Mr-Glass Roof Repair Nationwide | TruePane Windows & Doors

Mr-Glass Roof Repair in Davie: What to Know First

Mr-Glass roof repair in Davie typically runs $240 to $680 for most skylight and roof-glazing fixes, and we complete the large majority of these jobs in a single visit. TruePane Windows & Doors is an independent Mr-Glass service provider, not a factory-authorized shop, which means we make parts and repair decisions based on what will last in South Florida weather rather than what a warranty department insists on. If you own a Mr-Glass skylight, roof window, or glass roof section that is leaking, fogged, or binding, call (863) 208-5172 and a live person will answer.

Call (863) 208-5172

This page is written for the Davie homeowner who has lived with a Mr-Glass product for years and now needs it fixed correctly. Not replaced unnecessarily. Not patched with silicone and a shrug. Fixed the way Dale Kessler would fix it on his own roof.

How Mr-Glass Products Fail - and How We Fix Them

• Mr-Glass Elite Series curb-mounted skylights leak at the curb joint. Davie’s wet season pushes standing water against the curb flashing for hours at a time, and the original neoprene gasket under the skylight frame compresses and hardens after eight to ten years. We remove the unit, clean the curb, replace the gasket with a UV-stable EPDM seal, and reflash with peel-and-stick membrane before resetting the frame. The leak stops because the water never reaches the seal line.
• Mr-Glass Panorama roof windows develop condensation between the glazing layers. This is a failed edge seal, and it is the single most common call we get from Davie homeowners with Mr-Glass roof glass. The desiccant strip inside the spacer bar saturates in our humidity, and once it cannot absorb any more moisture, fog appears. We source matching insulated glass units with a thicker, low-E laminate suited to Florida sun exposure, not the northern-climate spec the unit originally shipped with.
• Mr-Glass Solarium frame members creak and shift during afternoon heat. The aluminum extrusions in older Mr-Glass solarium roofs were not thermally broken, so they expand at a different rate than the glass. Over time, the expansion cycles wallow out the screw holes at the ridge. We re-torque the structure, install stainless isolation washers, and replace any frame screws that have lost their bite. The creaking goes away because the metal is no longer moving against itself.
• Mr-Glass Vented Roof Windows bind on the operator arm. The original operator arms on Mr-Glass vented roof windows used a zinc-plated pivot that corrodes in coastal-adjacent humidity. Davie is far enough inland that salt is not the issue, but afternoon thunderstorms carry enough airborne moisture to accelerate the same corrosion. We replace the arm assembly with a stainless-pivot unit and rebalance the sash so the window opens with one hand.
• Mr-Glass ridge flashing on glass conservatory roofs separates at the seams. On Mr-Glass conservatory and sunroom roofs we see this after ten to twelve years: the overlap joints were sealed with a butyl tape that dries out and cracks under direct sun. We strip the old tape, clean the seam with solvent, apply a marine-grade butyl, and mechanically re-crimp the flashing. No silicone, no caulk-and-hope.

Our Mr-Glass Roof Repair Process

1. 1
   You call, a person answers. We ask what the unit is doing, when it started, and whether you can see water or only fog. That tells us what to bring.
2. 2
   We inspect the roof side first. Most Mr-Glass problems get blamed on the glass when the real cause is in the flashing, the curb, or the seal line. Dale’s rule applies here too: if it is not right on paper, it will not be right in the wall. We diagram what we find.
3. 3
   We price the fix in writing before any work starts. You see the parts line, the labor line, and the warranty terms. No surprise line items later.
4. 4
   We make the parts call honestly. When a Mr-Glass OEM part is available and priced within reason, we use it. When the OEM part is backordered six weeks or discontinued, we tell you that plainly and offer a quality aftermarket equivalent with the supplier named. You decide.
5. 5
   We do the repair, then water-test it. On any roof glazing job we run a hose test at the seam and flashing before we come down off the ladder. If water gets through, we are not done.
6. 6
   We register what needs registering and stand behind the work for 90 days. Our Done Right Promise means if it fails, we return and fix it. No argument about whose fault it was.

What Mr-Glass Roof Repair Costs in Davie

Here are the numbers we typically quote in Davie, based on the Mr-Glass units we see most often:

What moves the price is access. A single-story Davie ranch with a shallow roof pitch is a different job than a two-story home where the Mr-Glass unit sits over the second-floor landing. That is the honest answer, and it is why every quote comes after we look at the roof. Call (863) 208-5172 to schedule a free estimate, and we will put the number in writing before any work begins.

Why Davie Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We have been serving Broward County since 2008, and Dale Kessler grew up off Orange Drive near the old Davie Arena. This is not a franchise territory for us. It is home. When a Mr-Glass roof window fails, most contractors will offer to replace it with whatever brand they carry. We fix the Mr-Glass unit when it can be fixed, and when replacement is the honest call, we quote you Mr-Glass-compatible options alongside PGT, CGI, CWS, and ES Windows side by side on paper. The Keystone Standard means both warranty layers get registered in writing, with durations stated, before our truck leaves your driveway. And a live person answers our phone 24 hours a day, seven days a week. If the pane is not true, the job is not done.

FAQs