Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Repair in Davie: What to Know First
CGI roof repair in Davie is specialized work that most general contractors get wrong. We repair CGI roof glazing, skylights, curb-mounted units, and the flashing systems that seal them, with most jobs completed in one or two visits depending on parts availability. A typical repair runs between $375 and $1,850 in this market, and we give you a written line-item quote before any work begins. If you own a CGI product that’s leaking, fogged, or showing seal failure around the roof line, call (863) 208-5172 and a live person will answer. This page is for Davie homeowners who want the repair done correctly the first time, by techs who understand how CGI’s aluminum frames and laminated glass behave in South Florida heat and hurricane season.
How CGI Products Fail - and How We Fix Them
CGI builds a serious impact product, and when it fails at the roof line, the cause is usually traceable to installation shortcuts, aged sealant, or a curb that was never flashed to begin with. Here are the failure modes we see most often on Davie roofs:
- Sentinel and Estate Series skylight seal failure. The laminated glass unit itself rarely fails first. What fails is the silicone bead between the frame and the curb, especially on south-facing exposures in Davie where UV breaks down even high-grade sealant within eight to twelve years. We remove the old bead mechanically, prime the substrate, and recaulk with a commercial-grade sealant rated for aluminum-to-concrete contact.
- Curb-mounted CGI roof windows leaking at the corners. This is common on older Davie homes where the original roofer built a wooden curb and never installed a proper metal pan underneath. The leak shows up at the inside corner of the window, but the water is entering at the curb corner and traveling. We rebuild the curb, set a soldered or membrane pan, and reset the CGI unit to drain outward instead of inward.
- Fogged insulated glass in CGI roof glazing after a storm. A hairline crack or a failed edge seal lets Florida humidity into the airspace, and once that happens, the unit fogs permanently. CGI roof units use laminated interlayers that hold the glass together, which is why a cracked lite does not shatter into the room, but the fog will not clear on its own. We source replacement IGUs matched to the original thickness and interlayer spec.
- CGI operable skylight arm and hinge wear. On CGI operable roof units, the lifting arms use a friction mechanism that gradually loosens in the heat, and eventually the vent panel will not stay open or will not close flush. The repair is a hinge assembly replacement and track realignment, not a whole new unit. We see this on Estate Series operables that are opened daily for ventilation in the fall and winter months.
- Condensation inside the frame channel overnight. If you wake up to water beading inside the aluminum channel of a CGI roof window but no visible leak, the weep system is clogged. CGI frames are engineered to drain water through a series of small weep holes at the lowest point of the frame. In Davie, pollen, dust, and milled aluminum corrosion byproducts clog those holes within a few years. We clear them, verify the drainage path, and touch up any protective coating that has worn off.
Each of these has a fix that lasts, provided the person doing the work knows where the water actually enters. That is not always where the stain appears.
Our CGI Roof Repair Process
We do not patch and hope. We find the entry point, document it, and repair it to the manufacturer’s structural intent. Here is how a CGI roof repair runs with our crew:
- 1
Call and scheduling. You call (863) 208-5172, a live person answers, and we set a time. We’ll be there when we say.
- 2
Roof-side diagnostic. A uniformed, background-checked tech photographs the unit, checks the sealant lines with a moisture meter, and traces the water path before touching anything.
- 3
Written scope and pricing. You get a line-item quote on paper. If parts are needed, we show you the OEM price and any equivalent aftermarket option side by side, with the differences stated plainly.
- 4
The repair. We remove the failed components, prep the surfaces, and install the new sealant, flashing, hinge, or glass unit. Every opening is measured twice, and both warranty layers are registered in writing before we leave your driveway.
- 5
Water test and inspection. We simulate rainfall across the repaired area, verify the drain path, and photograph the completed work for your records.
- 6
The Done Right Promise. If anything we touched fails within 90 days, we come back and make it right. No paperwork fight, no arguing.
What CGI Roof Repair Costs in Davie
Honest numbers, based on what we have billed on Davie roofs over the last several years:
- Sealant rebead around one skylight or roof window: $375-$650
- Curb rebuild with metal pan, one unit: $900-$1,600 depending on curb size and roof deck condition
- Replacement IGU for a fogged CGI lite: $700-$1,400 depending on size and interlayer spec
- Operable hinge and arm assembly replacement: $450-$800 per unit
- Weep system clearing and frame channel service: $175-$350 when the unit is otherwise sound
What moves the price is roof access, curb condition, and whether we need a boom lift or can work from the roof surface. A two-story Davie ranch with a 6/12 pitch costs more to work on than a single-story flat roof. Call (863) 208-5172 for a free written estimate, and you will know the number before you commit to anything.
Why Davie Homeowners Call TruePane Windows & Doors for CGI Work
We are an independent CGI service provider, not a manufacturer arm, which means our recommendation is based on what your roof actually needs, not what the factory would prefer to sell you. That matters when the honest answer is a $600 rebead instead of a $4,000 unit replacement. Dale Kessler grew up off Orange Drive near the old Davie Arena and trained at McFatter Technical College before running building construction jobs all over Broward County, so he knows what Davie heat, hurricanes, and wood-framed roofs do to aluminum and glass over twenty years. And if a CGI unit truly is beyond saving, we can quote you side by side across PGT, CWS, ES Windows, and ECO Window Systems so you see every option on paper and make the call yourself.
All of it is covered by the Keystone Standard: both warranty layers registered in writing, durations stated, and the Done Right Promise if we miss. If it is not right on paper, it will not be right in the wall.
FAQs
Not if the repair is done correctly with compatible materials and the work is documented. We photograph every step, use sealants and components that meet or exceed CGI’s specs, and register both warranty layers in writing before we leave the driveway. If a future warranty claim ever comes up, you will have a paper trail showing the work was done to standard. Call (863) 208-5172 and we’ll walk you through what your specific unit carries.
Most sealants, hinges, and flashing materials are on our trucks or available locally same-week. Replacement glass units for CGI roof products typically take one to three weeks depending on size and interlayer spec, because they are built to order, not stocked on a shelf. We will tell you the timeline before you pay for anything, and we will not leave a roof opening unprotected while we wait. Call (863) 208-5172 for an exact lead time on your unit.
No. On most CGI roof windows, the frame and curb are still sound when the IGU fogs, so replacing only the insulated glass unit is the correct repair and costs a fraction of a full replacement. We will measure the lite, match the interlayer and glass thickness, and set the new unit into your existing frame. Call (863) 208-5172 and we will tell you if your fogged unit is a candidate for glass-only replacement.
We pull permits when the job requires them and pass every inspection before we call the work done. A rebead or weep-system service usually does not trigger a permit in Davie, but a curb rebuild or structural flashing repair often does, and we handle it from start to finish. You will never be asked to pull your own permit on work we performed. Call (863) 208-5172 if you want to know whether your repair falls under permit requirements.
No. The quote we give you on paper is the price you pay, unless we uncover something structural while we are in the opening and you approve a written change in scope before we proceed. Roger that. What we have never done is hit a homeowner with surprise line items at the end of a job. Call (863) 208-5172 for a free estimate and we’ll put the number in writing before you decide anything.
Ready to get your CGI roof product fixed the right way? Call (863) 208-5172 today and a live person will answer. We’ll schedule your free estimate, walk the roof with you, and give you a written quote you can take to the bank. TruePane Windows & Doors is local, independent, and has been keeping Davie homes watertight since 2008. We’ll be there when we say.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.