Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Roof Replacement & Installation in Davie: What to Know First
CWS roof replacement and installation in Davie typically runs between $8,500 and $22,000 depending on the roof system, square footage, and whether we’re addressing underlying decking or flashing failures. We complete most CWS roof jobs in two to five working days once materials land, and we quote fixed pricing before the first nail goes in. If you own a CWS product and you’re reading this because something has failed or you’re planning a replacement, call (863) 208-5172 and we’ll schedule a free estimate with someone who actually knows the CWS lines installed across Broward County.
This page is for Davie homeowners who bought a CWS roof system, lived with it through enough Florida summers to know what it does well and where it gives up, and now need straight answers about replacing or reinstalling it correctly. We’re an independent CWS service provider, not a manufacturer-authorized dealer, and we think that independence matters when it comes to telling you the truth about what’s failing and why.
How CWS Products Fail - and How We Fix Them
- CWS standing seam panels lifting at the lap joints. We see this most often on older CWS architectural standing seam roofs in western Davie, especially around Shenandoah and Imagination Farms. The cause is usually thermal expansion combined with fasteners that were overdriven during the original install. The panel tabs fatigue, the laps open slightly, and wind-driven rain finds its way in. Our fix is removing the affected panels, resetting them with correctly torqued clips, and re-seaming. We don’t caulk over the problem and call it done.
- CWS tile roof underlayment breakdown at the eaves. On CWS concrete and clay tile systems, the visible tile often looks fine while the underlayment beneath has turned to powder along the eave lines. Davie’s afternoon thunderstorms push water sideways, and once the underlayment goes, the decking starts absorbing moisture. We lift the tile, replace the underlayment with a high-temp rated synthetic, and reset every tile we touched. If the decking has rot, we replace that before anything else goes back on.
- CWS metal roof penetration flashings failing around vents and pipes. The roof itself holds up, but the penetration boots CWS used on certain production runs degrade faster than the panel coating. We see cracked boots and rusted collars on homes off Stirling Road and Flamingo. Rather than patch with a tube of sealant, we pull the old boot, inspect the decking underneath, and install a new lead or EPDM boot that outlasts what was there before.
- CWS shingle systems with granule loss concentrated on the south-facing slopes. Broward County sun is unkind to any asphalt product, but we notice it faster on CWS shingle lines installed without adequate attic ventilation. The granules go first, then the fiberglass mat starts showing through. The homeowner sees a roof that’s ten years old and looks thirty. When we replace, we correct the ventilation as part of the job so the new roof isn’t fighting the same battle from day one.
- CWS roof-to-wall flashing gaps at sidewalls and chimneys. This is the one that surprises people. The roof membrane itself is fine, but the step flashing against stucco walls wasn’t counterflashed properly at install. Water gets behind the stucco and travels down. We open the wall line, install proper step and counter flashing, and re-seal so the transition actually sheds water the way it should.
Our CWS Roof Replacement & Installation Process
Here’s how a CWS roof job runs with us, from the first call to the final walkthrough.
- 1
Call and schedule the estimate. A live person answers at (863) 208-5172. We set a time that works for you, and the estimator shows up with a ladder, a moisture meter, and a notepad.
- 2
Full roof inspection and moisture scan. We walk the roof, check the decking from the attic side where accessible, and identify every penetration, valley, and transition. We’re looking for what failed and what’s about to fail. You get the findings in plain language, not a scare list.
- 3
Fixed written quote with materials spelled out. We put the roof system, underlayment, flashing, ventilation, and labor in writing. No allowances, no “we’ll see when we open it up.” If we find hidden decking damage during tear-off, we show you photographs before we change a single number.
- 4
Tear-off, decking repair, and dry-in. We strip the old CWS system, repair or replace any compromised decking, and get the roof dry before any new material is laid. Every opening is sealed the same day it’s opened.
- 5
Installation of the new roof system. Panels, shingles, or tile go on per manufacturer spec, with correct fastening patterns and clip spacing. Every penetration gets new flashing. Ventilation gets corrected if the old system was cooking itself.
- 6
Final inspection and cleanup. We walk the roof with you, show you the finished work, and register the manufacturer warranty in writing before we leave. Our workmanship is covered by our Done Right Promise. If it wasn’t done right, we come back and make it right. No paperwork fight, no arguing.
What CWS Roof Replacement & Installation Costs in Davie
Here are honest ranges for the CWS jobs we handle most often in Davie. These include materials, labor, tear-off of the existing system, and disposal.
- CWS asphalt shingle roof replacement: $8,500 to $14,000 for a typical Davie single-story home with standard decking.
- CWS standing seam metal roof replacement: $16,000 to $26,000 depending on panel gauge, seam type, and roof complexity.
- CWS tile roof reset and underlayment replacement: $9,000 to $18,000 depending on how much tile must be lifted and whether replacement tile is needed.
- CWS roof-to-wall flashing repair (targeted, not full replacement): $1,200 to $3,500 depending on linear footage and stucco repair.
What moves the price: roof pitch and accessibility, decking condition, ventilation corrections, and whether your old CWS system was installed over a previous roof that also has to come off. We give you a fixed number before we start, and that number is the number on your bill. Call (863) 208-5172 for an exact quote. Estimates are free.
Why Davie Homeowners Call TruePane Windows & Doors for CWS Work
Dale Kessler grew up off Orange Drive near the old Davie Arena and learned the building trades at McFatter Technical College before spending twenty-six years measuring, cutting, and sealing in Broward County. That matters because a CWS roof replacement is only as good as the transitions where roof meets wall, window, and flashing. We’ve seen what Florida weather does to those transitions when they’re done wrong. When a CWS system isn’t available or isn’t the right call for your house, we install and service PGT, CGI, ES Windows, and ECO Window Systems, so you get a straight recommendation rather than a brand loyalty pitch. Every job carries our Done Right Promise. If the work isn’t right, we fix it, and you won’t have to argue with us to get us back. That’s the standard we’ve kept since 2008 serving local communities. If it is not right on paper, it will not be right in the wall.
FAQs
A roof replacement done by a licensed contractor using materials installed to manufacturer spec does not void the roof system warranty. What voids warranties is improper installation, unapproved modifications, or work done by unlicensed crews that the manufacturer can point to as the cause of failure. We document every step of the job and register the new manufacturer warranty in writing before we leave the driveway. Call (863) 208-5172 and we’ll walk you through what’s covered and what isn’t.
Sometimes yes, sometimes no. CWS product lines change over the years, and a panel or tile profile from twelve years ago may be discontinued. If we can source matching material, we’ll do a partial replacement and make the transition as clean as possible. If we can’t, we’ll tell you straight and give you options rather than installing a mismatched patch that looks like a repair and fails like one. Call (863) 208-5172 and we’ll inspect your roof and check material availability before you commit to anything.
Most full CWS roof replacements in Davie take two to five working days once materials are on site. Tile resets and partial repairs run shorter, typically one to three days. Weather can stretch that window, and we’ll keep you informed rather than leaving you guessing. Call (863) 208-5172 and we’ll give you a schedule we actually keep.
If the roof is under ten years old and the problem is isolated, a targeted repair usually makes sense. If you’re chasing leaks in multiple locations, seeing granule loss across large sections, or the underlayment has failed, replacement costs less than repeated repairs over the next five years. We’ll show you the numbers both ways and let you decide with the facts in front of you. Call (863) 208-5172 for an honest assessment, free of charge.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After