Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Impact Windows in Davie: What to Know First
PGT impact window repair and installation in Davie typically runs $275-$1,100 for most part replacements and $850-$2,400 for full sash or glass replacement, depending on the series and size of the opening. TruePane Windows & Doors handles PGT impact windows as an independent PGT service provider, which means we diagnose, repair, and replace using the right parts for the job without being tied to a manufacturer’s service queue. Most PGT repairs in Davie are completed in a single visit. If you have a PGT window that’s fogged, binding, or not latching the way it should, call (863) 208-5172 and we’ll sort out what’s actually wrong before quoting a dollar figure.
This page is for Davie homeowners who already own PGT impact windows, or who are adding to an existing PGT installation, and want straight answers about what fails, what it costs, and who in town actually knows the product line. Dale Kessler has been setting and sealing windows in Broward County for going on twenty-six years, and he’s seen more PGT work come through the shop than most folks realize. If it’s a PGT window and it’s not doing what it was built to do, we can tell you why.
How PGT Products Fail - and How We Fix Them
PGT builds a solid impact window, but every manufacturer has patterns. These are the ones we see most often in Davie, where the humidity and afternoon storms do their own kind of stress testing:
- Fogged glass on WinGuard vinyl single-hung units. The seal between the panes breaks down, usually after years of South Florida heat cycling, and moisture finds its way in. The glass is not cracked and the frame is fine, but the insulated unit is dead. We replace the glass with a sealed unit rated for the same design pressure as the original, not a cheaper off-the-shelf panel that happens to fit. That keeps the impact rating honest.
- Binding sashes on PGT sliding glass doors and horizontal rollers. Davie’s sandy soil shifts, and slab movement puts a slight rack on the frame. Homeowners assume the door is warped. Most of the time the rollers have worn, or the track has picked up grit, or the frame has settled just enough to pinch. We rebuild the rolling assembly with quality aftermarket rollers when the OEM part is no longer available, and we align the panel so it rides square. If it is not right on paper, it will not be right in the wall.
- Lock and keeper misalignment on PGT casement and single-hung windows. After years of operation the keeper screws loosen and the sash drops a fraction of an inch. The window will not lock, and on an impact window that’s a real problem, because the lock mechanism is part of the structural load path during a storm. We re-set the sash, replace worn hardware, and make sure the lock engages fully before we call the job done.
- Cloudy glass packs on older PGT aluminum impact windows. Some early PGT aluminum lines used a glazing tape that dries out after a decade of Davie sun. The glass itself is fine, but the seal fails and you get condensation between the panes. We strip the old tape, clean the frame channel, and re-glaze with a modern structural silicone that holds up to the UV exposure we get here.
- Failed gas springs on PGT awning and casement windows. The struts that hold the sash open lose pressure, and the window will not stay up. It’s a simple fix with the right part, but the wrong strut length or force rating will stress the hinge and cause a bigger problem down the line. We match the replacement strut to the sash weight and factory spec, because guessing here costs more later.
Our PGT Impact Windows Process
Every PGT job we handle in Davie follows the same sequence. It’s not complicated, but each step matters:
- 1
The call. A live person answers, 24 hours a day, 7 days a week. You tell us what the window is doing. We ask a few questions about the series, the age, and what you’ve noticed. No voicemail tree, no callback form.
- 2
The diagnostic visit. A background-checked, uniformed technician measures every opening twice and inspects the frame, the glass, the hardware, and the seal. We figure out whether the problem is the window itself or the installation around it. Those are different repairs with different price tags.
- 3
The parts decision. We quote OEM PGT parts when they’re available and they’re the right call. When a part is discontinued or on indefinite backorder from the manufacturer, we quote a quality aftermarket equivalent that matches the spec and we tell you which is which on paper. No surprises after the fact.
- 4
The repair. We do the work in one visit whenever the scope allows. That means the right glass, the right hardware, the right sealant, and a clean job site when we’re through.
- 5
The test. We operate the window multiple times, check the lock engagement, verify the seal, and run water where applicable. If it doesn’t pass our standard, it doesn’t ship.
- 6
The guarantee. Every PGT repair is covered by the Done Right Promise, and both warranty layers are registered in writing before the truck leaves the driveway. If something isn’t right, we fix it. No paperwork fights, no fine print.
What PGT Impact Windows Costs in Davie
Here’s what we see in the Davie market for common PGT scenarios:
- Fogged glass replacement on a WinGuard insulated unit: $375-$850 per window, depending on size and whether the sash needs new glazing tape or sealant.
- Roller and track rebuild on a PGT sliding door: $325-$650, including alignment and testing.
- Lock, keeper, and hardware replacement: $275-$550 per window, depending on the series and what’s worn.
- Full sash replacement (glass plus frame section): $850-$2,400, driven by size, series, and whether the unit was custom-sized.
- Gas spring replacement on awning or casement units: $175-$400 per window.
What moves the price is rarely the part itself. It’s whether the frame is still square, whether the original install left proper drainage, and whether the surrounding caulk and flashing are doing their job. We quote fixed pricing up front, in writing, and the quote is the quote. Call (863) 208-5172 to schedule a free estimate and we’ll give you the real number before any work begins.
Why Davie Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been serving Davie and Broward County since 2008 through a heritage of craft and community commitment. Dale Kessler grew up off Orange Drive near the old Davie Arena, and he still treats every job like the neighbor who hired him will be at the hardware store tomorrow. Our technicians know PGT products because they’ve set enough of them to know what a correct install looks like and what a shortcut looks like. If the job requires a different brand because of availability or budget, we install and service CGI, CWS, ES Windows, and ECO Window Systems as well, and we quote manufacturer lines side by side on paper so you can see the real difference. The Done Right Promise applies to every job we touch, and a live person answers the phone around the clock. We stand behind the work.
FAQs
A proper repair using parts that match the original design pressure rating generally does not void the PGT warranty on the rest of the unit, and we document the repair so there’s a record of what was done and why. We can’t rewrite PGT’s warranty language, but we can do the work correctly and register it in writing, which is exactly what The Keystone Standard calls for. Call (863) 208-5172 if you want an honest read on whether a repair is the right call.
Sometimes yes, sometimes no. It depends on the part and the series. We carry common PGT hardware and keep relationships with regional suppliers, and when OEM parts are backordered we quote a quality aftermarket equivalent instead of making you wait indefinitely. We’ll tell you what’s available before you commit.
If the frame is in good shape and the seal failure is limited to the insulated glass unit, replacing the glass is almost always the right and less expensive call. If the frame has rot, racking, or structural damage, you’re better off replacing the sash or the whole unit so the impact rating isn’t compromised. We’ll tell you which one you actually need.
Most PGT repairs in Davie are completed in a single visit once the diagnosis is done and parts are in hand. We don’t promise same-day on every repair, because some parts are not sitting on a shelf in South Florida, but we do promise to tell you the real timeline when we quote the job.
No. We quote fixed pricing before the job begins, and if we find something that changes the scope, we stop and talk to you before doing anything else. There are no surprise line items on a TruePane bill. It’s a square deal, plain as that.
If your PGT impact windows need attention, call (863) 208-5172 and talk to a live person who knows the product and knows Davie. Estimates are free, and the first conversation will save you time even if we never set foot on the property.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.