Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Why Davie Homeowners Choose Andersen Windows & Doors
We provide independent Andersen windows and doors service in Davie - Andersen Windows & Doors in Davie, FL repair, replacement, parts, weatherstripping, hardware, and hurricane-impact upgrades - without any manufacturer affiliation. Our technicians know Andersen’s extrusion profiles, joining methods, and hardware well enough to diagnose a problem over the phone about half the time, and well enough on site to fix it right the first visit most of the time. If you own Andersen windows or doors in Davie and something is binding, fogging, leaking, or refusing to lock, call us at (863) 208-5172.
Here is the honest distinction: TruePane Windows & Doors is not an Andersen-authorized dealer, and we will not pretend otherwise. What we are is a Davie-based glazing company founded by Dale Kessler, a second-generation glazier who grew up off Orange Drive near the old Davie Arena and has been setting windows in Broward County for twenty-six years. We service Andersen products because we understand how they are built, how they fail in South Florida humidity, and what it takes to make them right without voiding a warranty or selling you a replacement you do not need.
Why Trust TruePane Windows & Doors for Your Andersen Windows & Doors?
Andersen builds a good window. The 400 Series Woodwright is a legitimate piece of joinery, the A-Series uses a substantial frame, and the E-Series offers real architectural flexibility. But a window is only as good as its installation and the service behind it. We have spent years working on the specific Andersen profiles, sash balances, weatherstripping channels, and locking hardware that show up in Davie homes, from 1970s CBS ranch houses with original single-pane aluminum to newer construction with wood-clad Andersen units.
Dale Kessler learned this trade at McFatter Technical College in Davie and on job sites across Broward County, where he learned the difference between what a spec sheet says and what Florida weather actually does to a frame. His founding rule still governs every Andersen job we take on: if the pane is not true, the job is not done. That means we check the reveal, the square, and the seal before we call a repair finished. It also means we register both manufacturer warranty layers in writing before the truck leaves your driveway, and we stand behind our work with a Done Right Promise.
Where other providers treat Andersen service as a brand they tolerate, we treat it as a craft commitment. Our technicians are background-checked, uniformed, and trained to work in your home the way they would work in their own mother’s. No surprise line items on the bill, no second appointment left hanging, and a live person answers our phone 24 hours a day, 7 days a week.
Common Andersen Windows & Doors Problems We Fix in Davie
- Seal failure and fogging in 400 Series glass. The Andersen 400 Series is a workhorse, but the insulating glass units eventually lose their perimeter seal in Davie’s heat and humidity. Once moisture gets between the panes, the glass fogs and the only real fix is replacing the IGU - which we do with new glass sized to the existing sash, so you keep the frame.
- Warped or swollen wood sashes in E-Series windows. The E-Series offers custom sizing and real wood interiors, but wood moves. Davie’s high summer humidity swells the sash, the window starts to stick, and eventually the finish checks and water intrudes. We re-plane, reseal, and re-hang sashes where the wood is sound, and we tell you plainly when it is not.
- Failing lift mechanisms and tilt latches in 200 Series double-hung windows. The 200 Series tilt latches and spiral balances wear out. When a latch snaps, the sash will not stay up or will not tilt in for cleaning. We stock replacement latches and balances, and most of these repairs take under an hour.
- Rotted exterior wood trim on A-Series windows. Water intrusion around the frame is the usual culprit, especially on Davie homes where irrigation sprays the window line or where original flashing was never flashed correctly. Once the trim rots, it wicks moisture into the rough opening. We cut out the rot, replace the trim, and correct the flashing before it reaches the framing.
- Crank operator and multi-point lock failures on Andersen casements. The gear inside a casement crank strips after years of use, and the multi-point lock gets misaligned. We replace the genuine Andersen operator, adjust the keepers, and reset the sash alignment so the window closes square and locks tight.
Andersen Parts & Our Repair-vs-Replace Approach
For anything that keeps your window weathertight or secure - locking mechanisms, weatherstripping, balance systems, operators - we use genuine Andersen replacement parts. These parts are built to match the extrusion profiles and tolerances Andersen engineered, and putting an aftermarket gearset into an Andersen crank is how you get a window that still does not lock correctly in August. For non-structural items like rollers and insect screens, we use high-quality aftermarket alternatives to keep repair costs reasonable, and we will tell you which is which on the estimate.
On repair versus replace, our rule is simple: if the frame and sashes are sound, we repair. If the wood is compromised or the glass is outdated single-pane, we tell you to replace. Nobody at TruePane makes a commission on selling you a new window. We will quote you the repair and the replacement side by side on paper so you can see the numbers yourself. If you would like a second opinion on an Andersen window another company said needs replacing, call (863) 208-5172 - we will measure it and tell you the truth.
Our Andersen Service Process - Step by Step
- 1
Diagnosis. We inspect the unit, check the reveal and square, identify the failed part or seal, and explain the cause in plain English. For Andersen units, that means checking the specific failure points - seal, balance, latch, operator, trim, flashing - not just guessing at the symptom.
- 2
Repair or replace. We quote genuine Andersen parts where they matter and aftermarket where they do not. If the frame is sound, we repair. If it is not, we tell you and quote a replacement unit sized to the existing rough opening.
- 3
Test. We cycle the window or door through full operation, verify the lock engages, check the weatherstripping, and confirm the reveal is consistent. If the pane is not true, the job is not done.
- 4
Warranty. We register both manufacturer warranty layers in writing, state the durations, and stand behind our workmanship with the Done Right Promise. No paperwork fights, no fine print that covers neither.
Andersen Products We Service & Install in Davie
We service and install the full Andersen residential range for Window Installation: 400 Series Woodwright, 200 Series, A-Series, and E-Series. That covers double-hung, casement, picture, and specialty shapes, as well as Andersen patio and French doors. We stock common Andersen replacement parts locally - tilt latches, spiral balances, crank operators, weatherstripping, rollers, and insect screen components - so most Davie repairs are completed in a single visit. For hurricane-impact upgrades on existing Andersen frames, we quote Andersen impact-rated glass where the frame supports it and explain when a full replacement opening is the code-compliant path in Davie.
We Also Service These Brands
While this page is about Andersen, we are not a single-brand shop. TruePane Windows & Doors is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI. That matters because it means we will quote your Andersen repair honestly - we have no reason to push you toward one brand or another.
FAQs - Andersen Windows & Doors Service in Davie
High summer humidity in Davie causes wood sashes to absorb moisture and expand, especially on the E-Series where the interior is real wood. Once the sash swells, it binds in the frame and eventually the finish checks and water gets in. We re-plane and reseal sashes where the wood is sound, and we advise replacement when it is not. Call (863) 208-5172 for an exact diagnosis.
Yes. The insulating glass unit inside a 400 Series picture window is replaceable, and we keep the existing frame. You get clear glass again without paying for a new window. The new IGU is installed to the original sash dimensions, sealed, and tested. Call (863) 208-5172 for a free estimate.
It depends on the frame. Some Andersen frames accept impact-rated glass; others do not meet current Broward County wind-borne debris requirements and must be replaced as a full opening. We inspect the frame, check the code compliance, and quote both paths on paper so you see the real numbers. In Davie, this is often as much an insurance decision as a window decision.
Fogging means the perimeter seal on the insulating glass unit has failed. Moisture gets inside, condenses, and the glass fogs permanently. The fix is replacing the IGU, not the whole window. We build the replacement glass to the sash dimensions and install it in place. Estimates are free - call (863) 208-5172.
Yes. Tilt latches on the 200 Series are a common failure, and we keep replacements in stock locally. The repair is quick, the window tilts in for cleaning again, and the sash stays up like it should. Most Davie latch repairs are done in one visit.
Most Andersen repairs in Davie run between $120 and $450, depending on the part and the labor. A full IGU replacement on a 400 Series runs higher, and a hurricane-impact upgrade depends entirely on the frame and opening size. We give you a written line-item quote before any work starts, with both warranty layers registered in writing. Call (863) 208-5172 for an exact quote - estimates are free.
Book Your Andersen Service in Davie, FL
If your Andersen windows or doors are binding, fogging, leaking, or refusing to lock, call TruePane Windows & Doors at (863) 208-5172. We will schedule a diagnosis, quote the repair or replacement on paper, and stand behind the work with the Done Right Promise. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Davie since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After