Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Sliding Glass & Patio Doors in Davie: What to Know First
CGI sliding glass and patio door repair in Davie typically runs between $185 and $1,400 depending on whether we’re replacing rollers, realigning a panel, swapping damaged weatherstripping, or rebuilding a jamb that’s been soaking up Florida humidity for fifteen years. Most CGI door jobs in Davie are completed in a single visit because we keep common CGI hardware on the truck and know which parts cross over from other lines. You won’t get a vague “we’ll see when we open it up” quote from us. You’ll get a written price before we start and a call answered by a person when you dial (863) 208-5172.
This page is for Davie homeowners who own CGI sliding glass or patio doors, who have lived with them long enough to know how they act in August, and who want the work done right the first time. We’re an independent CGI service provider. That means we work on these doors every week, but we don’t answer to CGI’s corporate sales targets. We answer to you and to the door in front of us.
How CGI Products Fail - and How We Fix Them
CGI builds a strong door. But every product line has a personality, and after twenty-plus years of working on them in Broward County, here’s what we see on CGI sliding glass and patio doors in Davie specifically:
- Roller failure on Estate and Targa series sliders. The original rollers are steel wheels on steel axles with no real shielding against the sandy grit that blows through Davie year-round. Once the bearing seal gives out, grit gets in and the wheel stops rolling. It grinds. That’s the sound owners describe as “the door got heavy.” We replace with sealed stainless rollers that outlast the originals and adjust the panel so it rides level in the track.
- Weep hole blockage causing track rot. CGI designs its sliding door tracks with weep holes to drain rainwater, but after a few years of Davie leaf litter and dirt, those holes plug. Water sits in the track, the aluminum corrodes, and the track starts to fail. We clean the drainage path, repair the corrosion, and if the track is too far gone we order a replacement section rather than patch over rot.
- Misaligned interlock on double-panel sliders. On CGI’s two-panel patio doors, the interlock where the panels meet is the first spot to wear. When the panels drift out of square, you’ll see daylight through the seam or feel a hard catch when locking. We realign the panels, replace the interlock weatherstripping, and set the door back to square. If it is not right on paper, it will not be right in the wall.
- Roller adjustment screw corrosion on older CGI models. Some CGI sliders from the early 2000s use a zinc-plated adjustment screw at the bottom of each panel. In Davie’s humidity, those screws seize and spin out. An owner who tries to adjust the door themselves strips the head and then the panel won’t move at all. We remove the seized screw properly, retap the thread if needed, and install a corrosion-resistant replacement.
- Track cap splitting on impact-rated patio doors. The vinyl track cap on some CGI impact sliders gets brittle under direct sun. When it splits, the door drags and the cap leaves a sharp edge. We replace the cap with current-production material that holds up better, then test the door through a full open-close cycle before we call it done.
OEM vs Quality Aftermarket Parts
For warranty-safe work on CGI doors still under the manufacturer’s coverage, we source OEM parts and register any work in line with the warranty terms. For older doors where the warranty has run out, we’ll offer the choice: OEM parts for a higher price, or a quality aftermarket part that often lasts longer than what the door shipped with. We show you the difference on paper, with prices, before we touch anything.
Our CGI Sliding Glass & Patio Doors Process
Here’s what happens when you call us about a CGI door in Davie:
- 1
You call, a person answers. Every call comes to us, not a call center. We ask what the door is doing, and we schedule a time that works. We’ll be there when we say.
- 2
The technician measures twice. On arrival, our tech checks the door’s level, square, and alignment before touching hardware. We measure the opening, not just the visible problem.
- 3
We lay out the diagnosis in plain language. You hear what failed, what caused it, and what it takes to fix it properly. We’ll point at the part, not just describe it in abstract terms.
- 4
The parts decision gets made together. OEM or aftermarket, your call, with prices in writing. Then the repair starts.
- 5
The door is repaired, adjusted, and cycled repeatedly. We don’t just replace a roller and walk away. The door gets tested through full travel, lock engagement, and weather seal contact. If the panel doesn’t glide, we keep working until it does.
- 6
We clean up and stand behind the entire job. The Done Right Promise applies to every CGI repair we do. If something’s not right, we come back and make it right without a paperwork battle.
What CGI Sliding Glass & Patio Doors Costs in Davie
Most Davie homeowners will see these numbers for common CGI sliding door and patio door work:
- Roller replacement, single panel: $185 to $340 depending on the series and access
- Track cleaning, weep hole clearing, and alignment: $145 to $260
- Interlock weatherstripping replacement: $90 to $180
- Track repair or replacement section: $400 to $1,400 depending on extent of corrosion and whether the frame requires disassembly
- Full panel removal, deep cleaning, and rebuild of hardware: $500 to $900
What moves the price: door age, whether parts are OEM or aftermarket, how much corrosion has built up, and whether the panel needs to come out of the opening. We give written line-item quotes. No surprises on the bill. Call (863) 208-5172 for a free estimate.
Why Davie Homeowners Call TruePane Windows & Doors for CGI Work
Because we’ve been working on Broward County doors for going on twenty-six years, and by now we’ve learned exactly what Davie’s heat, humidity, and thunderstorms do to a sliding door. Dale Kessler grew up off Orange Drive near the old Davie Arena and trained at McFatter Technical College. He’s the one who set the standard we work to: every CGI door we touch gets both warranty layers checked and registered in writing, the workmanship guaranteed for 90 days, and a door that slides square when we leave.
We also service PGT, CWS, ES Windows, and ECO Window Systems, which matters for the Davie homeowner whose house has a mix of brands across different openings. One call covers the whole house, no bouncing between contractors who each only know one product line. Our techs are background-checked, uniformed, and show up prepared for the job on the first visit. If the pane is not true, the job is not done.
FAQs
Many CGI doors carry a limited lifetime warranty on non-glass components and a separate guarantee on the laminated glass, but the exact coverage depends on the purchase date, the original installer, and whether the product was registered. We check both warranty layers before any repair and register our work in writing so nothing gets voided. Call (863) 208-5172 and we’ll pull the details for your specific door.
Yes. We follow CGI’s warranty-safe repair practices for doors under coverage, which means OEM parts where required and no modifications to the frame or glass that would give the manufacturer a reason to deny a future claim. For doors where the warranty has expired, we’ll present the aftermarket options that often outperform the original components.
Most roller replacements, alignment jobs, and weatherstripping swaps are done in under two hours on site. Track repairs or full panel rebuilds may take half a day. We carry common CGI hardware on our trucks, and we’ll tell you before we begin if a part needs to be ordered. Call (863) 208-5172 for a free estimate and we’ll give you a timeframe that’s actually accurate.
Replace the door when the frame is corroded through, the glass has a failed seal that’s fogging, or the hardware failures are repeating every couple of years. If the door is structurally sound and the problem is rollers, weatherstripping, or alignment, a repair gets you years more service for a fraction of replacement cost. We’ll be straight with you about which is which before any money changes hands.
Yes. We come out, diagnose the door, and give you a written line-item estimate before we start. No charge for the estimate, no obligation, and no surprise line items on the invoice. Call (863) 208-5172 to schedule yours.
Contact TruePane Windows & Doors for CGI Sliding Glass & Patio Doors in Davie
If your CGI slider is grinding, dragging, leaking, or just doesn’t lock the way it used to, call us. A person answers, you’ll get a straight answer about what’s wrong and what it costs to fix, and if we do the work, we stand behind it in writing. Call (863) 208-5172 for a free estimate today.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Davie and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.