CGI Impact Garage Doors Nationwide | TruePane Windows & Doors

CGI Impact Garage Doors: The Davie Owner’s Guide

We stock and install CGI impact-rated garage doors and replacement sections for Davie homes, with most complete door replacements running between $3,800 and $7,200 installed depending on size and series. We typically schedule Davie installs within five to seven business days, and we keep the most common CGI replacement hardware and weatherstripping on our trucks. Most homeowners call us after a storm season reveals a door that no longer seals tight, a section that bowed, or hardware that makes a sound it didn’t make last year. Here’s what you need to know before you spend a dollar.

Call (863) 208-5172

Key Takeaways

• CGI impact garage doors are engineered to meet Miami-Dade and Broward County wind-load codes, not just Florida Building Code minimums.
• OEM CGI replacement sections are ordered directly from CGI and matched to your door’s original color code and panel profile.
• Impact-rated garage doors in Davie need annual hardware checks because our heat and humidity cycle the springs and rollers harder than inland climates.
• We are an independent service provider, not a CGI corporate entity. That means we quote honestly and fix what we find.

Which CGI Models This Applies To

CGI builds impact garage doors in a few distinct series lines, and the series matters when you’re matching a replacement section or hardware. The most common lines we service in Davie include the 9000 Series (aluminum full-view), the 1200 Series (insulated steel raised panel), and the 8700 Series (flush panel, often on newer builds). Each series uses different panel thicknesses, glass lite profiles, and hardware spacing, so a panel from a 1200 will not seat correctly in a 9000 opening even if the measurements look close on tape.

To identify what you have, look inside the top section on the end stile. CGI stamps a small metal label with the series number, wind-load rating, and manufacturing date. If that label is faded or painted over, measure the panel thickness and count the lites. A full-view aluminum door runs about 2 inches thick with visible glass lites edge to edge. An insulated steel section runs 1 3/4 to 2 inches with a steel skin over foam core.

The OEM versus aftermarket question is simpler with garage doors than with windows. For glass lites and glazing beads, aftermarket equivalents work fine when the dimensions are exact. For stiles, top and bottom channels, and spring assemblies, we order OEM from CGI. Dale Kessler’s rule is this: if the part carries wind-load rating and sits in the load path, it comes from the manufacturer that tested it. If it’s a wear item like a roller or weatherstrip, quality aftermarket does the job.

Signs Your CGI Impact Garage Doors Is Failing

• The door binds or jerks in the tracks. This usually points to a roller starting to seize or a track that shifted out of plumb. In Davie, the constant moisture intrusion around the garage slab can shift a track over years, and forcing the door open accelerates the wear.
• You can see daylight through the door when it’s closed. On an impact door, that gap means the bottom seal or side weatherstrips have compressed to the point of failure. Florida wind drives rain through gaps you cannot see, and a compromised seal is how garage drywall gets mold.
• A section has a visible bow or wave when closed. Impact sections are engineered to stay rigid under wind load. When one shows a permanent bow, the section has taken a hit and released, and that section’s structural value is done. A full door that carries a wind-load rating depends on every section doing its job.
• The door groans or pops at the springs when opening. Cycle count matters. A typical spring set on a Davie door opens and closes two to four times daily. At 5,000 cycles per year, a standard spring is nearing its lifespan in eight to ten years. The groan is the spring telling you it is about to let go.
• The bottom section is rusting at the steel skin seam. CGI steel sections carry a rust-through warranty, but lake-adjacent Davie properties with irrigation overspray see the bottom section go first. Rust at the seam is a sign that water has found the interior, and that section needs replacing, not patching.

Replacement Cost & What’s Included

In Davie, a full CGI impact garage door replacement runs between $3,800 and $7,200 installed for a standard two-car opening. A single replacement section, ordered OEM to match your door, typically runs $900 to $1,600 installed depending on the series and whether glazing is involved. Spring, roller, and weatherstrip service work runs less, and that is worth saying plainly: if the door sections are sound, the fix is hardware, and the hardware fix is usually a few hundred dollars.

What drives the range on a full door is the series, the size of the opening, and whether the door has glass lites. A full-view 9000 Series on a 16-foot-wide opening is the top of the range. An 8700 flush steel door on a standard 9-foot-wide opening is at the bottom. We price parts and labor separately on every quote, and the estimate you get is the price you pay unless we open the opening and find something structural that changes the job. At that point we stop, we show you, and we write a new number before we go further. We register the CGI warranty in writing and stand behind our workmanship for 90 days under the Done Right Promise.

DIY or Call Us?

There are things a homeowner in Davie can honestly check. You can inspect the tracks for debris, test the auto-reverse sensors, and look at the weatherstripping with a flashlight. You should not touch the springs. A torsion spring carries enough tension to break bones or worse if it releases, and on an impact door that spring has been sized for a heavier panel load than a standard door. If the springs are the problem, call us. If a section is bowed, that is a two-person job on an equally weighted door, and the section has to come down without twisting the track.

The smart play is to call us and have us put eyes on the door. We will tell you plainly if the fix is a part we can replace that afternoon or a door that needs ordering and a scheduled install. Call (863) 208-5172 and we’ll set a time to look.

FAQs