Therma-Tru Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

Therma-Tru Shingle, Tile & Metal Roofing in Davie: What to Know First

We provide independent Therma-Tru service for shingle, tile, and metal roofing systems throughout Davie, and most diagnostic visits are completed within one to two business days. Our pricing is straightforward and written down before any work begins, with no surprise line items, and every job is backed by our Done Right Promise. This page is for Davie homeowners who own a Therma-Tru product and want to know what it costs to fix it properly, how long the work takes, and whether the manufacturer warranty still applies. Call (863) 208-5172 to schedule a free estimate.

Call (863) 208-5172

If you own a Therma-Tru entry door, sidelight, or transom and the roofing around it is failing, this page will tell you exactly what we find when we arrive, how we price the repair, and what we do differently from a roofer who treats the brand name as an afterthought. As an independent Therma-Tru service provider, we are not affiliated with or authorized by Therma-Tru. We are a local Davie company that has served Broward County homeowners since 2008 through a craft tradition Dale Kessler inherited from his father, a glazier who kept a shop van parked in the driveway off Orange Drive most nights.

Key Takeaways:

• Therma-Tru door and window openings fail at the roof interface more often than the product itself fails, and Davie’s afternoon thunderstorms accelerate that failure.
• We diagnose the opening, the flashing, and the roofing material together, because a shingle patch over a failing Therma-Tru sill pan will leak again within one season.
• Every repair is quoted in writing before work starts, with both manufacturer warranty layers registered in writing before the truck leaves your driveway.
• Call (863) 208-5172 and a live person answers. No voicemail tree, no regional call center.

How Much Does Therma-Tru Shingle, Tile & Metal Roofing Repair Cost in Davie?

Therma-Tru repair work at the roof line in Davie typically runs between $280 and $1,900 depending on whether the issue is flashing, a rotted rough opening, or a full frame-and-threshold replacement. A diagnostic visit that identifies the source of the leak and produces a written line-item quote costs nothing when you proceed with the work. Call (863) 208-5172 for an exact quote - estimates are free.

How Therma-Tru Products Fail - and How We Fix Them

Therma-Tru builds a solid fiberglass and composite door, but the opening around it is what fails in Davie’s climate. Here are the five failure modes we see most often on Therma-Tru installations in Davie, and what we do on each one.

• Therma-Tru Classic-Craft door bottom rot from tile roof runoff. Davie homes with barrel tile roofs direct water off the eave and down the wall, and a Therma-Tru Classic-Craft door without an adequate sill pan takes that water at the threshold. The fiberglass skin hides the rot until the door binds or the frame sags. We pull the door, replace the rotted sub-sill with pressure-treated stock, install a proper sill pan, and reset the door with new flashing. This is a fix no roofer alone will do, because the door has to come out to do it right.
• Sidelight frame separation on Therma-Tru Smooth-Star units under metal roof drip lines. Davie homes with standing-seam metal roofs shed water fast, and a Smooth-Star sidelight that was shimmed with plain wood wedges will swell, split, and pull the frame out of square. The glass then rattles and the weatherstrip fails. We rebuild the rough opening with composite shims, re-seat the unit, and re-flash the exterior with the correct counter-flashing so runoff never touches the frame again.
• Therma-Tru transom leakage at the head flashing where shingle roofs meet the wall. This is the most common call we take in Davie after a summer storm. The shingle roofer runs step flashing behind the siding but never ties it into the Therma-Tru transom’s nailing fin, so water tracks behind the fin and drips down inside the wall. We remove the interior trim, locate the true path of the water, and correct the flashing from the outside. The fix usually does not require new roofing, just proper integration.
• Thermodynamic hinge wear on Therma-Tru doors exposed to direct Davie afternoon sun. Therma-Tru doors are heavy, and the hinges spec’d for original installation wear unevenly when one side of the door bakes in western exposure while the other stays shaded. The door drops, the sweep tears, and water gets past the threshold. We re-hang the slab with new hinges sized for the door’s actual weight, adjust the reveal, and replace the sweep so the door seals completely.
• Hardware lock-up on Therma-Tru entry doors after tile roof replacements. When a Davie homeowner replaces a tile roof, the workers walk dust and grit into the door jamb, and that grit binds the multi-point hardware. We clean and re-lubricate the hardware, replace any worn strike plates, and verify the door locks without friction. It is a small job, but it matters when the door is your primary entrance.

Our Therma-Tru Shingle, Tile & Metal Roofing Process

Here is how a Therma-Tru job works when you call TruePane Windows & Doors in Davie. Every step is written down, and nothing proceeds until you approve the number.

1. 1
   Call and talk to a live person. You call (863) 208-5172. We answer. You describe what you are seeing: water on the floor after storms, a door that binds, a draft at the sill. We schedule a diagnostic visit.
2. 2
   We measure everything twice. Dale Kessler’s rule applies to every opening: if it is not right on paper, it will not be right in the wall. A technician checks the rough opening, the threshold elevation, the roofing material above the door, and the flashing condition. No guessing.
3. 3
   We write the quote on paper. You see every line item: parts, labor, flashing, sealant, warranty registration. There is no verbal estimate and no change order later. The number you approve is the number you pay.
4. 4
   We decide OEM versus quality aftermarket with you. Therma-Tru hardware and weatherstripping are often worth paying for. Frames and hinges are sometimes better sourced from our regular suppliers. We tell you the trade-off in plain terms and let you decide.
5. 5
   We do the work and test it. The door is reset, the flashing is corrected, the roof interface is sealed. Then we run water over the opening and watch where it goes. If it leaks, we are not done.
6. 6
   We register both warranty layers in writing before we leave. The Done Right Promise is on your invoice. The manufacturer warranty is registered and the confirmation is in your hand. The truck does not leave until both are done.

What Therma-Tru Shingle, Tile & Metal Roofing Costs in Davie

Here are the realistic ranges for the Therma-Tru work we do in Davie. These are not internet averages; they are what we quote week to week in this market.

What moves the price: the amount of hidden rot, whether the original installer used the right sill pan, and whether the roof work above the opening needs correction before flashing can be properly tied in. A tile roof is generally more expensive to correct around than shingle because individual tiles must be lifted and reset. We quote all of this before work begins. Call (863) 208-5172 for an exact written quote - it costs nothing to find out.

Why Davie Homeowners Call TruePane Windows & Doors for Therma-Tru Work

Davie homeowners do not remember the cheapest contractor. They remember the one who returned their call. We have been a local company since 2008 through Dale Kessler’s heritage of craft, and our technicians are background-checked, uniformed, and trained to work in your home the way they would work in their own mother’s. Every Therma-Tru job carries our Done Right Promise: if it is not done right, we make it right, no paperwork and no arguing. And while we work on Therma-Tru products regularly, we also service PGT, CGI, CWS, and ES Windows, which means we can address the rest of the house while we are there. The Keystone Standard applies to all of it: both warranty layers registered in writing, durations stated, before the truck leaves the driveway.

FAQs