Andersen Window Replacement Nationwide | TruePane Windows & Doors

Andersen Window Replacement: The Davie Owner’s Guide

If your Andersen window has a failed sash, fogged glass, a worn balance, or broken hardware, we stock and install replacement parts and full sash replacements for most Andersen lines, with typical installed costs in Davie running $140 to $520 per window depending on the part and series. Most single-sash or hardware jobs are completed in one visit because our trucks carry the common Andersen balances, weatherstripping, rollers, locks, and insulated glass units for 200 and 400 Series windows. The way most owners discover a part has failed is quiet: a window that suddenly drops when opened, condensation that will not wipe off, or a crank that spins without moving the sash.

Call (863) 208-5172

We are an independent installer and service provider, not an Andersen factory store. That matters because we can mix OEM and proven aftermarket parts on the same job without pushing a full replacement when a $30 balance shoe would fix it.

Which Andersen Models This Applies To

The parts and replacement work we handle most in Davie fall into three Andersen families: the 200 Series (Narroline and newer 200 gliding and double-hung), the 400 Series (Tilt-Wash, Frenchwood, and casements), and the modern 100 Series Fibrex frames. The compatibility gotcha most owners do not know is that a 200 Series balance from one production year often will not fit the same-looking window built three years later. Andersen changed balance shoe profiles several times in the 1990s and 2000s, so we always read the etched corner codes and measure the sash weight before ordering. We also handle E-Series and A-Series replacements, though those are usually custom and built to order because of the wood species or finish matching.

How to identify the right part: open the sash and look in the lower corners of the glass or frame for the Andersen etching. It will have a two-letter code and a series number. If the etching is worn off, we measure the visible glass width and thickness and match it to the Andersen production chart. For OEM versus aftermarket: Andersen OEM parts carry the manufacturer warranty and are the sensible choice for sashes still under their 20-year or 10-year coverage window. For older units out of warranty, we often recommend specific aftermarket balances and weatherstripping from suppliers we have tested in South Florida humidity for years. Some of those parts outlast the originals.

We also stock or order parts for Pella, and PGT windows for customers who have mixed brands on the same home.

Signs Your Andersen Window Replacement Is Failing

• The sash drops when you open it, or it will not stay up. This is a failed balance, and in Davie’s humidity, the cause is usually corrosion on the balance spring inside the shoe assembly, not the sash itself. A replacement balance set fixes it; a new window is rarely needed.
• Fog or milky haze between the panes that cannot be cleaned. The insulated glass unit seal has failed and moisture has entered the air space. There is no repair for a failed seal in a factory-sealed IGU; the glass unit gets replaced, and the sash frame is reused when it is sound.
• The crank turns but the casement sash does not move, or it moves in jerks. The operator gear has stripped or the hinge track has bent from years of salt air and binding. Andersen casement operators are replaceable in about twenty minutes with the correct arm length.
• You feel drafts around the closed sash, or daylight shows past the weatherstripping. Andersen compression weatherstripping hardens with age, and in Florida, it compresses permanently after five to seven years. Replacing it restores the air seal and quiets the window.
• The lock hardware is loose, the finish is peeling, or the keeper will not engage. Andersen locks and strike plates on 200 and 400 Series can wear to the point of failing a hurricane inspection. That is a hardware replacement, not a window replacement, and it is a common call for us in older Davie homes.

Replacement Cost & What’s Included

For Davie homeowners, here is what installed replacement work on Andersen windows typically runs with our fixed pricing model. We quote the part and the labor as separate line items so you see exactly what you are paying for, and there are no change orders added after the fact.

• Balance replacement (single sash): $140-$230 installed, including the pair of balances and adjustment
• Crank operator and hinge set (casement): $170-$290 installed
• Weatherstripping replacement (full window perimeter): $95-$150 installed
• Lock and keeper replacement: $85-$135 installed
• Insulated glass unit replacement (standard 200/400 Series sash): $240-$520 installed, depending on glass size and Low-E coating
• Full sash replacement (factory Andersen or quality aftermarket): $310-$680 installed for common sizes

What drives the range is glass size (a 48-inch door panel costs more than a 24-inch sash window), the specific IGU coating, and whether your Andersen series is still in active production. Every job includes the part, the labor to install and adjust it, and both warranty layers registered in writing before our truck leaves your driveway. That is our Keystone Standard.

DIY or Call Us?

The safe things to check yourself: read the etching in the glass corner, note whether the window is wood-clad or Fibrex, and check if the failure is on the sash or the frame. Most of the repair work on Andersen window replacement parts is not complicated, but the places DIY goes wrong in Davie are predictable: ordering the wrong balance shoe because it looked identical in an online photo, cracking a glass unit by prying against the frame instead of the sash glazing bead, or forcing a casement operator and stripping the new gear on the first turn. On high windows or second-story openings, the issue is working off a ladder while holding a glass unit in the wind. Glass units are heavy, the edges are unforgiving, and a dropped sash means broken glass in your shrub beds or worse. We do this work every week with the right jigs and setting blocks. Call (863) 208-5172 and we will give you a straight answer and an exact quote.

FAQs