Mr-Glass Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

Mr-Glass Shingle, Tile & Metal Roofing in Davie: What to Know First

TruePane Windows & Doors provides independent Mr-Glass shingle, tile & metal roofing in Davie, FL. Most Mr-Glass repairs we handle are completed in a single visit, with upfront pricing and no change orders after work begins. We are not a franchise and not the cheapest bid in town; we are the crew that fixes it right the first time so you don’t pay twice. If you own a Mr-Glass roof in Davie and something is failing, call (863) 208-5172 and a live person answers, day or night.

Call (863) 208-5172

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass products show up in Davie homes in enough variety that a generic roofer gets lost quick. We see the same failure modes year after year, and knowing which line is on the roof changes which fix is correct. Here is what we find, in plain terms:

• Tile slippage on the Mr-Glass clay tile line after a wet season. Davie’s heavy summer rain saturates the underlayment and the tile battens swell, which loosens the mechanical fixings. We reset the tile with the correct fastener per the original installation, not a dab of mastic that lets go in the next storm. This is the number one call we get from Mr-Glass tile roofs in Davie after August.
• Metal panel oil-canning on Mr-Glass standing seam roofs. Oil-canning is the wavy distortion you see in flat metal panels when the sun hits them at certain angles. It is usually caused by improper clip spacing during original installation or thermal expansion against a fixed point. We correct the clip layout where accessible and reseat the panels so they move the way metal is supposed to move in South Florida’s heat and humidity.
• Ridge cap blow-off on Mr-Glass shingle roofs. The ridge caps are the first thing to go in a tropical event because they sit at the highest wind pressure zone. On Mr-Glass shingle roofs in Davie, we often find the caps were nailed with standard-length nails, not the longer nails required for ridge cap applications. We replace caps with the right nail length and count per manufacturer spec, then seal the leading edge so wind cannot get under it.
• Valley flashing leaks on Mr-Glass tile roofs. Where two roof planes meet, the valley channel takes the most water volume on the roof. Mr-Glass tile roofs from certain production years used a lighter gauge valley metal that corrodes under Davie’s salt air and the constant moisture cycle. We replace the valley with heavier gauge metal and re-bed the edge tiles so water sheets cleanly into the channel instead of wicking underneath.
• Shingle granule loss on the Mr-Glass architectural shingle line. Granules are the UV shield on asphalt shingles. When they let go early, the mat underneath bakes and brittles. In Davie’s sun, we see granule loss accelerate on Mr-Glass shingle roofs that were under-ventilated at the ridge. We do not just fill the lost granules; we assess the attic ventilation first and address that, because new shingles on a hot attic fail the same way in eight years.

Our Mr-Glass Shingle, Tile & Metal Roofing Process

Every Mr-Glass job we take follows the same path, whether it is a repair or a full roofing replacement. We are an independent Mr-Glass service provider, not an authorized dealer, so our only loyalty is to the homeowner and the roof itself.

1. 1
   The call. A live person answers. You describe what you are seeing. We schedule a time that works for your household, and the technician shows up when we say.
2. 2
   The inspection. We walk the roof and look at the failure, but we also look at what caused it. A leak in one place usually starts somewhere else. We measure everything twice.
3. 3
   The parts decision. If the roof is still under manufacturer warranty, we use OEM Mr-Glass components where available to keep that warranty intact. If the roof is out of warranty or OEM is no longer produced, we explain the trade-off on paper: what the aftermarket part is, what it costs, and how it compares. No hidden substitutions, ever.
4. 4
   The quote, in writing. You get line items, not a lump sum. If we quote a number, that is the number you pay. Fixed pricing, no change orders unless you ask for additional work yourself.
5. 5
   The work. We do the repair or replacement, clean up the job site, and walk you through what we did before we leave the driveway. If the work touches anything else on the roof, we point it out, not because we are selling, but because you should know what is up there.
6. 6
   The guarantee. Every job is covered by our Done Right Promise. If it is not done right, we make it right. No paperwork fights, no arguing. That is the whole promise.

What Mr-Glass Shingle, Tile & Metal Roofing Costs in Davie

Folks in Davie want honest numbers before they commit. Here is what we typically see for common Mr-Glass roofing work, though every roof is different:

• Ridge cap replacement (shingle or tile): $350-$650 for a typical Davie ranch or two-story
• Valley flashing replacement: $500-$1,100 depending on valley length and material gauge
• Tile reset and refastening (per square): $275-$475 when tiles are reusable and underlayment is sound
• Standing seam panel reseating or clip correction: $600-$1,400 depending on access and panel count affected
• Shingle repair (granule loss, lifted shingles, small sections): $225-$550 per section

What moves the price is access. A single-story hip roof is faster than a two-story with steep pitches and clay tile. If this is an insurance claim, we will help you document everything and talk to the adjuster if needed. To get an exact quote, call (863) 208-5172 and schedule a free estimate. The number we give you is the number you pay.

Why Davie Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We have been serving this community across three generations of trade work, and we plan to be here for the next thirty years. Dale Kessler, our owner, grew up off Orange Drive near the old Davie Arena, went through the building construction curriculum at McFatter Technical College, and has been measuring, setting, and sealing in Broward County for twenty-six years now. He keeps a rule pinned on the shop whiteboard: if it is not right on paper, it will not be right in the wall. That same head is on every Mr-Glass roof we touch.

There is plenty of new construction in Davie, but the homes we get called to are the ones built in the 80s, 90s, and 2000s, where the original roof took its last serious storm and the second or third one is what failed. If a siding company or a generalist roofer has been on the roof before us, we usually find the problem began with a shortcut. We do not cut those corners. Our technicians are background-checked and uniformed, they measure every opening and every run, and they register both manufacturer warranty layers in writing when a new installation applies. But we also know Mr-Glass is not the only roof material out there. We service windows and doors from PGT, CGI, CWS, and ES Windows, so if your roof repair touches a skylight, a solar tube, or a vented gable, we can handle that in the same visit, with side-by-side quotes on paper so you see exactly what you are buying.

FAQs