Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Roof Repair in Davie: What to Know First
ES Windows roof repair in Davie means fixing the seal failure, frame warp, or flashing issue where an ES Windows unit meets the roofline, and we do that work as an independent ES Windows service provider, not a manufacturer rep. Most ES Windows roof-adjacent repairs run between $280 and $850 depending on whether we’re refitting a skylight curb, replacing a rotted sill, or pulling and resetting a window that’s let water run inside the wall. We’re TruePane Windows & Doors, we’ve worked on ES Windows units in Broward County for years, and the phone is answered by a person around the clock at (863) 208-5172.
This page is for Davie homeowners who’ve got an ES Windows product at or near the roofline and noticed a soft spot in the drywall below it, a damp corner after a heavy rain, or a window that no longer wants to close square. If that sounds familiar, keep reading.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid product, but no window made in Florida is immune to what a wet season plus a hot attic does to a roofline opening. We see the same five failure patterns year after year in Davie homes, and knowing which one you’re looking at saves you money before we ever climb a ladder.
- Skylight curb seal breakdown on ES Windows skylight units. The curb-mounted skylights fail where the aluminum frame meets the roof curb, because the original butyl seal hardens under a Davie summer and the thermal movement works the joint loose. Homeowners see condensation between the panes first, then a drip. We pull the unit, clean and re-bed the curb with a polyurethane sealant rated for 140°F, and re-flash the curb sides. The real cause is often not the skylight at all; it’s the roofer’s flashing that never got lapped correctly.
- Top-hinged awning windows with failed upper gaskets. On ES Windows awning units mounted high on a wall or into a roof dormer, the top gasket takes beating sun and shrinks over time. The symptom is a hairline drip that only shows during a driving rain, usually on the leeward side of the house. The fix is the correct durometer replacement gasket, set into a cleaned channel, not a bead of silicone over the old one like a handyman with a tube and a deadline would do. That silicone works for about one season.
- ES Windows fixed structural glass with failed weep cover clips. Fixed glass units at roof lines rely on weep systems to drain water that gets behind the face caps, but the small plastic cover clips at the roofline get brittle after eight to ten years of South Florida sun and snap. Once they break, the face cap lifts at the corner, and water sneaks behind the flashing. We replace the entire clip set on a service call, because patching one means coming back for the next one in six months.
- Roof-adjacent casement sashes with worn friction stays. Casement units mounted into roof dormers carry more wind load than windows mid-wall, and the friction stays wear faster. A homeowner notices the window will not hold open, or it drops an eighth of an inch when they let go. On the repair side, the original ES Windows hardware is sometimes no longer made, and we’ll tell you that up front. We use a stainless aftermarket stay where factory is unavailable, and we’ll state that in writing before you pay a penny.
- Frame rot at the roofline corner, found on ES Windows radius-top windows. The radius-top ES Windows units installed in gable peaks are beautiful, but their corners are where roof runoff from a missing kickout flashing concentrated for twenty years. The lower right corner of the frame is soft to the touch, and the window is no longer sitting square. This one usually requires pulling the unit, addressing the rotted structural wood, re-flashing the opening with proper head flashing above the radius, and resetting the window. It’s the most expensive of the five, and it’s the one most often misdiagnosed as ‘just recaulk it.’
Our ES Windows Roof Repair Process
- 1
We look at it before we price it. On the phone we’ll pull up your address and the ES Windows model style you’re describing, and we’ll give you a straight cost range based on what we’ve repaired in Davie on that same product. But we won’t quote a final number over the phone. We need to put our hands on the frame, the flashing, and the roof line to know what we’re actually dealing with.
- 2
We diagnose the leak source, not the symptom. Most roof repair companies caulk the visible spot and send an invoice. We start from the roofline and work down: flashing, counterflashing, weep system, gaskets, glass. Water travels, and the damp mark on your ceiling is not necessarily where it’s coming in.
- 3
We make the parts decision out in the open. If the original ES Windows component is still made and spec’d right, we use it. If it’s been discontinued, we say so and quote a comparable aftermarket part we’ve used before on ES Windows jobs. You get the choice and the price difference on paper, not in a surprise line item.
- 4
The repair itself. We clean the work area, remove the failed component, prep the surfaces, and set the new part with the correct sealant, fastener, or flashing. The truck carries the right materials for Florida rooflines, because a sealant that works in Ohio does not work in Davie in August.
- 5
The water test. We run water over the repaired area for a solid fifteen minutes before we call it good, and we ask you to watch with us. If the pane is not true, the job is not done. It’s right in our name.
- 6
Cleanup and warranty registration. We leave the roof line cleaner than we found it, and we put both manufacturer warranty layers and our Done Right Promise in writing before we leave the driveway.
What ES Windows Roof Repair Costs in Davie
We quote from real job history, not from a national pricing chart, so here’s what we’ve charged Davie homeowners for ES Windows roof-related repairs over the past several years. Every house is different, but these numbers reflect what you should expect to see from any honest shop in this area.
| Repair Scenario | Typical Range |
|---|---|
| Skylight curb reseal and re-flash (ES Windows curb-mounted unit) | $380 - $620 |
| Awning window upper gasket replacement | $280 - $420 |
| Weep cover clip set replacement (fixed glass at roofline) | $240 - $360 |
| Casement friction stay replacement (one sash) | $310 - $480 |
| Radius-top window pull, rot repair, re-flash, and reset | $1,100 - $2,400 |
What moves the price on a Davie ES Windows job: whether we need scaffolding or a tall ladder setup, whether the roof pitch is steep enough to slow us down, whether the original part is still manufactured, and whether the surrounding wood is solid or gone. We’ll write all of it down before we start. Call (863) 208-5172 for a free estimate.
Why Davie Homeowners Call TruePane Windows & Doors for ES Windows Work
Because we’ll be here in thirty years, and the phone is answered by a person at 3 a.m. if a roofline window lets go during a storm. Because the technician who walks your roof has been trained on multi-brand window and door systems, including ES Windows, and has also worked on PGT, CGI, CWS, and ECO Window Systems units right here in Davie, which means he can tell you honestly when an ES Windows part is worth keeping and when something else will last longer. Because we register both manufacturer warranty layers in writing and stand behind our own work for 90 days with no paperwork fight. We’re not the cheapest bid in town, and we’re not trying to be. We’re the call a homeowner makes when the first repair failed and they need it done right.
FAQs
No. We are an independent ES Windows service provider, not an authorized dealer, and using third-party repair service does not void a product warranty so long as the repair does not damage the unit’s original structure or function. We document every repair with photos and a written description of the work, so if a warranty claim arises later, you have the record.
Some are, some are not. ES Windows gaskets, many hardware sets, and certain hinge components are still made. Some radius-top frame components and old friction stay hardware have been out of production for years, so we’ll quote a quality aftermarket part that matches the function. We’ll tell you before any work starts whether the part is OEM or aftermarket, and the price difference. Call (863) 208-5172 and we’ll check the parts list for your specific model.
If the glass is clear, the frame is not rotted, and the failure is a gasket, seal, or hardware issue, repair is almost always the right money call in Davie. If the frame itself is soft in a corner, or the glass seal has failed and the unit is at the roofline where water damage is already happening, replacement may be the honest answer. We’ll tell you which way the numbers point, because we’d rather sell you a repair than a window you didn’t need, and the trust is worth more than the invoice.
We keep service slots open for water-intrusion calls, because a roof leak at a window does not wait politely. A live person answers the phone at (863) 208-5172 any time of day or night, and we’ll get you scheduled on a visit promptly, typically within one to three days depending on how many calls are already in front of us that week. If you’ve got water coming in, we’ll tell you how to protect the interior until we get there and we’ll answer the phone when you call.
Not unless we both find something hidden and agree to it in writing before we touch it. The number we quote is the number on the bill. If we open the wall and find the header is gone from twenty years of a slow leak, we’ll stop, show you what we found, and give you a written change before going further. No surprise line items, no ‘while we’re here’ add-ons. That’s a square deal.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.