has been setting and sealing glass in Broward County for going on twenty-six years, and the process we run on every PGT roof repair reflects that: no shortcuts, no guesswork, no second trips that should have been one.
- 1
Call and diagnosis. You call (863) 208-5172 and a live person picks up. We ask what you’re seeing, where the water is showing, and what PGT product you have. If you don’t know the model, we’ll figure it out when we arrive.
- 2
Site inspection. Our tech gets on the roof, checks the frame, the flashing, the glass, and the interior ceiling below. We look for the real leak path, not just the wet spot.
- 3
Parts decision on paper. We quote OEM PGT parts where the warranty or the spec requires it, and quality aftermarket parts where it does not. You see both options side by side, with durations in writing, before anything is ordered.
- 4
The repair. We pull the old seal or component, prep the surfaces properly, and install the replacement. If the pane is not true, the job is not done, and we redo it until it is.
- 5
Water test and cleanup. We run water over the repaired area to confirm the fix holds before we leave. Then we clean the glass, the frame, and any debris from the roof.
- 6
The guarantee. Every PGT roof repair is covered by our Done Right Promise. If it isn’t right, we come back and make it right, no paperwork fight, no arguing.
What PGT Roof Repair Costs in Davie
Roof repair on PGT products in Davie runs a wide range because the job depends on what failed and how accessible the unit is. Here are the common scenarios we quote:
- Reseal around a skylight or curb-mounted unit: $275-$550, depending on flashing condition and roof type.
- Replacement of a single insulated glazing unit: $425-$900, depending on size and glass spec.
- Flashing replacement with underlayment repair: $600-$1,400, depending on how far the water has traveled.
- Full frame replacement on a larger PGT roof assembly: $1,500-$4,200, depending on the unit and roof structure.
What moves the price is access: a single-story low-slope roof is faster than a two-story steep pitch, and tile roofs always cost more to work around than shingle. We quote fixed pricing on paper before we start, and the price you approve is the price you pay. Call (863) 208-5172 for a free estimate. We’ll be there when we say.
Why Davie Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been serving local communities since 2008, and that matters in Davie because the homes here were built through several different code cycles and roof designs. A PGT unit on a 1990s ranch in Forest Ridge fails differently than one on a 2015 two-story in Shenandoah, and we know the difference. Our technicians are background-checked, uniformed, and trained to work on more than a dozen manufacturer lines, so if your PGT repair reveals a neighbor unit from CGI, CWS, ES Windows, or ECO Window Systems that also needs attention, we handle it on the same visit. We register both warranty layers in writing before the truck leaves the driveway, and we stand behind the work with our Done Right Promise. If it is not right on paper, it will not be right in the wall.
FAQs
It depends on what the warranty says and whether you’re the original owner. As an independent PGT service provider, we can perform the repair and help you understand what your warranty covers, but we cannot file warranty claims on PGT’s behalf. The Keystone Standard means we put everything in writing so you know exactly where you stand.
Most PGT glass and frame components are available to us within 5 to 10 business days. Common sealants, flashing, and hardware are on the truck. If the leak is active, we can usually stop the water on the first visit and return with the full repair parts when they arrive. Call (863) 208-5172 and we’ll give you a straight answer on timing.
Repair makes sense when the frame is sound and the seal or glazing is the problem. Replace makes sense when the frame is corroded through, the unit has taken a hard impact, or the glass spec has changed under current code. We show you both options on paper with honest numbers, and we don’t push replacement when a repair will hold for a decade or more.
We pull permits when the job requires them under current Davie and Broward County code. A simple reseal typically doesn’t trigger a permit, but any structural flashing replacement or frame work might. We tell you before the job starts, not after, and our work passes inspection the first time.
No. Our quoted price is fixed. If we open the roof and find something we couldn’t see from the outside, we stop work, show you the issue, and re-quote before we proceed. You approve every dollar before it’s spent. Call (863) 208-5172 for a free estimate and a written quote you can hold us to.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.