PGT Window Replacement Nationwide | TruePane Windows & Doors

PGT Window Replacement in Davie: What to Know First

PGT window replacement in Davie typically runs $650 to $1,800 per opening depending on the series, size, and whether you need a full frame or insert replacement. Most single-window PGT jobs are done in one visit, and we schedule replacements within five to ten business days of the estimate. We are an independent PGT service provider, not a manufacturer affiliate, which means we give you straight answers about what your window actually needs rather than what the warranty department wants to hear.

Call (863) 208-5172

If you own a home in Davie with original PGT windows from the 1990s or early 2000s and you are seeing fogged glass, a stiff crank, or a sash that no longer sits square in the frame, this page is written for you. Dale Kessler and the TruePane crew have been measuring, setting, and sealing PGT products in Broward County for over 26 years. Call (863) 208-5172 and a live person answers, any hour of any day.

How PGT Products Fail - and How We Fix Them

PGT builds a solid window, but every product line has its habits in this climate. Here are the five failure patterns we see most often on PGT windows in Davie homes, and what we do about each one.

• Fogged glass on PGT WinGuard aluminum single-hung units. The WinGuard series was popular in Davie tract housing from the late 1990s through the mid-2000s. The original sealant between the panes eventually breaks down under constant UV and humidity cycling, which lets moisture in and clouds the glass. The fix is a full IGU replacement using an OEM-spec unit, not a drill-and-fill cosmetic repair that fogs again in two seasons. We order the replacement sash glass through PGT’s parts network and set it to the same daylight opening as the original.
• Stiff or seized cranks on PGT casement and awning windows. Casement operators on older PGT units rely on a worm-gear drive that was never meant to handle a decade of salt-tinted air from the Intracoastal. The grease dries, the gear teeth strip, and the homeowner assumes the whole window is shot. It usually is not. We replace the operator with a factory-spec part, re-bed the hinge track, and the window swings like new. A full replacement only makes sense if the frame itself has rot or deflection.
• Failing balances on PGT 7700 and 2200 series double-hung windows. In Davie’s wet summers, the coil balances inside the jamb channel corrode and lose tension. The sash either slams shut or will not stay up. We replace balances in pairs, even when only one side looks bad, because the surviving balance is usually weeks behind. Aftermarket balances are available, but we source PGT profile-matched parts so the sash travel and weatherstripping seal stay exactly on spec.
• Frame deflection on PGT aluminum impact windows in stucco openings. This is the one that gets missed by a quick quote. Davie’s wet-dry seasonal cycle swells the wood buck behind the stucco, which slowly bows the aluminum frame. You will see it as a diagonal gap at the lower corner or a latch that no longer aligns. An insert replacement will inherit that same deflection. We pull reveal measurements at three points per side before we ever quote, and if the opening is out of true by more than 1/8 inch, we recommend a full frame replacement with fresh flashing and a corrected rough opening.
• Lost argon and edge-of-glass sealant creep on PGT SpectraGuard insulating units. SpectraGuard was PGT’s premium low-E glazing package in the 2000s. We still get calls from Davie homeowners who noticed the center of the glass looks slightly concave or the edges show a milky haze. That is gas loss and sealant migration, a slow failure that quietly erodes the window’s energy performance. The fix is a full IGU swap. We quote the replacement glass and the labor as one line item, and we register the new glazing warranty in writing before we leave the driveway.

Our PGT Window Replacement Process

Every PGT job we run in Davie follows the same sequence. It is not complicated, but skipping steps is what causes the problems we get called in to fix later.

1. 1
   Call and talk to a person. You call (863) 208-5172. Dale or a trained tech asks what you are seeing, when it started, and which windows are involved. We schedule the site visit at a time that works for you.
2. 2
   Measure every opening twice. Our tech checks the reveal in three places per side, confirms the existing frame material and condition, and photographs the opening. If the frame is bowed, we note it in writing on the estimate.
3. 3
   Decision on parts: OEM versus aftermarket. We tell you straight which parts must be PGT-sourced for warranty safety and profile match, and where a quality aftermarket part is actually the more sensible choice. This decision is written on your quote, not buried in a verbal summary.
4. 4
   The replacement itself, done in one visit. We pull the old sash or frame, clean the opening, reset the new unit in a bed of sealant rated for South Florida UV, and re-flash as needed. Most single-window replacements are finished in a day.
5. 5
   Operate, inspect, and clean up. We cycle every moving part, check the drainage weep holes, and verify the lock engages without force. The work area is clean before the truck moves.
6. 6
   Warranty registration before we leave. Both warranty layers are registered in writing with the manufacturer and with TruePane. You get a copy, with the durations stated, before we head out of Davie.

What PGT Window Replacement Costs in Davie

Here is an honest look at what PGT replacement work costs in Davie right now. These are installed prices, labor included.

What moves the price is frame condition, access (second story or tight stucco returns), and whether you need a full frame or a glass-only swap. We also carry PGT profile-matched aftermarket glass options when the budget is tight, and we will tell you the trade-off in plain terms. Call (863) 208-5172 for a written line-item quote. Estimates are free, and the number we quote is the number you pay.

Why Davie Homeowners Call TruePane Windows & Doors for PGT Work

We are not the cheapest bid in Davie, and we do not pretend to be. We are the last call a homeowner makes after the first window company left them with a fogged seal and a door that sticks in July. TruePane has served this community since 2008 through the heritage Dale Kessler inherited from his father, a glazier who kept his shop van in the driveway off Orange Drive near the old Davie Arena. The Keystone Standard governs every job: both manufacturer warranty layers registered in writing, with durations stated, before our truck leaves the driveway.

We hire local, train apprentices into journeymen, and show up in uniform with tools that are clean and calibrated. If your PGT window is beyond sensible repair, we also carry lines like Andersen, Pella, and CGI so you can compare side by side on paper and make a decision without pressure. A live person answers our phone 24 hours a day, seven days a week. No call center, no voicemail tree, no callback form. That is the way Dale has run it since 2008.

FAQs