Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Roof Replacement & Installation in Davie: What to Know First
ES Windows roof replacement and installation in Davie typically runs $1,450 to $3,800 per opening depending on the series, glass package, and structural condition of the surrounding frame. Most ES Windows jobs in Davie take one full day once the product arrives, though custom orders with laminated glass or triple-pane configurations can stretch lead times to four or six weeks. We are an independent ES Windows service provider, not a factory outlet, and our price posture is simple: you’ll see the full number before we order anything, and it won’t change when the truck pulls up.
This page is written for ES Windows owners in Davie who are dealing with a leak, a failed seal, a crank that binds, or a full replacement after a storm. If you own ES Windows and the roof is involved, the stakes are higher than a standard window swap because water travels. Call (863) 208-5172 and we’ll talk through what you’re seeing before we ever schedule a site visit.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a product we respect. But every window line has its tells after a few years in South Florida, and ES Windows is no exception. Here is what we see in Davie homes, house by house.
- ES Aspen series weep-hole blockage at the sill track. The Aspen line has narrow drainage channels that clog with pollen and fine sand during Davie’s dry April winds. Water backs up, spills over the interior dam, and rots the sill plate under the window. We pull the sash, clear the channels, adjust the slope, and reseal the exterior flange before the water reaches the framing. If the sill is already soft, we replace it while the opening is open.
- ES Sierra fixed-picture frame seal failure along the bottom edge. The Sierra series uses a butyl seal that breaks down faster in direct western exposure, which means homes off Griffin Road with that afternoon glare get fogged glass earlier than shaded lots. The fix is a glass replacement with a new desiccant-filled spacer, not a smeared attempt to reseal from outside. We measure the IGU, order it to the sixteenth, and set it so the argon doesn’t weep out of a stressed corner.
- ES Cascade casement crank gears stripping at the operator arm. Cascade operators are undersized for the panel weight, and ten years of daily use in a humid climate wears the brass gear teeth smooth. You hear a click, the window won’t close tight, and the first sign is a whistle during summer storms. We replace the operator with a heavier aftermarket unit that fits the ES cutout and set the arm travel so the sash seats flush against the weatherstrip. No shims, no more whistle.
- ES Tundra sliding door panel drift and lock misalignment. The Tundra slider is popular in Davie’s older ranch homes for the wide sightline, but the adjustable rollers loosen over time. The panel sags a quarter inch, the lock bolt misses the keeper, and the door seals only at the top. We pull the door, rebuild the roller assembly, and shim the track so the panel glides without dragging. Ten minutes of tuning beats a burglary.
- Improper original install with roof-flashing conflicts. More ES Windows failures in Davie trace back to the original install than to any factory defect. A previous crew may have run roofing underlayment up the wrong side of the window flange, or flashed the head incorrectly. When replacing an ES window, we cut back the roofing material, flash the perimeter correctly, and integrate the window pan flashing with the roofline so water has a path away from the opening, not into it. If the original flashing was wrong, no window will ever be right.
Our ES Windows Roof Replacement & Installation Process
A Davie roof replacement with ES Windows in the mix is a sequence, not a single appointment. Here is the order we follow, and why each step exists.
- 1
Site call and measurement. We come to the house, measure every opening that touches roofline or flashing, and check the condition of the surrounding framing. We also look at how the existing roof drains, because that tells us whether the window itself is the failure or the water is getting in elsewhere and finding the window as an exit.
- 2
Written line-item quote with both paths. We price the ES replacement three ways: OEM glass and hardware, a quality aftermarket package that meets or exceeds the original spec, and the trim-kit option if your frames remain sound. The numbers are on paper, side by side, so you can see exactly what changes. If it is not right on paper, it will not be right in the wall.
- 3
Product order and lead-time management. For ES Windows, lead time depends on glass package and custom dimensions. We track the order with the supplier, not with a web portal, and we call you when the truck actually arrives in Florida, not when the factory prints a shipping label.
- 4
Removal, structural inspection, and opening repair. We pull the old unit carefully, because what’s underneath tells the real story. Rotted sill plates, failed flashing tape, termite-kicked corners. We repair the opening before we set the new window. A new window in a bad opening is a bad install with a longer warranty.
- 5
Set, flash, seal, and trim. The new unit goes in level and square, with shims where the frame needs them. We flash the head, the sides, and the sill pan so water moves away from the opening. Then we seal the exterior and set the interior trim so it matches the rest of the room.
- 6
Test, clean, and register the warranty. We run the window through its full travel, check the seal with a moisture meter on the interior drywall, and clean the glass. Before we leave, the warranty paperwork is registered in writing and your copy is in your hand. If something isn’t right, it comes back on our truck, not on your phone bill.
What ES Windows Roof Replacement & Installation Costs in Davie
Here are real numbers for the most common ES Windows scenarios in Davie, based on the work we’ve done in this area over the last several years.
| Job | Typical Range | What Moves the Price |
|---|---|---|
| Single ES Aspen replacement (standard glass) | $1,450-$2,100 | Glass package, frame condition, access |
| Single ES Sierra fixed-picture replacement (LOW-E, argon) | $1,250-$1,800 | IGU thickness, existing framing |
| ES Cascade casement replacement with operator rebuild | $1,600-$2,400 | Hardware damage, panel weight |
| ES Tundra sliding door, full replacement | $2,800-$3,800 | Panel size, track condition |
| Roof replacement with ES Windows flashing integration (per opening) | $350-$600 | Flashing complexity, roofing material type |
Two things shift these numbers in Davie. The first is the condition of the opening: if the prior install failed and water sat in the framing, repair labor goes up. The second is glass package: laminated storm glass costs more than standard annealed, and it should, because it does a different job in a hurricane. We do not pad pricing with surprise line items. The estimate is the number, and the number holds. Call (863) 208-5172 for a written quote, free.
Why Davie Homeowners Call TruePane Windows & Doors for ES Windows Work
We have been setting and sealing windows in Broward County for over forty-two years, and the same families keep calling back because we do what the last crew said they’d do. Every ES Windows job carries our Done Right Promise: if it’s not right, we make it right, no paperwork fights. Both manufacturer warranty layers get registered in writing before the truck leaves the driveway. And when we’re on a Davie ES Windows job, we know the backup options too: PGT, CGI, CWS, and ECO Window Systems are all lines we install, compare, and stand behind. That matters when an ES series has a long lead time or when the better answer for a specific opening is a different glass package. Dale Kessler has been measuring and setting windows in Davie for twenty-six years, and he still walks every job personally. Our founder grew up off Orange Drive near the old Davie Arena and trained at McFatter Technical College, so when we say we know how a Davie roofline behaves in an August downpour, we mean it.
FAQs
No, we are an independent ES Windows service provider, not an authorized ES Windows dealer or factory outlet. That distinction works in your favor: we’re not tied to one manufacturer’s catalog, so we can tell you plainly when an OEM ES part is the right call and when a better aftermarket option exists. During a roof replacement, you want that honesty more than a brand badge. Call (863) 208-5172 with the model number from the corner of your ES Window, and we’ll tell you what we’d do.
A standard ES Windows replacement in Davie takes one full day on site once the product is in our hands. Custom-sized or laminated-glass orders add about four to six weeks for factory lead time. The roof-flashing integration work itself usually adds two to four hours per opening. Call (863) 208-5172 to confirm the lead time for your specific series and glass package.
Not when the work is done correctly. As an independent ES Windows service provider, we register both warranty layers in writing after every install, and we document the removal and re-flashing process so the warranty record is clean. We won’t do a band-aid repair and hand you a voided warranty slip. If you’re concerned, call us with the window type, and we’ll walk you through exactly what the warranty covers and what it doesn’t before you spend a dollar.
Repair is the right call when the failure is isolated: a single gear, a seal, a roller assembly. Replace when the frame itself is fatigued, the glass IGU has blown, or the original install leaked badly enough to damage the surrounding decking. The honest line we use in Davie is this: if the repair buys less than three years, replacement is cheaper in the long run. Call (863) 208-5172 and we’ll give you the real recommendation, not the one that makes us the most money today.
Yes, we install and service PGT, CGI, CWS, ECO Window Systems, and more than a dozen other manufacturer lines alongside ES Windows. During a roof replacement, you may need mixed-brand solutions: ES Windows on the gable, PGT on the impact-rated side wall, CGI on the door. We quote them all on paper, side by side, so you see exactly what each option costs. Call (863) 208-5172 to get that quote started today.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.