Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Impact Garage Doors: The Davie Owner’s Guide
We stock, match, and install ECO Window Systems-compatible impact garage doors throughout Davie. A full replacement with new tracks, hardware, and installation typically runs $2,800 to $6,200 depending on size, panel configuration, and whether you’re replacing the opener too. Most Davie homeowners discover the problem the hard way: a door that binds mid-travel, a panel that cracked when a branch hit it during a July storm, or a neighbor noticing daylight showing through the bottom seal from the street.
We’re an independent service provider, not affiliated with ECO Window Systems, but we’ve worked on enough of their doors in this market to know what fails, what holds up, and what a homeowner should not try to fix themselves.
Dale Kessler grew up off Orange Drive, learned the trade at McFatter Technical College, and has spent twenty-six years measuring and setting windows and doors in Broward County. If it is not right on paper, it will not be right in the wall.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds impact garage doors across three main lines: their standard wind-rated series, their High Velocity Hurricane Zone (HVHZ) approved series, and select custom-width models for older Davie homes with non-standard openings. The compatibility gotcha we see most often: the service tags on ECO doors are on the inside face of the right-hand stile, and sunlight through the window lites fades them to unreadable within four or five years. Homeowners hand us a pricey part they ordered online, only to find it doesn’t match the original spec.
If you can’t read the tag, measure the panel thickness and count the reinforcement ribs. ECO’s standard panels run 1-3/8 inches thick; their HVHZ panels measure 2 inches. Rib count tells us the series: five ribs on the standard line, seven on the heavier wind-rated panels. We carry both OEM ECO parts and quality aftermarket equivalents that match or exceed the original spec, and we’ll put both options on paper with honest pricing before we order anything.
Most replacement calls in Davie involve the spring system, panel hinges, or bottom seal. We also stock parts for PGT, CGI, and CWS doors when an ECO door shares hardware with one of those lines, which happens more than you’d expect.
Signs Your ECO Window Systems Impact Garage Doors Is Failing
- Door binds or jerks when opening. A rusted roller or a worn hinge pin catches on the track and forces the motor to work harder. Left alone for a few more weeks, it burns out the opener.
- Gap under one corner when closed. The bottom seal has compressed unevenly, or one cable has stretched so the door no longer sits square. Water and leaf debris find that gap fast in a Davie afternoon storm.
- Cracking sound when the door operates. Most often a torsion or extension spring approaching the end of its cycle life. Springs under tension fail suddenly, and the sound you hear when one goes is unforgettable.
- Panel impact damage from storm debris or a backed-in truck. ECO panels are designed to take a hit and stay in place, but once the laminate is compromised, moisture wicks in and the panel starts to swell and delaminate.
- Sagging at the center when open halfway. A fatigued spring or a stretched cable. The door gets heavier every month, and the motor notices even if you don’t.
Replacement Cost & What’s Included
In Davie, a complete ECO Window Systems-compatible impact garage door replacement runs $2,800 to $6,200 installed. The spread comes from panel width and height, insulation R-value, window lite count and type, and whether you want a new opener fitted to the new door’s weight. A door alone with no opener starts around $1,900 for single-car widths; a double-wide HVHZ-rated door with insulated glass and a new opener lands at the top of the range.
What you get for that: a written line-item quote on paper, both manufacturer warranty layers registered in writing before our truck leaves the driveway, and the Done Right Promise. If the finished job is not square and smooth, we make it right without paperwork fights. No surprise line items on the bill. Pricing is agreed before we touch a bolt.
| Service | Typical Davie Price Range |
|---|---|
| Spring replacement (pair) | $290 - $520 installed |
| Bottom seal replacement | $120 - $210 installed |
| Panel replacement | $450 - $1,300 per panel, depending on size and glass |
| Full door replacement (single-car) | $2,800 - $4,100 installed |
| Full door replacement (double-car, HVHZ) | $4,400 - $6,200 installed |
DIY or Call Us?
Garage door springs, whether torsion or extension, hold enough tension to cause serious injury or death if they release while you are close to them. We will not walk you through a spring replacement, and no responsible tradesperson will. The brackets, cables, and winding cones are under load every second the door is closed, and one slipped winding bar is all it takes.
What you can safely inspect: the bottom seal for cracks or compression, the roller condition by watching the door run, and the balance of the door by disconnecting the opener and lifting it halfway manually. If the door won’t hold position halfway, the springs are done. Call our technicians for that one. We’re at (863) 208-5172, and a live person answers the phone every time.
FAQs
In Davie’s humidity and salt air, expect 15 to 20 years from the panels and 7 to 10 years from the springs and seals. The panels themselves hold up well; it’s the hardware that cycles out first. Call (863) 208-5172 and we’ll give you an honest assessment of what’s still serviceable.
Small dents and paint chips can be filled and refinished, but once the laminate is cracked or the steel has torn, the panel is compromised and should be replaced. A patched impact panel will not perform the same in the next storm. Call (863) 208-5172 for a straight answer on whether your panel can be saved.
A full door replacement typically takes 4 to 6 hours on site, including tear-out of the old door, fitting the new panels, setting the tracks, and testing the balance. Most Davie jobs are completed in a single visit. Call (863) 208-5172 to schedule your free estimate.
We carry the most common ECO springs, hinges, rollers, and seals on our service trucks, and we can order panels and full door assemblies within a few business days. If it’s a part we stock, we install it the same visit. Call (863) 208-5172 and we’ll tell you over the phone what fits your door before we ever roll out.
Call (863) 208-5172 for a free estimate on your ECO Window Systems impact garage door. We’ll measure twice, quote both OEM and aftermarket options on paper, and register every warranty layer before we leave your driveway. Serving Davie and nearby areas with the Done Right Promise on every job.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.