Mr-Glass Impact Windows Nationwide | TruePane Windows & Doors

Mr-Glass Impact Windows in Davie: What to Know First

We install, replace, and service Mr-Glass impact windows for homeowners across Davie as an independent Mr-Glass service provider. Most Mr-Glass impact window repairs run between $180 and $620 depending on the hardware, seal, or glazing involved, and full replacement work is quoted in writing before anything gets ordered. We are not affiliated with Mr-Glass and do not claim to be, but we have pulled enough of their sashes apart over the years to know exactly where the good engineering ends and the Florida humidity begins.

Call (863) 208-5172

If you own Mr-Glass impact windows in Davie and something is not closing right, fogging up, or leaking at the frame, this page tells you what is actually going on and what it takes to fix it. Call (863) 208-5172 and a person answers. That is not a salesman reading a script, it is someone who can tell you whether the job is worth a service call or not.

How Mr-Glass Products Fail - and How We Fix Them

Every window line has its own habits. Mr-Glass impact windows are no exception. Here is what we see most often in Davie homes, model by model.

• Seized interlock hardware on Mr-Glass horizontal rollers. The interlock pins on certain Mr-Glass sliding impact units are steel running against aluminum, and with Davie’s salt air and summer humidity that pairing corrodes faster than the brochure suggests. The symptom is a window that used to open with one hand and now takes two, or an interlock that will not seat at all. We replace the pins with corrosion-resistant aftermarket hardware where the OEM part is no longer made, or swap the rail if the corrosion got into the pocket.
• Fogged double-pane impact glass on fixed picture units. Mr-Glass picture windows from the mid-2000s used a desiccant-loaded spacer that, once saturated, cannot be revived. The window is not broken, the seal is done. The fix is a new insulating glass unit, and the question is always whether the frame is worth reglazing or whether replacement makes more sense. We will tell you which one we would pick if it were our house, and quote both ways on paper.
• Damaged gaskets on Mr-Glass casement and awning impact windows. The wedge gaskets along the sash perimeter dry out and shrink after a dozen years of Davie heat, and once they pull back from the corner welds the window loses its air seal. Water does not always show up indoors, which is the dangerous part. If you can slide a dollar bill through the closed sash, the gasket is not doing its job. We replace gaskets by the lineal foot, not by guess, and reset the sash so the lock pulls the gasket snug again.
• Stripped lock keepers on Mr-Glass single-hung impact windows. The locks themselves hold up fine. The problem is the keeper screwed into the vinyl frame with a shallow thread, which strips after years of the window being latched hard against slight frame shift. The lock still turns, so the window looks fine, but it is not actually secured against a storm. We through-bolt the keeper with a metal backer plate inside the frame channel, which ends the cycle permanently.
• Failed glazing on Mr-Glass impact doors with welded corner blocks. The bottom corner welds on some Mr-Glass door sashes hold water longer than they should because the weep system is small and Davie downpours come hard. Once the weld starts to split, the impact door loses its structural rating even though the glass is still intact. We inspect the corners on every Mr-Glass door service call, and if the weld is compromised we replace the sash rather than patch it. Patching a split corner on a rated impact door is not something we will do.

Our Mr-Glass Impact Windows Process

Here is how a Mr-Glass job goes from the first call to the last wipe-down.

1. 1
   We listen, then schedule. You tell us what the window is doing. We set a day and a time, and we will be there when we say.
2. 2
   We measure every opening twice. Before any part is ordered, our technician checks the frame dimensions, the reveal, the plumb, and the existing hardware with the window in place. If you have a Mr-Glass sticker or label in the frame channel, we record the series and the date code.
3. 3
   We give you a written line-item quote. OEM parts versus quality aftermarket, shown side by side on paper. You see the prices, the part numbers, and what each option gets you before anything is ordered.
4. 4
   We do the work in one visit. Most Mr-Glass impact window repairs and replacements are completed the same day. No second appointment left hanging, no open-ended schedule.
5. 5
   We test the window in front of you. The interlock seats, the lock throws, the gasket pulls a clean seal, and if the job involved impact glass, we confirm the frame corners are sound before we call it done.
6. 6
   We register the warranty before leaving the driveway. Both manufacturer layers in writing, durations stated. That is The Keystone Standard. Not a verbal promise, paperwork in your hand.

What Mr-Glass Impact Windows Cost in Davie

Prices below are what we see in Davie and the surrounding Broward County market. Every job is quoted in writing after a measurement, not before, but these ranges will tell you what to expect.

What moves the price is the series you own, whether the part is still in production, and whether the frame is still square after years of Davie heat. Call (863) 208-5172 for a free estimate. The number on the paper is the number on the bill. That is a square deal.

Why Davie Homeowners Call TruePane Windows & Doors for Mr-Glass Work

Dale Kessler grew up off Orange Drive, learned the trade at McFatter Technical College in Davie, and has been setting windows in Broward County for going on twenty-six years. That matters when the product in your hand is a Mr-Glass window that Mr-Glass themselves no longer supports the way they used to. We know how those units were built, and we know what has changed.

Every job carries the Done Right Promise: if it is not done right, we make it right, no paperwork fights. We are also an authorized installer for over a dozen other manufacturer lines including PGT, CGI, CWS, and ES Windows, so when a Mr-Glass repair does not make financial sense, we can show you the alternatives side by side. If the pane is not true, the job is not done. That has been the rule since the beginning.

FAQs