Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Impact Windows & Doors in Davie: What to Know First
We provide independent CWS impact windows & doors service and repair throughout Davie, and most jobs are quoted within 48 hours with the work scheduled the same week. We are not a CWS dealer and we do not sell new CWS product lines, but we repair and service them every month, and we charge a fair hourly rate with everything on paper before the first screw comes out. If your CWS windows or doors are binding, leaking, or not latching square, call (863) 208-5172 and we will tell you honestly whether it is worth repairing or replacing.
This page is for Davie homeowners who own CWS impact windows, impact sliding glass doors, or impact French doors and want them working the way they did the year they were installed. Dale Kessler and our technicians have been setting and sealing impact glass in Broward County for over two decades, and we know which CWS components fail first and why.
How CWS Products Fail - and How We Fix Them
CWS impact windows and doors are built to a real Miami-Dade standard, but no brand is immune to the humidity, salt air, and afternoon heat that Davie brings every July. Here are the failure patterns we see most often on CWS units in this area, and what we do about them.
- CWS Series 600 impact casement windows: crank operator gear binding. The zinc gear inside the operator wears down after a decade of Florida open-close cycles, and the window starts needing two hands to crank. The symptom is a gritty, skipping feel right before the sash seats. We replace the operator with either the OEM CWS operator or a heavier aftermarket unit when the original was under-spec for the sash weight. The fix is usually a one-visit job.
- CWS impact sliding glass doors: roller failure on the non-drainage side. Davie’s summer rain pattern means the track on the bedroom-side sliders is almost always damp. CWS tracks drain well, but the roller housings on the non-drainage side collect silt and eventually seize. The door gets hard to move, then starts popping off the track. We pull the panel, clean the track channel, replace the rollers, and re-square the panel to the jamb.
- CWS fixed impact windows: glazing bead shrinkage and seal gapping. The vinyl glazing bead around the glass edge can shrink in direct afternoon sun, especially on west-facing walls in western Davie subdivisions. The bead pulls back a quarter-inch and the seal starts to go brittle. We replace the bead and re-seal the unit with a marine-grade sealant rather than a generic silicone that will fail in two seasons.
- CWS impact French doors: astragal misalignment on double-door units. The astragal on the inactive door drifts over time from daily traffic and thermal movement. The active door starts dragging on the top pin, and eventually the lock set stops aligning with the strike plate. We re-shim the inactive panel and realign the astragal so the doors close and latch with one hand. This is a two-person adjustment, not a part replacement, unless the astragal has been walked on.
- CWS impact garage door panels: panel delamination on older impact rated panels. South-facing CWS impact garage door panels absorb all of Davie’s afternoon sun, and we have seen older panels delaminate where the glazing meets the end stiles. The panel face starts to bow outward. We inspect the panel construction, and where the frame is still sound we re-secure and re-seal. Where the delamination has gone too far, we pull the panel measurements and quote a replacement before the Florida Building Code inspection becomes an issue.
Our CWS Impact Windows & Doors Process
Every CWS job follows the same order of work, whether it is a sticky slider or a broken crank operator. There is no shortcut in the process because a skipped step is how windows end up out of true.
- 1
Call and describe the issue. You reach a live person at (863) 208-5172, not a voicemail tree. We ask what the window or door is doing, how long it has been doing it, and which side of the house it faces.
- 2
We diagnose on site. A uniformed technician measures the opening twice, checks the reveal on both sides, and confirms exactly which CWS component has failed before quoting anything.
- 3
Parts decision on paper. We price the OEM CWS part and a quality aftermarket alternative side by side, with the warranty duration for each written down. You pick what makes sense for your house and your budget.
- 4
The repair or replacement. We do the work in one visit whenever the parts allow, clean the window or door track, and re-set the unit square to the opening.
- 5
We test it in front of you. The window cycles, the door slides, the lock latches. If you are not satisfied with how it operates, we are not done.
- 6
We write it down. Both warranty layers are registered in writing before the truck leaves the driveway, and the Done Right Promise stands behind the workmanship.
What CWS Impact Windows & Doors Costs in Davie
The honest answer is that it depends on the part and the labor, and we do not know your exact price until we see the unit. The good news is that most CWS impact window and door repairs in Davie fall into a predictable range, and we put it all in writing before we start.
- Crank operator replacement on a CWS casement window: $160-$280 installed
- Roller replacement on a CWS sliding glass door: $190-$350 installed
- French door astragal realignment and shimming: $180-$320
- Full sash re-seal on a fixed CWS impact window: $140-$240 per opening
- Impact garage door panel replacement: quoted per panel and finish
What moves the price is access, condition of the frame, and whether you want the OEM part or a quality aftermarket option. We do not quote a low number and then discover a “surprise” on the bill. Call (863) 208-5172 for a free estimate, and you will get a line-item quote you can read while we are standing there.
Why Davie Homeowners Call TruePane Windows & Doors for CWS Work
We have been serving Broward County for going on twenty-six years, and we treat a window repair the way a cabinetmaker treats a drawer: the square and the reveal matter. Every CWS job is backed by the Done Right Promise, and if something is not right, we make it right without arguing about paperwork. Dale Kessler grew up off Orange Drive near the old Davie Arena and apprenticed on job sites around this town, so we know what Davie weather does to window frames and door tracks. We are also an independent CWS service provider, which means we tell you when a CWS part is worth paying for and when a better aftermarket option exists. And when a CWS unit is beyond saving, we can quote replacement windows and doors from manufacturers we trust, including Andersen, Pella, and PGT. The Keystone Standard applies on every job: both warranty layers registered in writing before the truck leaves the driveway.
FAQs
We are an independent CWS service provider. We repair and service CWS impact windows and doors, but we are not authorized by CWS to sell new CWS product lines. When a new CWS unit is what the house needs, we can help you find a CWS dealer and give you the measurements and specifications to make the purchase an informed one.
On older CWS units where the original manufacturer warranty has already expired, aftermarket parts carry no risk to the warranty and often cost less than OEM. On newer units still under warranty, we check the warranty language before we quote any part. Our rule is simple: we write down which parts are OEM and which are aftermarket, and the warranty terms for each, so you make the call with the facts. If the pane is not right on paper, it will not be right in the wall.
Most CWS repairs are done in a single visit, and we schedule most Davie jobs within a week of the first call. Parts availability is the one variable that can stretch the timeline, particularly for older CWS series where the OEM component has been discontinued. When that happens, we quote a quality aftermarket alternative the same day and let you decide the timeline. Call (863) 208-5172 and we will give you an honest idea of what to expect.
If the frame is square, the glass is intact, and the failure is in the hardware or the seal, repair almost always makes sense. If the frame has moved, the glass is fogged, or the unit is more than about fifteen years old and showing multiple failure points, replacement starts to look like the better long-term play. We will tell you which one we would choose if it were our house, and we will show you replacement options from Andersen, Pella, and PGT side by side on paper.
Yes. Every repair we perform carries the Done Right Promise. If the work is not done right, we make it right, no paperwork, no arguing. Both warranty layers are registered in writing before the truck leaves the driveway, so there is never a question about what is covered and for how long.
Call (863) 208-5172 today for a free estimate on your CWS impact windows or doors in Davie. We will answer the phone, schedule the visit, and give you a written quote you can read before any work begins.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.