Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterWhy Davie Homeowners Choose ES Windows Windows & Doors
We provide ES Windows Windows & Doors in Davie, FL service, from Series 7000 sliding door roller replacement to full impact-rated window retrofits on 1970s ranch homes. Our technicians have worked on ES Windows aluminum and impact-rated products across South Florida for over a decade, which means we know the extrusion profiles, corner joinery, and Miami-Dade compliant hardware on these units without being constrained by manufacturer authorization. If you own ES Windows products and need straight answers about repair versus replacement, call us at (863) 208-5172.
Why Trust TruePane Windows & Doors for Your ES Windows Windows & Doors?
We are not an authorized ES Windows dealer, and we will not pretend otherwise. What we are is an independent ES Windows service provider with technicians who have spent years diagnosing the specific ways these units fail in South Florida. Series 7000 sliding doors that bind after sandy soil works into the track. Series 6000 casement windows with corner gaskets that give out after enough afternoon thunderstorms. Series 4000 hung windows where the balance shoes fatigue and the sash will not stay up. These are not hypotheticals. These are the calls we take every month.
Dale Kessler, our owner, grew up off Orange Drive near the old Davie Arena and learned the trade at McFatter Technical College in Davie. He has been measuring, setting, and sealing windows and doors in Broward County for going on twenty-six years. The rule he keeps on the whiteboard applies to every ES Windows job we take: if the pane is not true, the job is not done.
When we work on your ES Windows units, we register both warranty layers in writing and state the durations before the truck leaves your driveway. That is our Keystone Standard, and it applies whether the job is a maintenance check or a whole-house impact window replacement. If the work is not done right, our Done Right Promise means we make it right. No paperwork fights. No arguing.
Common ES Windows Windows & Doors Problems We Fix in Davie
- Sticking or derailed Series 7000 sliding glass doors. Fine sandy soil from Davie yards and equestrian properties infiltrates the bottom track over time. The stainless-steel rollers flatten against the grit, the door drags, and eventually the panel jumps the track. We pull the panel, clean the track channel properly, replace the rollers with correctly rated units, and realign the interlock. Most Series 7000 doors we see in Davie need this service by the ten-year mark.
- Air and water intrusion on Series 6000 impact casement windows. The corner seals and gaskets on these units degrade under Broward County humidity and intermittent salt-laden storm winds. A window that looks fine from the living room may be letting water into the frame cavity during a summer downpour. We replace the corner seals, check the sash alignment against the frame, and verify the locking points engage fully.
- Hard-to-lift sashes on Series 4000 single and double hung windows. The balance shoes and springs inside the jamb liners wear out, especially in original units from the 1990s and early 2000s. A sash that slams shut or will not stay open is usually a balance shoe failure, not a broken window. We replace the shoes and springs in pairs, which keeps the sash travel even.
- Fogging between panes on early ES storm-rated units. Impact glass delamination or edge seal failure shows up on older ES units that have faced years of intense UV exposure and salt air. Once the seal fails, the insulating gas escapes and moisture gets between the panes. This cannot be cleaned or resealed. The glass unit needs replacement, and in some cases, the full sash or frame is the more honest call.
- Corrosion on uncoated aluminum frames. Davie’s high summer humidity accelerates galvanic corrosion on older aluminum extrusion, especially where the frame contacts stucco or concrete block. We see this most often on original ES Florida product installs from the pre-2005 era. If the corrosion is surface-level, we clean and re-coat. If it has compromised the extrusion, we will tell you plainly that replacement is the right move.
ES Windows Parts & Our Repair-vs-Replace Approach
We use genuine ES Windows hardware when it is available through independent supply channels. That includes rollers, balance shoes, locking mechanisms, and interlock weatherstripping for the Series 4000, 5000, 6000, and 7000 lines. When a part is discontinued or on a long delivery timeline, we source quality aftermarket components only after verifying fitment and Miami-Dade code compliance. We will not put a part on your window that compromises the impact rating.
Here is how we approach repair versus replacement, and we apply this to every ES Windows unit we touch in Davie. If the frame extrusion is sound, the glass is intact, and the hardware has failed, we repair. That is the straightforward call. If the frame is corroded through, the impact glazing has delaminated, or the cost to repair is within a few hundred dollars of a new unit, we recommend replacement. We will show you the numbers on paper, side by side, and let you decide. If it is not right on paper, it will not be right in the wall. Call (863) 208-5172 for an honest assessment.
Our ES Windows Service Process - Step by Step
- 1
Diagnosis on site. We measure the opening, check the frame for square and level, and identify the specific ES Windows failure mode. For Series 7000 doors, we check roller condition and track wear. For Series 6000 casements, we inspect corner seals and locking points. For Series 4000 hung windows, we check balance shoes and spring tension. You get a written diagnosis before any work begins.
- 2
Repair or replacement, quoted in writing. We price the job two ways when it is a real choice: repair with the parts we recommend, and replacement with a comparable ES Windows or alternative manufacturer line. You see both numbers on paper. No pressure, no same-day pitch.
- 3
The work itself. For repairs, we clean, replace, adjust, and lubricate using the correct hardware. For replacements, we pull the old unit, correct any opening issues, set the new ES Windows product level and square, and seal it properly against Broward County wind and water requirements. We measure everything twice.
- 4
Testing and documentation. We cycle the window or door through its full range, check sealing, verify the locking points, and confirm the unit operates the way it should. Then we register both manufacturer warranty layers in writing before the truck leaves your driveway. That is the Keystone Standard.
A homeowner in Davie called us about an ES Windows Series 7000 impact sliding door that was nearly impossible to open after a heavy storm season. Our tech found the stainless-steel rollers had flattened against the track because of fine sediment buildup, and the interlock weatherstripping was torn. We cleaned the track, installed new rollers and a proper interlock seal, and realigned the door so it glides and seals tightly again. No frame replacement needed.
ES Windows Products We Service & Install in Davie
We service and install the full ES Windows residential product range. That includes the Series 6000 Impact Casement, Series 5000 Fixed and Picture windows, Series 4000 Single and Double Hung windows, and the Series 7000 Sliding Glass Door. Our Window Installation focus areas for Davie homeowners are hurricane impact windows, impact sliding glass doors, and wind mitigation and code compliance work. We keep common ES Windows hardware in local stock for faster turnaround: rollers for Series 7000 doors, balance shoes for Series 4000 hung windows, and locking components for Series 6000 casements.
We Also Service These Brands
While ES Windows is a brand we know deeply, we are not tied to a single manufacturer. We service and install Andersen, Pella, and PGT products as well, and we carry parts for all of them. That matters when a replacement makes more sense than a repair and you want options across manufacturers, quoted side by side on paper.
FAQs - ES Windows Windows & Doors Service in Davie
Yes. We are an independent ES Windows service provider, and we work on these units every week across Davie. Being independent means we are not restricted to manufacturer-mandated procedures or parts channels. We source genuine ES Windows hardware through independent supply channels and recommend what is actually best for your unit, not what a dealership agreement tells us to sell.
That rattle is almost always a worn corner gasket or a locking point that has drifted out of alignment, not a broken window. In Davie’s climate, the corner seals on Series 6000 casements harden and shrink after years of heat and humidity. When the sash no longer seats tightly against the frame, it moves in the wind. We replace the gaskets and adjust the locking points so the sash compresses fully against the weatherstripping. Call (863) 208-5172 to have it checked.
We do. We keep replacement rollers for Series 7000 sliding glass doors in local stock because we see this failure often enough in Davie that it makes sense to have the parts on hand. Sandy soil and fine sediment from the town’s equestrian properties work into the bottom track and destroy rollers faster than you would expect. We can usually rebuild a Series 7000 door in a single visit.
No, and we will not sell you a service that pretends otherwise. Once the edge seal on an impact-rated glass unit fails, the insulating gas escapes and moisture enters the space between the panes. The glass unit itself must be replaced. Depending on the age and condition of your frame and hardware, full sash or full window replacement may be the more cost-effective route. Call (863) 208-5172 for a written quote and we will lay out both options.
We prepare ES Windows openings for wind mitigation inspection by verifying the impact rating documentation, checking that every opening is properly labeled and fastened, and confirming the installation meets Broward County wind-borne debris requirements. Davie enforces these requirements on every permitted replacement opening, and insurers are increasingly conditioning renewals on impact-rated or shutter-protected openings. We make sure your ES Windows units pass the inspection the first time. Estimates are free.
ES Windows service in Davie varies by scope. A single Series 7000 door roller replacement typically runs $180 to $340. Balance shoe replacement on a Series 4000 hung window is usually in the $120 to $250 range per window. Fogged impact glass replacement starts around $400 per unit and goes up depending on size and glass rating. Full frame replacements run substantially higher. Call (863) 208-5172 for an exact quote. Estimates are free.
Book Your ES Windows Service in Davie, FL
If you own ES Windows products in Davie and something is not working right, call (863) 208-5172. A live person answers. We will schedule a visit, diagnose the problem honestly, and give you a written quote before any work begins. No surprises on the bill. No second appointment left hanging.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Davie since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.