ES Windows Energy-Efficient Windows Nationwide | TruePane Windows & Doors

ES Windows Energy-Efficient Windows in Davie: What to Know First

Independent ES Windows service for energy-efficient windows in Davie runs $180 to $1,400 for most repairs and $850 to $2,800 per opening for full replacements, with most jobs completed in a single visit. We’re TruePane Windows & Doors, and we’ve been setting and sealing glass in Broward County since 2008 under Dale Kessler, a second-generation glazier who learned the trade at McFatter Technical College right here in Davie. If you own ES Windows and your electric bill has crept up or a seal has fogged, call (863) 208-5172 and a live person answers.

Call (863) 208-5172

How ES Windows Products Fail - and How We Fix Them

ES builds a solid extruded aluminum frame, but the Florida climate finds every weak point. Here’s what we see on Davie jobs and what we do about it.

• Thermal break separation on the ES 7000 series. The polyamide strut between interior and exterior aluminum works well until years of sun and humidity work the joint loose. Energy loss shows up as a warm band you can feel around the sash perimeter. We re-bed the break, re-square the sash, and re-seal with a marine-grade butyl tape. In Davie, we see this on east-facing elevations first.
• Failed dual-seal insulated glass units. The desiccant in the spacer bar saturates over time, especially on older ES 5000 sliders. The telltale is a milky haze that won’t wipe off the inside face. We measure the exact IGU thickness and order a matched Low-E replacement with argon refill, not a generic sealed unit.
• Worn wool pile weatherstripping on sliding sashes. ES sliding windows depend on the pile strip to keep conditioned air in. Once the pile flattens, you get air infiltration around the sash and condensation on the interior track. We replace with a heavier-grade pile than the factory original, which holds up better in Davie’s wet season.
• Roller and track wear on the ES 9000 lift-and-slide. A heavy sash on a worn roller drags, which pulls the weatherstrip out of alignment and opens an air path. We replace rollers, re-align the track, and reset the interlock. Ignoring the drag usually means a bigger repair a year later.
• Glazing bead gasket shrinkage around fixed lites. ES fixed windows and transoms use a compression gasket that hardens and shrinks with age. Water gets behind it, then air follows. We pull the stop, replace the gasket, and bed the lite in a neutral-cure sealant rated for Broward County sun.

Our ES Windows Energy-Efficient Windows Process

Every ES Windows job follows the same path. No shortcuts, no surprises on the bill.

1. 1
   Measure and inspect. We measure every opening twice, check the glass thickness and coating, and note which direction the wall faces. Dale’s founding rule applies: if it is not right on paper, it will not be right in the wall.
2. 2
   Diagnose in writing. We write down what failed, why, and what it will cost to fix. No verbal estimates that drift later. You see the line items before we touch a screw.
3. 3
   Parts decision. For ES warranty-covered work, we use OEM parts and follow warranty-safe procedures as an independent ES Windows service provider. For out-of-warranty repairs, we quote both OEM and quality aftermarket options on the same page and tell you the trade-offs honestly.
4. 4
   The repair or replacement. One visit, one crew, background-checked and uniformed. We pull the sash or lite, set the glass or seal, re-square, and re-glaze. Most energy-efficient ES Windows jobs are done the same day.
5. 5
   Test and verify. We check the sash for plumb and level, run a smoke pencil along the seal line to verify no air movement, and confirm the frame is draining properly.
6. 6
   Paperwork and guarantee. Both manufacturer warranty layers get registered in writing before the truck leaves the driveway, with durations stated. The Done Right Promise covers our workmanship. If a seal fails or a sash binds within 90 days, we come back and make it right. No arguing.

What ES Windows Energy-Efficient Windows Costs in Davie

• Glass-only replacement, single sash: $180 to $400
• Seal and thermal break repair, one window: $250 to $550
• Full sash replacement with Low-E argon IGU: $600 to $1,400
• Whole-opening replacement, ES-compatible energy package: $850 to $2,800 per window, depending on size and glass spec

What moves the price is glass size, Low-E coating spec, argon fill, and whether the frame can be salvaged or needs re-bedding. Davie homes on the water often need a higher-end coating for salt and UV exposure. We keep it simple: no second appointment left hanging, no change orders. Call (863) 208-5172 for a free estimate in writing.

Why Davie Homeowners Call TruePane Windows & Doors for ES Windows Work

We’re not the cheapest bid in Davie, and we’re not trying to be. We’re the last call you make because the first one didn’t hold up. The Done Right Promise is in writing. The Keystone Standard means both warranty layers are registered before we leave your driveway, with the durations stated. A live person answers the phone 24/7, not a voicemail tree. And if ES Windows turns out not to be the right glass for your elevation, we quote Andersen, Pella, and PGT side by side on paper so you can see what you’re actually buying. Dale Kessler has been measuring and setting windows in Broward County for 26 years. We plan to be here in 30 more.

FAQs