Mr-Glass Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Mr-Glass Custom & Geometric Windows in Davie: What to Know First

We provide independent Mr-Glass custom and geometric window installation, replacement, and repair in Davie, with most jobs measured, quoted, and scheduled within five to seven business days. Pricing is honest and fixed before we start, and we write both warranty layers down where you can see them. Call (863) 208-5172 for a free estimate and a straight answer on what your Mr-Glass windows actually need.

Call (863) 208-5172

This page is for Davie homeowners who own Mr-Glass windows, particularly shaped, arched, or oversized units, and who want a glazier that knows how this brand behaves in South Florida humidity and storms. We are an independent Mr-Glass service provider, not a factory-authorized dealer, which means our loyalty sits with your house, not a corporate approval chain.

Key Takeaways

• We repair and replace Mr-Glass custom and geometric windows in Davie, including arched, radius, round, oval, and oversized openings.
• Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before we leave the driveway.
• We stock and source OEM Mr-Glass parts when available, and use proven aftermarket components only when OEM supply runs dry.
• Owner Dale Kessler has been setting and sealing windows in Broward County for over twenty-six years.
• Free estimates. Fixed pricing. No surprise line items. Call (863) 208-5172.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass makes a solid product, but every brand has its weak spots. In Davie, where June humidity runs near ninety percent and afternoon storms roll in off the Everglades, we see the same Mr-Glass failure patterns repeat across custom and geometric units. Here is what we encounter and what we do about it.

• Radius unit seal failure at the spring line. Arched and eyebrow Mr-Glass windows carry more stress at the curve than square units do. The insulated glass unit flexes differently, and over ten to fifteen years, the seal at the midpoint of the arc gives out first. You will see fogging that starts as a crescent shape and slowly fills the glass. The fix is a measured replacement IGU, fabricated to the original radius, not a square unit forced into a curved opening. We pull a template from the existing frame before ordering so the new glass matches the arc exactly.
• Mr-Glass custom geometric frames rack out of square in stucco openings. We see this on Davie homes built in the 1990s and early 2000s, where the stucco subcontractor floated the rough opening tight to the window frame. When the wall settles and the stucco does not give, the Mr-Glass frame twists enough to bind the sash and crack the corner welds. We reset the window with proper clearance and shim points, and in severe cases we cut the stucco back and re-flash the opening. The symptom is a window that opens fine in winter and binds by August.
• OEM Mr-Glass balance and hinge hardware wears faster on oversized trapezoids. Large fixed-over-awning geometric units put all the operable hardware weight on one short hinge line. Mr-Glass hardware is quality, but on a six-foot half-round with a small awning vent, the operator and hinges do twice the work of a standard window. We replace worn OEM hardware with direct-fit parts, and where Mr-Glass has superseded the older part number, we cross-reference to the new stock so the window does not sit disabled for weeks waiting on a discontinued component.
• Weep system clogs on Mr-Glass sloped sill designs. Many Mr-Glass geometric windows use a sloped sill with narrow weep channels. In Davie, pollen, mulch dust, and the fine sand that blows in from construction sites plug those channels within a few years. Water backs up into the track, and eventually past the interior stop. We clear and rebuild the weep system during service calls, and on repeat offenders we re-drill and sleeve the channels slightly larger while keeping the exterior profile intact. This is a five-minute fix that prevents a much more expensive interior repair.
• Laminated glass delamination on Mr-Glass impact-rated geometric units. Impact glass is two panes of glass with a plastic interlayer, and on Mr-Glass radius units exposed to full morning sun on east-facing Davie elevations, we have seen early delamination at the edges. It starts as a milky border around the perimeter and spreads inward. Once delamination starts, the IGU must be replaced; there is no field repair. We order the replacement with the same interlayer specification and frame the work under the Done Right Promise so you are not paying twice for a bad first repair.

Our Mr-Glass Custom & Geometric Windows Process

If it is not right on paper, it will not be right in the wall. That is how we run every Mr-Glass job, and the process below is what you can expect when you call us in Davie.

1. 1
   Call and talk to a person. A live person answers at (863) 208-5172, day or night. We ask what the window is doing, take your address, and schedule a visit at a time that works for you. No voicemail tree, no callback form.
2. 2
   On-site diagnostic. Our uniformed technician comes out, measures the opening twice, and checks the frame, the glass, the hardware, and the installation method. We photograph what we find so you can see exactly what we are talking about. For Mr-Glass custom and geometric units, we template any curved glass rather than trusting the old frame dimensions.
3. 3
   Parts decision, on paper. We check OEM Mr-Glass parts availability first. If OEM is available, we quote it. If it is discontinued or on long backorder, we show you a proven aftermarket option side by side with the OEM, including the warranty on each. The decision is yours, in writing, before any work starts.
4. 4
   The repair or replacement. We set the window true, shim it properly, flash and seal it for South Florida weather, and install the new glass or hardware to the manufacturer’s torque and clearance specifications. Cleanup happens the same visit; we leave your house like we found it except for the window working right.
5. 5
   Warranty registration and my signature. Before the truck leaves your Davie driveway, both warranty layers are registered in writing with durations stated. I review every job personally before it closes.

What Mr-Glass Custom & Geometric Windows Costs in Davie

Honest numbers beat vague promises, so here is what Mr-Glass work typically runs in Davie. Every job is quoted in writing before we begin, and the price on the quote is the price on the bill. No surprise line items, no change orders halfway through.

Common Mr-Glass Custom & Geometric Window Pricing in Davie

• Fogged IGU replacement on a standard Mr-Glass casement or picture window: $300-$650 per unit, depending on glass size and whether it is impact-rated.
• Fogged or delaminated glass replacement on a Mr-Glass radius or arched unit: $600-$1,200 per unit. Curved glass costs more to template and fabricate than square lites.
• Hardware replacement, balance, or hinge repair on a Mr-Glass trapezoid or half-round: $150-$450 per window, parts and labor included.
• Full Mr-Glass custom geometric window replacement, including new frame and installation: $1,500-$4,500 per opening, driven by size, shape, glass package, and structural requirements.
• Stucco cutback, re-flashing, and frame reset on a settled Mr-Glass window: $500-$1,200 per window, depending on exterior finish work required.

What moves the price: whether the unit is impact-rated, the span and radius of the glass, whether the frame is salvageable or needs replacement, and whether the opening requires structural correction. Call (863) 208-5172 and we will give you the exact number for your window. Estimates are free.

Why Davie Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We are not the cheapest bid in Davie, and we will not pretend to be. We are the company you call when a previous install failed its first serious storm and you want the next one done right. Every Mr-Glass job we finish is backed by our Done Right Promise: if it is not right, we make it right, no paperwork fights, no fine print that covers neither. The Keystone Standard means both manufacturer warranty layers are registered, in writing, with durations stated, before the truck leaves your driveway.

We have been serving local communities since 2008, founded by Dale Kessler in 2008 on a principle that out-of-true installs and voided warranties were problems worth fixing permanently. Mr-Glass is one part of the picture. We also service PGT, CGI, CWS, and ES Windows, so if a Davie home mixes brands across different openings, we can handle the whole scope in one visit. Background-checked, uniformed technicians arrive on time. A live person answers the phone day and night. If the pane is not true, the job is not done.

FAQs