Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Impact Windows & Doors in Davie: What to Know First
We repair and replace CGI impact windows and doors across Davie as an independent CGI service provider. Most diagnostics run the same week you call, and most repairs finish inside a single visit. Pricing runs honest and itemized on paper before any work starts, so you know the number going in and the number going out. If you own a CGI window or door that’s binding, fogging, rattling, or failing a wind-mitigation inspection, call us at (863) 208-5172 and we’ll send a technician who has actually worked on CGI product more than once. This page is written for the homeowner who wants to understand what’s wrong before anyone touches a frame.
Key Takeaways:
- We service and install CGI impact windows and doors in Davie, independent of the manufacturer.
- CGI failures we see most often in Broward County are not random; they follow the climate and the install.
- We use OEM parts where they matter, honest aftermarket where they don’t, and we tell you which is which.
- Every job carries the Done Right Promise and both warranty layers registered in writing before we leave.
How CGI Products Fail - and How We Fix Them
CGI builds a solid product line, but in Davie’s heat and humidity, certain failures show up on a schedule. Here’s what we see in homes from Forest Ridge to Shenandoah, and what we do about it.
- Fogging and seal failure on CGI Estate and Sentry series picture windows. The insulating glass unit loses its seal after years of direct sun on the south and west exposures that dominate so many Davie lots. The sealant breaks down, moisture creeps in between the panes, and you get that permanent haze no cleaner touches. We measure the opening, order a matching IGU, and set it square so the new unit isn’t fighting the frame from day one.
- Binding sashes on CGI Tribute series single-hung and casement windows. Aluminum frames expand and contract with the heat. If the original install wasn’t perfectly plumb, the sash starts grabbing in July and eases up in January. The frame isn’t bad; it was set wrong. We pull the sash, shim the frame true, and reset the hardware so it operates with one hand year-round.
- Roller and track wear on CGI sliding glass doors. Davie’s sandy soil and fine dust work their way into the bottom track. We see Sentry and Estate sliders that a hundred-pound teenager can no longer move because the rollers have ground flat and the track’s loaded with grit. We replace the rollers with heavy-duty stainless, clean and align the track, and the door glides like it should.
- Weatherstripping and gasket compression on older CGI entry doors. Heat and humidity flatten door gaskets over time. The door still locks, but air and rain find their way past the frame. A surprising number of “door frame leaks” on Davie homes are just worn weatherstripping and a threshold that’s drifted. We re-hang the door, replace the seals, and test with water. If it still leaks, we tell you where and why, in writing.
- Hardware fatigue on CGI French doors and multi-point locks. We see throw bars and multi-point gearboxes that strip after ten or fifteen years of South Florida salt air. The homeowner thinks the whole door’s shot. Usually it’s a hundred-dollar gearbox and an afternoon of work. We will not sell you a $4,000 door replacement when a $300 hardware repair restores the door’s function and impact rating.
Our CGI Impact Windows & Doors Process
Here’s how a CGI job runs when you call us, from first call to final cleanup.
- 1
Call and talk to a live person. You reach us at (863) 208-5172. No voicemail tree. We ask what the window or door is doing, how long it’s been doing it, and whether it’s a repeat problem or a new one.
- 2
On-site diagnostic. A background-checked, uniformed technician shows up when we say. We measure every opening twice, check the frame for true, and watch how the window or door operates under real use.
- 3
Parts decision and written line-item quote. We tell you on paper which parts should be OEM CGI for warranty safety and which can honestly be quality aftermarket without compromising the job. You see both numbers. No surprise line items later.
- 4
The repair or replacement. We set the new panes, rollers, hardware, or full unit square and true. If the issue traces back to a bad original install, we correct that too, not just bandage the symptom.
- 5
Water test, cycle test, and wind-mitigation check where it applies. We run water over the opening and cycle the window or door repeatedly to confirm it’s right under actual stress, not just sitting pretty in the frame.
- 6
Warranty registration and Done Right Promise. We register both warranty layers in writing before the truck leaves the driveway. If it is not done right, we make it right. No paperwork fights, no arguing.
What CGI Impact Windows & Doors Costs in Davie
Small repairs run less than you’d expect. Full replacements cost what they cost, and we’ll show you the line items. Here’s what Davie homeowners typically see for common CGI work.
- Hardware repair, single window or door (rollers, gearbox, lock assembly): $180-$425
- Single-pane IGU replacement, CGI Sentry or Estate picture window: $390-$650
- Weatherstripping, threshold re-set, and gasket replacement on one entry door: $160-$310
- Full window replacement, per opening, impact-rated CGI with install: $1,200-$2,800 depending on size, series, and frame condition
- Full sliding glass door replacement, CGI impact-rated: $3,500-$6,800
What moves the number is the size of the opening, the condition of the existing frame, whether the original install was plumb, and the specific CGI series you’re matching. We quote both OEM and quality aftermarket parts side by side so you decide with facts, not a sales pitch. Call (863) 208-5172 for an exact quote. Estimates are free.
Why Davie Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler grew up off Orange Drive near the old Davie Arena, trained at McFatter Technical College right here in Davie, and has been setting windows and doors in Broward County for going on twenty-six years. When a previous install fails its first serious storm, he tends to be the person neighbors call. Our techs are background-checked and uniformed, and they measure every opening twice because the original install being out of true is the root cause of too many “product failures” we get called out to fix. We carry more than a dozen manufacturer lines, so if CGI isn’t the right answer for your home anymore, we can show you Andersen, Pella, or PGT on paper, side by side, with the numbers. And every job leaves with both warranty layers registered in writing and our Done Right Promise behind it. If the pane is not true, the job is not done.
FAQs
No, not when the repair is done with properly matched parts and the work is documented. As an independent CGI service provider, we take care to specify OEM components where the warranty matters, and we register the work and both warranty layers in writing so nothing is left to memory. Call (863) 208-5172 if you want to know specifically whether your repair would use OEM or aftermarket parts and why.
Most single-window or single-door repairs finish the same day. If we’re ordering an IGU to match your existing glass, the lead time is usually three to ten days depending on the lamination and Low-E coating. We’ll tell you the date before we order, not after.
If the frame is square, the glass is intact, and the operator’s still good, replacing just the IGU generally costs a third or less of a full window replacement and restores the window’s energy and impact performance. If the frame’s been out of true since install or the sash is structurally compromised, replacement saves you money over chasing repeat repairs. We’ll show you both numbers on paper and let the math make the case.
For most CGI series we see in Davie homes, including Sentry, Estate, and Tribute, OEM rollers, locks, and weatherstripping are available. When a specific part has been discontinued, we’ll tell you that plainly and present an honest aftermarket alternative that we’ve tested and trust, rather than pretending we can source what the manufacturer no longer makes.
Yes. We know what the Broward County inspectors look for on impact windows and doors, and we’ll check the installation against current wind-mitigation requirements while we’re there. If the product’s sound, we’ll say so. If something would not pass, we’ll show you what’s flagged and what it takes to correct it. Call (863) 208-5172 to schedule an honest look at your openings.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.