Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Pembroke Pines
Impact windows and doors in Pembroke Pines cost between $1,200 and $4,800 per opening for most residential work, with impact-rated custom units running $2,500 to $6,500 depending on size, frame material, and the Miami-Dade NOA requirements your HOA and Broward County will both demand. We serve every corner of the city, from Silver Lakes to Chapel Trail to Pembroke Falls, and our crews know the two-step approval process here better than most shops know a single permit pull. If you’re looking at original aluminum sliders that fog, bind, or fail your insurance inspection, call us at (863) 208-5172 and we’ll give you an honest read on what needs replacing and what can wait.

Why TruePane Windows & Doors Is Pembroke Pines’s Preferred Custom Windows & Doors Company
TruePane has been glazing homes in South Florida since 2008, and the work we do in Pembroke Pines is governed by a simple rule Dale Kessler keeps on the whiteboard: if the pane is not true, the job is not done. That standard matters in this city because the margin for error is thin. A custom window that measures a quarter-inch off in a CBS opening will not seat correctly, will not pass an HVHZ inspection, and will fail an insurance company’s four-point review. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before our truck leaves your driveway.
Background-checked, uniformed technicians handle every Pembroke Pines job. They arrive when we say they will, work the way they would work in their own mother’s house, and stand behind the install with our Done Right Promise. We’re not a franchise crew cycling through town. We hire local, train apprentices into journeymen, and sponsor county fairs and church roof funds because we plan to be answering our phone in this community thirty years from now.
Our Custom Windows & Doors Services in Pembroke Pines
Our Custom Windows & Doors team handles everything from a single oversized picture window in a Silver Lakes living room to full impact-rated retrofits across an entire Pembroke Falls block. We install, replace, and service windows and doors for residential homeowners, and we are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. Here is what we do most in this city:
Impact-Rated Custom Windows
Pembroke Pines sits entirely within Broward County’s High-Velocity Hurricane Zone, so every replacement window we install here must carry a Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval. That legal threshold eliminates most big-box store products from use in this city, period. We custom-order impact glazing with design pressure ratings matched to your home’s specific exposure, and we pull the Broward County permit, get the product approval stamped, and register both manufacturer warranty layers before we leave the driveway.

Custom Shape Windows
Need a true radius window in a Chapel Trail gable, a trapezoid over a garden tub in a Pembroke Isles master bath, or an eyebrow window that matches the original 1980s architecture? Our Custom Windows & Doors shop orders fusion-welded frames cut to exact dimensions in vinyl, aluminum, or wood-clad. In Pembroke Pines, custom shape windows nearly always require ARC approval before permitting, so we submit the shop drawings to your HOA board at the same time we order the glass. That parallel path saves weeks.

Oversized Glass Panels
Sliding glass doors that span twelve feet or more, floor-to-ceiling fixed panels in a remodeled family room, or a panoramic impact wall facing the lake in Silver Lakes all fall under oversized glass work. The glass itself has to be thicker, the design pressure calculations more exacting, and the install crew has to know how to set a 300-pound panel into a CBS opening without cracking the stucco. Do not hire a shop that learned that lesson on someone else’s job. We have set oversized panels in Pembroke Pines for years, and we have the references to prove it.

Architectural Grilles & SDLs
HOA boards in communities like Pembroke Falls police frame color and grid patterns strictly, and a non-compliant order gets sent back before Broward County even sees the permit application. Simulated divided lites, true divided lites, prairie grids, colonial muntins, flat or sculpted profiles: whatever your ARC guidelines demand, we build the window to match. We photograph the approved neighbors, pull the community’s palette sheet, and quote the grid profile in the line item. No gray area.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Pines
We are an authorized installer for PGT, CGI, and Ply Gem, among more than a dozen manufacturer lines. That matters in Pembroke Pines because impact-rated products from these builders already carry the Miami-Dade NOAs your permit reviewer will look for, and local warehouse stock means we are not waiting on a factory in another state when your HOA has scheduled an install window. We quote manufacturer lines side by side on paper so you see exactly what you are buying and what it costs. A square deal, in writing.

Common Custom Windows & Doors Problems We See in Pembroke Pines Homes
- Original 1980s aluminum sliders failing HVHZ design pressure ratings. These pre-Andrew single-pane units were never engineered for current wind load requirements, and insurance companies increasingly flag them on four-point inspections. The practical fix is a custom impact-retrofit window, sized to the existing rough opening but engineered to a far higher standard.
- Condensation and fog between glass panes in CBS homes. Year-round humidity attacks frame seals and insulated glass units. We regularly pull failed picture windows from Chapel Trail and Silver Lakes homes where the argon fill is gone and the U-factor has spiked. It is not a cleaning problem. The seal is dead.
- HOA Architectural Review Committee rejections. In communities like Pembroke Falls, a frame color one shade outside the approved palette stalls a project by weeks before the permit even moves. This is the single most avoidable delay in Pembroke Pines window work. We handle ARC submittals with the shop drawings and approval codes attached.
- Jalousie windows in Century Village condos that cannot support a new install without reframing. Many of these older 55+ buildings hit blocking or structural issues behind the old jalousie frame, where the rough opening will not hold a zero-threshold door or a modern impact unit without structural work. We inspect first and tell you the truth about what the opening can carry.
Pricing for Custom Windows & Doors in Pembroke Pines, FL
A typical custom window in Pembroke Pines runs $1,200 to $4,800 per opening. Impact-rated custom windows run $2,500 to $6,500, with oversized panels and custom shapes at the upper end. A custom sliding glass door in Pembroke Pines spans $3,800 to $9,000 depending on panel width and frame material. A full-house impact retrofit in a Silver Lakes or Pembroke Isles CBS home commonly runs $22,000 to $45,000. The factors that move the number: Miami-Dade NOA compliance is not optional here, and it adds material cost. Grille profiles per ARC palette, frame color matching, second-story access, and permitting with an HOA submittal all influence the final line. We give you the price in writing before work starts. No surprise line items, no change orders. Call (863) 208-5172 to schedule your free estimate, and we will walk you through it line by line.
We Also Serve Cities Near Pembroke Pines
We regularly work in Miami Gardens, Hollywood, and Fort Lauderdale, and many of our Pembroke Pines customers have family and rental properties in those cities. The same Miami-Dade NOA standard applies across Broward County, and our Pembroke Pines crews are licensed and prepared for all of it. If your next project sits just over the city line, we are already on the road.
Serving Pembroke Pines, FL - Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Pembroke Pines
A Miami-Dade Notice of Acceptance means the window has been tested and approved to withstand the wind pressures of a High-Velocity Hurricane Zone, and it is legally required for every replacement window in Pembroke Pines. Without an NOA or a Florida Product Approval, your window fails the Broward County permit review, point blank. We only install products that carry a current NOA, and we put the approval number on your paperwork.
Yes, in most buildings, provided the custom impact unit matches the condo association’s approved exterior aesthetic and the existing rough opening can support the new frame. Century Village boards generally allow impact glazing as long as the visible frame profile and grid pattern stay consistent. We document the existing look, match the profile, and submit the product drawings for board approval before ordering. Call (863) 208-5172 and we will walk you through the documentation.
Yes. Any door that changes the rough opening, the header, or the structural load path requires a Broward County permit, and in HOA-governed communities like Pembroke Falls, you have an additional ARC approval step before the county permit can be submitted. We handle both approvals in order, pull the permit, and close it out with all inspections passed.
They can add two to six weeks to the front end of any job. Pembroke Pines has a two-step process: HOA Architectural Review Committee approval first, then the Broward County permit. Boards in communities like Pembroke Falls police frame color and grid patterns tightly, and a rejected submittal restarts the clock. We submit ARC packages with manufacturing shop drawings and color codes included, which reduces the back-and-forth. But plan for the time.
Yes, provided the panel is engineered to meet current HVHZ design pressure requirements for that specific opening and the installation passes a Broward County structural review. In a concrete block home, the lintel or header above the opening sometimes needs reinforcement to carry the larger glass load. We assess that during the free estimate and quote the structural work if it is needed. Call (863) 208-5172 and we will put the numbers in front of you.
Call TruePane Windows & Doors for Custom Work in Pembroke Pines
When you are comparing window replacement quotes in Pembroke Pines, ask each shop the same question we ask ourselves: will this pass the Miami-Dade NOA, the HOA’s ARC review, and the insurance company’s four-point inspection? If they pause, move on. If they answer, get it in writing. That is the standard we hold ourselves to, and it is the standard your home deserves. Our crews replaced a failed picture window in a Chapel Trail CBS home after the original single-pane aluminum frame had pitted and bound from years of humidity. The insulated glass unit’s seal was gone, the argon fill was depleted, and the opening needed a custom ViewLux impact-rated unit. We pulled the old jamb, flashed the opening with butyl tape, and installed a fusion-welded frame with low-E glass and a Miami-Dade NOA. The pane is true, the job is done, and the warranty layers are registered in writing. That is how we work. Call (863) 208-5172 for your free estimate, and we’ll show you what a square deal looks like.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Pines and surrounding Broward County communities. Dale founded TruePane in 2008 on a principle that out-of-true installs and voided warranties were problems worth fixing permanently.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After